Tent Flooring Cassette Deck (0.5Mx1M)

Tent Flooring Cassette Deck (0.5Mx1M)

Price: $224.99
Cassette decks are the perfect solution for tent flooring, events, VIPs or show flooring. They are the ideal mix between the classic 100% wood deck tiles and our standard stage decks.
The system can be used with the union clips or the quad union clips when leveling devices are not necessary.
When leveling devices are necessary, the leg brackets and leveling jacks can be used.
Another way to level the system, is by using the plastic pedestal system.
The cassette product offers a robust sub structure made of premium 6063 aluminium with a top quality Canadian Red Cedar finish. The cedar won't rot.
The modules come standard without any oil finish. On demand, we can pre-oil your decks for a fixed fee of 2 per square foot.
We offer a broad range of oil finishes for outdoor uses.
TO/GO Master Pack DTG-S6-LUMBER JOIST Adjustable Pedestal Support with Lumber Adaptor (Pack of 32) (8.07''-13.19'')

TO/GO Master Pack DTG-S6-LUMBER JOIST Adjustable Pedestal Support with Lumber Adaptor (Pack of 32) (8.07''-13.19'')

Price: $779.96
This pack contains 32 adjustable pedestal supports and 32 lumber adaptors.
The DTG-Adjustable Pedestal Support with Lumber Adaptor is used to connect standard wood profile or aluminum sub frame to the DTG-Adjustable Pedestal. You can install a regular 4''x4'', 2-2''x4'' or 2''x6'' beam inside the space of the Lumber Adaptor.
Available in different sizes: (Adjustable sizes shown with LUMBER ADAPTOR)
This product is :
DTG-S6 (205mm-335 mm) 8.07''-13.19''
* Remember that the heights shown above do not include the thickness of the raw lumber used.
NOTE: The DTG-Adjustable Pedestals can sustain a lot of load. However, the weakest link rapidly becomes the roof membrane of your rooftop. If you don't have accurate data of your roof, we normally suggest to use 1 device every 2' in each direction. You can choose to screw them (if necessary) to the existing surface.
****If you have a slope on your roof, we also offer the DTG-Slope Corrector, which allows for a much easier and even set up.
DTG-S6-LUMBER JOIST Adjustable Pedestal Support with Lumber Adaptor (Pack of 8) (8.07''-13.19'')

DTG-S6-LUMBER JOIST Adjustable Pedestal Support with Lumber Adaptor (Pack of 8) (8.07''-13.19'')

List Price: $209.99
Price: $209.99
The DTG-Adjustable Pedestal Support with Lumber Adaptor is used to connect standard wood profile or aluminum sub frame to the DTG-Adjustable Pedestal. You can install a regular 4''x4'', 2-2''x4'' or 2''x6'' beam inside the space of the Lumber Adaptor.
Available in different sizes: (Adjustable sizes shown with LUMBER ADAPTOR)
This product is :
DTG-S6 (205mm-335 mm) 8.07''-13.19''
* Remember that the heights shown above do not include the thickness of the raw lumber used.
NOTE: The DTG-Adjustable Pedestals can sustain a lot of load. However, the weakest link rapidly becomes the roof membrane of your rooftop. If you don't have accurate data of your roof, we normally suggest to use 1 device every 2' in each direction. You can choose to screw them (if necessary) to the existing surface.
****If you have a slope on your roof, we also offer the DTG-Slope Corrector, which allows for a much easier and even set up.