Water Heater Pilot Assembely Includes Pilot Thermocouple and Tubing Natural Gas

Water Heater Pilot Assembely Includes Pilot Thermocouple and Tubing Natural Gas

List Price: $13.49
Price: $13.49
NATURAL GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE STANDARD 24" LENGTH FITS MANY WATER HEATERS ON THE MARKET WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT The 113884-01 Fits Desa, Reddy, All-Pro, Universal, NR, Sears, Remington and many other Propane Forced Air Heaters Fit Models: RLP55V, RLP125V, REM55PV, REM125PV, 85-FAC, 125-F, TB115, SPC-85, SPC125, BLP55V, WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT
Honeywell Q3400A1024 30-Inch Igniter Flame Rod Assembly

Honeywell Q3400A1024 30-Inch Igniter Flame Rod Assembly

List Price: $51.95
Price: $49.50
Honeywell Q3400A1024 30 inch Igniter Flame Rod Assembly Honeywell 30" inch. Honeywell Q3400A1024 30 inch Igniter Flame Rod Assembly Product Specifications: Description 30" Igniter Flame Rod Assembly Lead Length (in.) 30 in. Used With SV9500, SV9600, Field replacement for Q3450, Q3480 hot surface pilot burner
Emerson 767A-372 Hot Surface Ignitor, 120V

Emerson 767A-372 Hot Surface Ignitor, 120V

List Price: $14.99
Price: $13.99
The White-Rodgers 767A-372 Hot Surface Ignitor features 5.25" leads, 200 Degree insulation, and Molex side lock connection with .092" male pins.
Uxcell a16030100ux0456 2M 6.6Ft 0.2x10mm Nichrome Flat Heater Wire for Heating Elements

Uxcell a16030100ux0456 2M 6.6Ft 0.2x10mm Nichrome Flat Heater Wire for Heating Elements

List Price: $7.21
Price: $7.21
Nichrome is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition,  lab inoculating loops, release mechanisms, ceramic support in kilns..
Whitfield Lennox Pellet Stove Igniter - H8127

Whitfield Lennox Pellet Stove Igniter - H8127

List Price: $39.99
Price: $37.61
Lennox Montage Pellet Stove Igniter - 12150213, H8127
Fire Brick Kit of 6 replacements for stoves, fire pits and pizza ovens

Fire Brick Kit of 6 replacements for stoves, fire pits and pizza ovens

List Price: $37.95
Price: $37.95
Hottie FireBricks can be used on... new fireplaces, replace old or broken bricks in existing fixtures, in wood or coal stoves, furnaces and fireplace inserts. Use our Refractory Cement (610) for mortar. The bricks measure 9" x 4-1/2" x 1 1/4".
120 V, 80 sq. ft. Nuheat Cable

120 V, 80 sq. ft. Nuheat Cable

List Price: $342.52
Price: $342.00
Nuheat Cable is a floor heating system that allows contractors to instantly make on-site adjustments to the floor heating coverage for any room including those with curves and angles. Nuheat Cable can be also used to heat wet areas such as shower beds and benches or saunas. Nuheat Cable can be controlled using teh same programmable and non-programmable thermostat options as Nuheat Mats.Installation: Patented Nuheat Cable Guides (included in each kit) are first secured onto the subfloor around the perimeter of the room. The Nuheat Cable Guides are superior to other clip systems as they are made of durable flexible plastic and lay flat on the subfloor to gaurantee a low profile. The heating cable is then installed and covered with self-leveler or thinset. After the self-leveler or thinset has cured, flooring can then be installed overtop.
Thermocouple 21925 Mr.Heater Heat Star Enerco MH125 HS125 LP and NG

Thermocouple 21925 Mr.Heater Heat Star Enerco MH125 HS125 LP and NG

List Price: $13.99
Price: $13.99
PRODUCT SPECIFICATIONS • LENGTH ◾ 18" • OUTER DIAMETER ◾ 3/16" • MATERIAL ◾ COPPER • WEIGHT ◾ .195 lb
uxcell 15M 49Ft 0.2x10mm Nichrome Flat Heater Wire for Heating Elements

uxcell 15M 49Ft 0.2x10mm Nichrome Flat Heater Wire for Heating Elements

List Price: $28.64
Price: $28.64
Nichrome is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
Emerson 120-106131 DC Power Solenoid, 12V, 80 Amp

Emerson 120-106131 DC Power Solenoid, 12V, 80 Amp

List Price: $16.90
Price: $16.90
The White-Rodgers 120-106131 12V DC Solenoid features SPNO terminal, and intermittent duty cycling with contact rating of 80 Amps and an inrush of 400 Amps. Temperature range: -20 degrees to +150 degrees F. Water resistant and dust resistant.