AstroAI Digital Multimeter with Ohm Volt Amp and Diode Voltage Tester Meter

AstroAI Digital Multimeter with Ohm Volt Amp and Diode Voltage Tester Meter

List Price: $19.99
Price: $9.89
The AstroAI AM33D Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses. Use this multimeter for: household outlets, fuses, wiring, general-purpose batteries, vehicle battery and charging system, automotive circuits and more.Note:1. When the Meter is working at an effective voltage over 60V in DC or 30V rms in AC, special care should be taken because there is a danger of electric shock.2. Before using the Meter, inspect the exterior casing. Do not use the Meter if it is damaged or if all or part of the exterior casing is removed. Look for cracks or missing plastic. Pay special attention to the insulation around the connectors.3. If you have mistakenly connected the red test lead to the 500mA selection, then used this meter to test larger current(like 10A) or higher voltage, it might probably burn out the wires even the meter.4. If you are the beginner, you should have known some basic physical concecpts and basic methods of using a meter, you also should have read the user manual carefully and known the consequences of misuse because any misuses will probably cause serious results.5. This multimeter can not be used to test EMF.SpecificationsMax.display: 1999, 3 1/2 digitsRange selection: Manual rangingOverload display: "1" is displayedSampling Speed: 2 times per secondLow Battery IndicationPower: 1 x 9V 6F22 Battery IncludedDiode Test: YesContinuity Test: YesSquare Wave Output: YesDimensions: 5.1" x 2.8" x 1.4"Safety/Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulationDC Voltage: 200mV/2000mV/20V/200V ±(0.5%+3), 500V (1%+5)AC Voltage: 200V/500V ±(2%+10)DC Current: 2000μA/20mA ±(1.8%+2), 200mA ±(2%+2), 10A ±(2%+10)Resistance: 200Ω ±(1%+10), 2000Ω/20KΩ/200KΩ ±(1%+4), 20MΩ ±(1%+10), 200MΩ ±[5%(reading-10)+10]Package Includes1 x AstroAI AM33D Digital Multimeter1 x 9V 6F22 Battery2 x Test Leads1 x User Manual
Etekcity Digital Multimeter, MSR-R500 Electronic Amp Volt Current Ohm Voltage Meter Ammeter Multimeters with Diode and Continuity Test Tester, Backlight LCD Display (Red)

Etekcity Digital Multimeter, MSR-R500 Electronic Amp Volt Current Ohm Voltage Meter Ammeter Multimeters with Diode and Continuity Test Tester, Backlight LCD Display (Red)

List Price: $26.99
Price: $9.99

Do It All, and Then Some

The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator, continuity buzzer, and overload protection. It's tough rubber sleeve protects it from the drops and falls associated with the toughest jobs.  

Built for Everyday Use

A Data Hold function keeps the measurements displayed on the MSR-R500 while you record them and a larger display makes the MSR-R500 multimeter even easier to read. Add in the LCD backlight and protective rubber bumper and this is the meter for every job.  

Specifications

Safety/Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulation Max.display: 1999, 3 1/2 digits Range selection: Manual ranging Overload display: Display OL Sampling Speed: 2 times per second Power: 1 x 9V 6F22 Battery Included (Low Battery Indication) Diode Test: Yes Continuity Test: Yes Square Wave Output: Yes Dimensions: 5.1" x 2.9" x 1.4" DC Voltage: 200mV/2000mV/20V/200V ± (0.5%+2), 500V (0.8%+2)  AC Voltage: 200V/500V ± (2%+10) DC Current: 2000μA/20mA ± (1%+2), 200mA ± (1.2%+2), 10A ± (2%+5) Resistance: 200Ω ± (0.8%+5), 2000Ω/20KΩ/200KΩ ± (0.8%+2), 20MΩ ± (1%+5), 200MΩ ± [5%(reading-10)+10]   

Package Includes

1 x Etekcity MSR-R500 Digital Multimeter 2 x Test Leads (pair)  1 x GP Supercell 6F22 9V Battery 1 x User's Manual
Digital Multimeter, Auto Ranging Multimeter, Clamp Meter Multimeters with AC/DC Voltage, Backlit LCD Display, Current, Resistance, Diode, 600V overvoltage, Continuity Test for Home Use Hand Tools

Digital Multimeter, Auto Ranging Multimeter, Clamp Meter Multimeters with AC/DC Voltage, Backlit LCD Display, Current, Resistance, Diode, 600V overvoltage, Continuity Test for Home Use Hand Tools

List Price: $38.99
Price: $11.99
Specifications: - Max Display: 1999, 3 1/2 Digits  - Range Selection: Manual Ranging  - Overload Display: "1" Is Displayed  - Sampling Speed: 2-3 Times Per Second  - Low Battery Indication  - Power: 1 x 9V 6F22 Battery (Included)  - Diode Test: Yes  - Continuity Test: Yes  - Square Wave Output: Yes  - Dimensions: 130mm*73.5mm*35mm/ 5.11*2.89*1.38  - Safety/ Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulation  - DC Voltage: 200mV/2000mV/20V/200V (0.5%+2), 500V (0.8%+5)  - AC Voltage: 200V/500V (1.2%+10)  - DC Current: 2000μA/20mA (1.%+2), 200mA (1.2%+2), 10A (2%5)  - Resistance: 200Ω (0.8%+5), 2000Ω/20KΩ/200KΩ (0.8%+2), 20MΩ (1%+5), 200MΩ [5%(reading-10)+10]  - Frequency: 20kHz (1.5%+5) Package Contents: 1 x Digital LCD Multimeter  2 x Test Leads  1 x User Manual  1 x 9 V Battery Note: ● Read SAFETY INSTRUCTIONS carefully before use! ● Only use the multimeter as specified in these instructions to ensure its safety features are not compromised. ● In the Operating Instructions, a Warning indicates conditions and measures that expose the user to risks or can damage the multimeter or equipment being tested. ● A Note indicates information to which the user must pay particular attention. ● The international electrical symbols used in these instructions and which are displayed on the instrument's LED display screen are explained on page 2. Warranty Guarantee: - 24/7 Customer Service - 12-Month Replacement Warranty - 60-Day Money Back Guarantee Please contact us directly if need any help
Sperry Instruments GFI6302 GFCI Outlet / Receptacle Tester, Standard 120V AC Outlets, 7 Visual Indication / Wiring Legend, Home & Professional Use, Yellow & Black

Sperry Instruments GFI6302 GFCI Outlet / Receptacle Tester, Standard 120V AC Outlets, 7 Visual Indication / Wiring Legend, Home & Professional Use, Yellow & Black

List Price: $13.99
Price: $7.99
Tests standard 3-wire and GFCI protected 120V outlets for 7 common wiring errors. GFCI function tests GFCI and standard outlets wired in series with GFCI outlets (e.g. multiple outlets in kitchen or bath). Neon lamps indicate 7 common wiring conditions with the wiring condition legend easily visible on top and bottom of tester. Tester offers a compact ergonomic design with over-molded rubber grips. UL/CAS/Intertek, CAT III 300V Operational Voltage Range: 120V AC Frequency: 60Hz
Innova 3320 Auto-Ranging Digital Multimeter

Innova 3320 Auto-Ranging Digital Multimeter

List Price: $19.99
Price: $19.99
The INNOVA 3320 is a Auto-Ranging Multimeter designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's auto-ranging scales eliminate the need to dial in the correct range when making electronic measurements. The 10 MegOhm input is safe for automotive and household uses (i.e., household outlets, fuses, wiring, general-purpose batteries, vehicle battery and charging system, automotive circuits and more). The color-coded LEDs allow you to quickly check household batteries (green = good, yellow = weak and red = replace). Includes attachable test leads, holders and stand for hands free use and features protective rubber corner guards for drop protection. The INNOVA 3320 has a single setting resistance function for AC and DC voltage.
Etekcity MSR-C600 Digital Clamp Meter Multimeters, Auto-Ranging Multimeter AC/DC voltmeter with Voltage, AC Current, Amp, Volt, Ohm, Diode and Resistance Test Tester

Etekcity MSR-C600 Digital Clamp Meter Multimeters, Auto-Ranging Multimeter AC/DC voltmeter with Voltage, AC Current, Amp, Volt, Ohm, Diode and Resistance Test Tester

List Price: $58.65
Price: $22.99
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.SpecificationsSafety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulationDisplay: Maximum display 1999Range selection: Auto rangingOverload display: Display OL or OLMeasurement Speed: Updates 3 times/secondMax.Jaw Opening: 28mm diameterTested Max. Current Conductor Size: 26mm diameterDiode test: YesContinuity test: YesBattery Life: about 150hours (alkaline battery)AC Current:-Range and Accuracy: 2A{<1A, ± (4%+40); ≥1A, ± (3%+30)}, 20A{≤4A, ± (3%+12), >4A, ± (2%+8)},  200/400A ± (1.5%+5)- Overload Protection: 400A rms AC Voltage:- Range and Accuracy: 2/20/200V ± (1.2%+5), 600V± (1.5%+5)- Input Impedance: 10 MΩ<100pF- Overload Protection: 600V rmsDC Voltage:- Range and Accuracy: 200mV ± (0.8%+3); 2/20/200V± (0.8%+1); 600V± (1%+3)- Input Impedance: 10 MΩ- Overload Protection: 600V rms Resistance:- Range and Accuracy: 200Ω ± (1.2%+2); 2/20/200KΩ ± (1%+2); 2MΩ ± (1.2%+2), 20MΩ ± (1.5%+2)- Input Impedance: 10 MΩ- Overload Protection: 600VpPackage Includes1 x Etekcity Digital Clamp Meter2 x Test Leads (a pair)2 x AAA 1.5V batteries (installed)1 x Carrying Bag1 x User Manual
Etekcity Digital Multimeter, MSR-A600 Electrical Volt Amp Ohm Voltage Tester Auto-Ranging Multimeters voltmeter Ammeter with AC/DC Current Resistance Continuity Capacitance and REL Diode Test Meter

Etekcity Digital Multimeter, MSR-A600 Electrical Volt Amp Ohm Voltage Tester Auto-Ranging Multimeters voltmeter Ammeter with AC/DC Current Resistance Continuity Capacitance and REL Diode Test Meter

List Price: $29.99
Price: $17.99
The Etekcity MSR-A600 Digital Multimeter is the perfect startup multimeter for hobbyists, entry-level electricians, and general household uses. The convenient auto-ranging operation allows you to select the right measurement range when working on a variety of components. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, capacitance, and diode testing. Use this multimeter for household outlets, fuses, wiring, general-purpose and vehicle batteries, automotive circuits and more. Especially great for building and working with your own personalized electronics and other creations. Specifications Safety/Compliances: IEC61010, CAT.II 600V over voltage and double insulation Display: Maximum display 1999 Range selection: Auto ranging Overload display: Display OL Measurement Speed: Updates 3 times/second Diode test: Yes Continuity test: Yes DC Current: -Range and Accuracy: 200/2000μA ± (1.0%+2); 20/200mA ± (1.0%+2); 2/10A ± (1.2%+5) AC Current: -Range and Accuracy: 200/2000μA ± (1.2%+3); 20/200mA ± (1.2%+3); 2/10A ± (1.5%+5) AC Voltage: - Range and Accuracy: 200mV ± (1.0%+2); 2V ± (0.7%+3); 20 ± (1.0%+3); 200/600V ± (1.2%+3) DC Voltage: - Range and Accuracy: 20mV ± (0.7%+3); 200mV ± (0.7%+3); 2000mV ± (0.5%+2); 200/600V± (0.7%+3) Resistance: - Range and Accuracy: 200Ω ± (1.0%+2); 2/20/200KΩ ± (0.8%+2); 20MΩ ± (1.2%+5), 200MΩ ± (5.0%+5) Capacitance: - Range and Accuracy: 2nF Under REL mode ± (4%+10); 20/200nF ± (3%+10); 20/200/2000μF ± (3%+5), 2mF ± (3%+10) Package Includes 1 x Etekcity Digital MSR-A600 Multimeter 2 x Test Leads (a pair) 2 x AAA 1.5V batteries (installed) 1 x User Manual
AstroAI Digital Multimeter, TRMS 6000 Counts Volt Meter Manual and Auto Ranging; Measures Voltage Tester, Current, Resistance, Continuity, Frequency; Tests Diodes, Transistors, Temperature, Red

AstroAI Digital Multimeter, TRMS 6000 Counts Volt Meter Manual and Auto Ranging; Measures Voltage Tester, Current, Resistance, Continuity, Frequency; Tests Diodes, Transistors, Temperature, Red

List Price: $49.99
Price: $35.99
The AstroAI True RMS Multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything. Run tests on diodes and transistors while being able to measure voltage, current, resistance, continuity, capacitance, and frequency, all on one device. This multimeter is designed to be used in commercial settings, but can also be brought home to use with automotive or household electrical problems. SpecificationsDigital Display: 5 ¾ , 6000Sampling Speed: 2 times per secondRange Selection: Auto or ManualPolarity IndicationOverload IndicationLow Battery IndicationPower: 1 x 9V 6F22 Battery IncludedTemperature Test: YesTransistor Test: YesDiode Test: YesContinuity Test: YesExternal Current Test: YesCapacitance: YesFrequency: YesSafety/Compliances: EN61010-1 CAT III 600V, CATII 1000VDC Voltage: 600mV/6V/60V/600V ±(0.8%+3), 1000V (1%+5)AC Voltage: 600mV ±(1.2%+8); 6V/60V/600V ±(1.2%+6); 750V ±(1.2%+8)Temperature: -40°C~1370°C; -40°F~2000°F (1-5%+4 depending on temp)DC Current: 600μA/6000μA/60mA/600mA ±(0.8%+5); 6A/10A ±(1.5%+3)Transistor hFE: PNP & NPN (lb≈2μA; Vce≈1V)Resistance: 600Ω/6KΩ/60KΩ/600KΩ/6MΩ ±(1.5%+3); 60MΩ ±(1.5%+5)Capacitance: 60nF/600nF/6μF/60μF/600μF/60mFFrequency: 0~60MHz ±(1%+5) Package Includes1 x AstroAI WH5000A True RMS Digital Multimeter1 x Test Leads (Pair)1 x K-Type Thermocouple1 x Multi-Function Socket1 x User Manual
Fluke 117 Electricians True RMS Multimeter

Fluke 117 Electricians True RMS Multimeter

List Price: $214.99
Price: $156.40
With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. In fact, users around the world have said their 117 is an investment in accuracy. The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease.
AstroAI Digital Clamp Meter, Multimeter Volt Meter with Auto Ranging; Measures Voltage Tester, AC Current, Resistance, Continuity; Tests Diodes, Red/Black

AstroAI Digital Clamp Meter, Multimeter Volt Meter with Auto Ranging; Measures Voltage Tester, AC Current, Resistance, Continuity; Tests Diodes, Red/Black

List Price: $39.99
Price: $19.99
The AstroAI 202D Clamp Meter is designed to be used safely and accurately by anyone. It's design is easy and safe to use with advanced features like Auto-Ranging built right into the meter's design. Run tests on diodes while still being able to measure AC/DC voltage, AC current, resistance, and continuity, all with the same device. This Clamp Meter is designed to be used safely, with it's integrated Clamp for measuring AC Current without having to physically contact the hot part of a wire. Specifications Max. display: 2000 Counts LCD Size: 30*49mm Range Select: Auto Operating Temperature: 32℉~104℉(0℃~40℃),less than 80% Relative Humidity Storage Temperature: 14℉~122℉(-10℃~50℃),less than 85% Relative Humidity Battery Type: 1.5V x 2 AAA Batteries AC Voltage Test: Yes DC Voltage Test: Yes AC Current Test: Yes Resistance Test: Yes Continuity Test: Yes Diodes Test: Yes Package Contents 1 x AstroAI Digital Clamp Meter 1 x Test Leads (Pair) 2 x AAA batteries 1 x User Manual 1 x Carrying Bag