Enerlites HET06A-White 1-5-10-15-20-30 Minutes Preset In-Wall Countdown Timer Switch, w Decorator Wall Plate, White

Enerlites HET06A-White 1-5-10-15-20-30 Minutes Preset In-Wall Countdown Timer Switch, w Decorator Wall Plate, White

List Price: $19.99
Price: $17.99
Enerlites HET06A is a 7-button countdown in wall timer switch with six time delay options giving great flexibility in light, ventilation fan control in bathroom, pantry, closet, laundry room, garage and more. The wall switch timer is ideal to control ventilation fan, ceiling fan and light in bathroom and laundry room where light and fan could be left on for a long time. By simply pushing the button to set your desired time delay from 1min, 5min, 10min, 15min and 30 minutes, your appliance will automatically turn off and never be inadvertently left on. Replace the normal switch for energy saving and convenience. By using the timer switch to control fan and light in the bathroom and laundry room, people have no worries that the fan might be left on for long time after shower. It is so convenient to just push the button and leave. The modern designed of the in wall countdown timer is designed to utilize current wiring and to replace an existing wall switch to control ventilation/ceiling fan, light and motor by setting the countdown time. This fan timer switch works with any household ventilation Fans including Panasonic whisper ceiling bathroom fans, ceiling mounted fans and bathroom vent fan with light. Beautiful bright blue LED indicators show the chosen time delay of your timer and STAYS ON for easy locating in dark. Use HET06A timer switch to control ventilation fan to keep bathroom/laundry room fresh, mildew and mold away. For bedroom light/ceiling fan control, use HET06 timer switch with 5min to 4hours time setting is ideal. HET06A-R also has time override feature and regular ON/OFF function with the big button. Bathroom exhaust fan and light control: HET06A+TDOS5 Sensor Switch For bathroom, multi-gang HET06A timer fan control with a motion sensor as light controller fits in any standard wall box and can be multi-ganged with other devices. Neutral wire is required for installation. Single pole application.
KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K177-1005

KB Electronics 8811012 Solid State Variable Speed AC Electric Motor Control, 5.0 Max amp, 115V, # K177-1005

List Price: $16.67
Price: $13.99
Control provides infinite variable speed for shaded pole and PSC motors. Max amps means that the rated motor name plate amperage can not exceed this rating or you will damage the control and motor. Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft (direct drive) to cool motor. Not to be used with gear motors. Controls that have been installed are not returnable.
Ancor 252265 Marine Grade Electrical Heavy Duty Tinned Copper Lugs (2-Gauge, Size 5/16 Screw, 2-Pack)

Ancor 252265 Marine Grade Electrical Heavy Duty Tinned Copper Lugs (2-Gauge, Size 5/16 Screw, 2-Pack)

List Price: $6.46
Price: $0.99
Marine Grade lugs. Heavy-duty, pure copper for max. current flow. Tinned for corrosion resistance & easy soldering. Seamless barrel for max. strength. Closed end to seal out moisture. Funnel entry for easy wire insertion.
Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

List Price: $19.99
Price: $13.99
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and robotics applications. Important notice: Some customers reported they bought this model from other seller under this listing, but found much of difference with our description(no connector and shorter leads). We highly recommend you report this problem to Amazon if you have same experience. If you are a new buyer, please pay attention to our ID is "STEPPERONLINE", and our P/N is "17HS19-2004S1". Electrical Specification: * Manufacturer Part Number: 17HS19-2004S1 * Motor Type: Bipolar Stepper* Step Angle: 1.8 deg. * Holding Torque: 59Ncm(83.6oz.in)* Rated Current/phase: 2.0A* Phase Resistance: 1.4ohms* Inductance: 3.0mH+/-20%(1KHz) Physical Specification: * Frame Size: 42 x 42mm * Body Length: 48mm * Shaft Diameter: 5mm * Shaft Length: 24mm * D-cut Length: 15mm * Number of Leads: 4 * Lead Length: 1m with connector * Weight: 390g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

List Price: $36.99
Price: $6.89
Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 1x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4
Casolly Variable Fan Speed Controller for Exhaust Duct Inline Fan

Casolly Variable Fan Speed Controller for Exhaust Duct Inline Fan

List Price: $30.00
Price: $17.95
Specifications: Material: plastic / aluminum Voltage Capacity:120 Volts Current Capacity: 15amps Dimensions: 4-3/8"(L) 2-9/16"(W) 2-3/4"(H) Line core: 2m/6 ft. Plug:3-pole , American(grounded) Weight:0.95lbs Package Include 1x speed control 1x manual It is widely used for controlling heating elements, motors (be careful here, it only works with certain types of motor). You just plug in the power cord and you can use the 3-way switch for Var(iable), Off, and Full. It is speed to be able to handle 15 amps (1500W). WARNING:When using tool,basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Don't use it on brushless type motors. Works with any universal AC/DC brush type motor, 15 amps and under.
DC Motor Controller, DROK DC 6-90V 15A DC Motor Speed Controller, Universal 0.01-1000W 16kHz PWM Stepless Brushed Motor Control, Variable Speed Control Generator Kit with Output Voltage LED Display

DC Motor Controller, DROK DC 6-90V 15A DC Motor Speed Controller, Universal 0.01-1000W 16kHz PWM Stepless Brushed Motor Control, Variable Speed Control Generator Kit with Output Voltage LED Display

List Price: $22.99
Price: $22.99
Product Parameters: Voltage range: DC 6-90V (cannot be used in AC) Current range: Rated current 8A (max. current 15A); Quiescent Current 0.005A (standby mode) Power range: 0.01-1000W PWM frequency: 16kHz Fuse specification: 15A ceramic arc fast-melting fuse. Polarity of motor: No need to distinguish the positive side and the negative side when you connect the motor and you can adjust the order of the wires to change the direction. Using Instruction & Considerations: 1. The input of the DC motor speed regulator must be DC input, cannot be connected to AC input (e.g. Household AC 220V), otherwise, the motor speed regulator will be burnt. 2. The positive side and the negative side of DC power supply cannot be reversed connected, or the motor speed regulator will be damaged. 3. No need to distinguish the positive side or the negative side of the motor.When the operating direction cannot meet your expectation, you can adjust the order of the wires to change the direction. 4. Adjusting the potentiometer knob can change the duty ratio of the output of the motor speed regulator, and then change the speed of the motor. Package Includes: 1* DC Motor Speed Controller
Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

List Price: $49.99
Price: $9.89
Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 2x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4
Dremel 90930-05 Carbon Motor Brush Set

Dremel 90930-05 Carbon Motor Brush Set

List Price: $3.89
Price: $3.99
Stepper Motor Nema 17, DROK 40mm High Torque Bipolar DC Step Motor Kit, 0.46Nm Low Noise 42 2-Phrase Universal Electric Motor DC motor for 3D Printer Laser Engraving

Stepper Motor Nema 17, DROK 40mm High Torque Bipolar DC Step Motor Kit, 0.46Nm Low Noise 42 2-Phrase Universal Electric Motor DC motor for 3D Printer Laser Engraving

List Price: $12.99
Price: $12.99
Product Parameters: Product name: Bipolar 42 Stepper Motor Holding torque: 0.46 Nm/ 65 oz-in Working voltage: DC 9-42V Rated current: 1.7A Resistance: 2.1 ohm Inductance: 4mH Rotor inertia: 55gcm2/ 0.30oz-in2 Weight: 0.28kg Length: 39.5mm/ 1.56 inch Phrase: 2 Step angle: 1.8° Motor frame size: 42*42mm Wiring: Black (A+); Green (A-); Red (B+); Blue (B-) Application: Stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; 3D printer; automation equipment Warm Tips: Please note that this motor cannot be connected to the power supply directly. It should be connected to a constant current driver, otherwise, it will destroy the motor. Please ensure that the output current is not higher than the rated current of the motor (1.7A) or exceed the working voltage range of the motor (DC 9-42V). Product Includes: 1* 42 Stepper Motor