Battery Tender 081-0069-6 Ring Terminal Harness with Black Fused 2-Pin Quick Disconnect Plug

Battery Tender 081-0069-6 Ring Terminal Harness with Black Fused 2-Pin Quick Disconnect Plug

List Price: $7.99
Price: $4.11
Battery Tender Ring Terminal Harness is an accessory for use with multiple batteries. It is equipped with a black Quick Disconnect plug and is suitable for use with 12 volt models only. This ring terminal harness includes a 3-amp fuse and is 18 inches in length.
HYCLAT 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer

HYCLAT 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer

List Price: $89.99
Price: $13.59
This safety quick connect/disconnect connector kits are widely applied in various field. This kits always are equiped in Electrcar, folklift, electric folk truck, golf car, tour bus and many other power-driven tools to solve the power-out problem. The terminal pins are made of red copper coated by silver, which has a strong electrical conductivity and can reduce the resitance to make the current and voltage stable. The mark of positive and negative are printed in the conncetor to avoid the misplug. In the kit, a couple of boot caps are included to protect this quick connect and disconnect kist from the dust. Very easy to install:. 1.Strip the insulation to fit the terminal pins. 2.Insert the cable into the ternimal pins. 3. Crimp the terminal pins. 4.Insert terminal pins in housing with notched side of tongue next to spring. 5.Final adjustment Push contacts and cable into housing until the notched tongue snaps over end of spring; tug slightly to make sure contact is locked into place.. Package:2 connector ends, 4 terminal pins, and 2 rubber boot caps
HYCLAT Red 6-10 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer

HYCLAT Red 6-10 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer

List Price: $69.99
Price: $8.59
This safety quick connect/disconnect connector kits are widely applied in various field. This kits always are equipped in Electrcar, forklift, electric folk truck, golf car, tour bus and many other power-driven tools to solve the power-out problem. The terminal pins are made of red copper coated by silver, which has a strong electrical conductivity and can reduce the resistance to make the current and voltage stable. The mark of positive and negative are printed in the connector to avoid the misplug. In the kit, a couple of boot caps are included to protect this quick connect and disconnect kist from the dust. Very easy to install:. 1.Strip the insulation to fit the terminal pins. 2.Insert the cable into the terminal pins. 3. Crimp the terminal pins. 4.Insert terminal pins in housing with notched side of tongue next to spring. 5.Final adjustment Push contacts and cable into housing until the notched tongue snaps over end of spring; tug slightly to make sure contact is locked into place.. Package:2 connector ends, 4 terminal pins, and 2 rubber boot caps
BUNKER INDUST Battery Quick Connect Wire Harness Plug Kit 175A 1/0AWG Battery Cable Quick Connect Disconnect Plug for Winch Auto Car Trailer Driver Electrical Devices,2 Pcs,Red

BUNKER INDUST Battery Quick Connect Wire Harness Plug Kit 175A 1/0AWG Battery Cable Quick Connect Disconnect Plug for Winch Auto Car Trailer Driver Electrical Devices,2 Pcs,Red

List Price: $22.88
Price: $22.88
✌Specifications â‘ Color: Red ②Material: PC fire-retardant materials+stainless steel ③Rated Current: 175A â‘ŁGauge: 1/0 A.W.G ⑤Rated Voltage: UL rated at 600 volts DC or AC â‘ĄContacts material: copper plate with silver ⑦Fire rating: 94-V0 ⑧Connector Dimension: 3-1/8"" x 2-1/8"" x 1"" ⑨Terminal Pins Diameter: 0.5" â‘©Medium Withstanding Voltage: 2200DC â‘ŞConnect/disconnect Cycles: 10,000 times â‘«Operating Temperature Range:-4°F-221°F / -20°C-105°C ⑬Suitable For: UPS battery power connector✌How to Install ♥Insert the wires into the terminal pins, then solder or crimp them. ♥Insert the terminal pins into the connector housing and lock them in place ♥Operating Temperature Range: -4°F-221°F / -20°C-105°C ♥Connector Dimension: as the picture show ♥ Vibration Resistance: Excellent ♥Impact Resistance: High✌Package includes â—Ź2x Connectors â—Ź4x Terminal pins â—Ź2x Rubber boot caps
Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer

Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer

List Price: $13.99
Price: $13.99
Driver Recovery Products' quick connector set gives the user a simple, convenient way to connect and disconnect power to winches and other electrical devices. These are constructed of tough polycarbonate with a fitted rubber boot on each end to guard against dust, moisture, corrosion, and the elements. The connector ends are identical so that the user may connect either end to the power or load side. They are mated, meaning they connect in only one direction (polarity). The connectors are designed for low voltage use (12-36 volts DC). The set is compatible with any winch, but the ends may not match the connectors included with other brands. The connectors are suited for high-current use with winches rated 8,000 pounds or higher. The true rated capacity is 175 amps, although some dealers quote higher numbers for similar or even inferior connectors. Terminal pins are 0.35" in diameter and can accept up to a 4 gauge wire. Connectors measure 3-1/8" long x 2-1/8" wide x 1" thick and measure 5-1/4" x 2-1/8" x 1" when connected as a set. The set is easy to use; just insert the wires into the terminal pins, crimp or solder. The pins can then be inserted into the connector housing and lock in place. Each kit comes with a pair of connectors (2 connector ends, 4 terminal pins, and 2 rubber boot caps).
LITE-WAY 6-10 Gauge Battery Quick Disconnect/Connector Kit - 50A 8pcs Quick Connect/Disconnect Wire Harness Plug for Recovery Winch Trailer Driver Electrical Devices

LITE-WAY 6-10 Gauge Battery Quick Disconnect/Connector Kit - 50A 8pcs Quick Connect/Disconnect Wire Harness Plug for Recovery Winch Trailer Driver Electrical Devices

List Price: $45.95
Price: $25.95
Features: - Ultralight design - 100% safety tight rubber boot covers - Reliable combined shell made from polycarbonate - Simple installation Specifications: Model: Anderson type Wire Size: 0.05" - 0.52" Connector Dimension: 1.88" long x 1.37" wide x 0.5" thick Operating Temperature Range: -20°C - 105°C Medium Withstanding Voltage: 2200DC Impact Resistance: High Connect/disconnect Cycles: 10,000 times Wire Diameter: 6-16 AWG at most
OrionMotorTech 6-8 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Kit for Recovery Winch or Trailer | 12-36V DC, 50A

OrionMotorTech 6-8 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Kit for Recovery Winch or Trailer | 12-36V DC, 50A

List Price: $8.99
Price: $7.99
Description: [1]This connector kit allows for quick and convenient connect or disconnect of power from a winch or remote battery charger, trailer, etc. It is made of durable polycarbonate bearing over 10,000 connect or disconnect actions. The bottom of the devise features a fitted rubber boot to protect against dust, moisture and corrosion. [2]Both ends are suitable for connection to the power or load side because of its identical connectors. The connectors are ideal for 12-36 volts DC low-voltage and direct current use. [3]Featured with 0.25" inner diameter, the terminal pins accept wire from 6 to 8 gauge. [4]Easy to use and install. Insert the wires into the terminal pins, then solder or crimp them. Insert the terminal pins into the connector housing and lock them in place. Package Includes: One pair of connectors with 2 connector ends, 4 terminal pins, and 2 rubber boot capsSpecifications: Model: SC50 Connector Dimensions: 1-7/8" long x 1-3/8" wide x 1/2" thick Connected Set Dimensions: 3 3/16" long x 1 3/8" wide x 1/2"thick Operating Temperature Range:-4°F-221°F / -20°C-105°C Medium Withstanding Voltage: 2200DC Vibration Resistance: Excellent Impact Resistance: High Connect/disconnect Cycles: 10,000 times
Y Splitter EL Wire Quick Connect. Package of 4

Y Splitter EL Wire Quick Connect. Package of 4

List Price: $8.95
Price: $8.59
Y Splitter EL Wire Quick Connects. Compatible with all GlowCity EL Wire Kits, and most industry standard EL Wire Quick Connects. These 2-Way "Y" Splitter Connectors are reinforced with heat shrink on each connector for extra durability. There is one male end that plugs into the EL Wire Inverter which splits into two Female Connectors. Each Female Connector has 4 inches of lead wire and is the end that will plug into your EL Wire. Your EL Wire must already have a Male Quick Connect installed on it for it to be plugged into the "Y" Connector. This product can make working with EL Wire a breeze and give your solder gun a break. We think you will be very happy with the quality of these quick connects.
AURELIO TECH Universal 2-4 AWG 350A Battery Connect Quick Connector Plug For 12V Winch Trailer Driver Electrical Devices

AURELIO TECH Universal 2-4 AWG 350A Battery Connect Quick Connector Plug For 12V Winch Trailer Driver Electrical Devices

List Price: $16.99
Price: $16.99
Specification: Voltage: UL rated at 600 volts DC or AC Terminal pins diameter: 0.258" / 6.55mm Size: 3-1/8" x 2-1/8" x 1" Color: Red Capacity: 350 amps Compatibility: 2, 3, 4 Gauge Description: A robust and efficient "connect & disconnect" connector kit for a winch, remote battery charger, trailer or other electrical devices. Permitting over 10,000 connect and disconnect actions. It's made from polycarbonate, a versatile and tough plastic that offers great strength combined with light weight. The bottom of the plug is lined with rubber to protect against dust, moisture and corrosion. The connectors are ideal for 12-36 volts DC low-voltage, and low or medium direct current use. The ends are designed to connect in only one direction, making it impossible to connect the wrong polarities to one another- for increased safety and convenience. The terminal pins inner diameter is 0.258" and it can accept wires from 2 to 4 gauge. Installation and operation are very straightforward- simply insert the wires into the terminal pins, then fuse or crimp them (make sure you use a crimping tool and not a hammer). Then insert the terminal pins into the connector housing and lock them in place. Package Includes: A pair of connectors (2 connector ends, 4 terminal pins, and 2 rubber boot caps).
OrionMotorTech 4 Pcs 2-4 Gauge 175A Battery Cable Quick Connect Disconnect Plug Kit Recovery Winch Trailer | 12-36V DC (4 Pcs)

OrionMotorTech 4 Pcs 2-4 Gauge 175A Battery Cable Quick Connect Disconnect Plug Kit Recovery Winch Trailer | 12-36V DC (4 Pcs)

List Price: $31.99
Price: $29.99
Description: 1. This connector kit allows for quick and convenient connect/disconnect of power from a winch or from another electrical device such as a remote battery charger, trailer, etc. 2. The bottom of the device features a fitted rubber boot to protect against dust, moisture and corrosion. 3. It's very easy to use and install. Insert the wires into the terminal pins, then solder or crimp them. 4. Connector ends are identical, so either end is suitable for connection to the power or load side. 5. Although all the components of this connector can withstand high voltages, this connector is designed for low-voltage (12-36 volts DC) 6. Direct-current use (high-voltage connectors usually have a socket and plug arrangement, so the socket, or power end, can be fully enclosed). The terminal pins accept wire from 2 to 4 gauge. Package Includes: 2 Pair of Connectors: 4 connector ends, 8 terminal pins and 4 rubber boot caps Specifications: Model: SC175 Connector Size: 3-1/8 x 2-1/8 x 1 inches Connected Set Size: 5-1/4 x 2-1/8 x 1 inches Operating Temperature Range:-4°F-221°F / -20°C-105°C Medium Withstanding Voltage: 2200 DC Vibration Resistance: Excellent Impact Resistance: High Connect/Disconnect Cycles: 10,000 Times