Gorilla 2 Part Epoxy, 5 Minute Set.85 ounce Syringe, Clear

Gorilla 2 Part Epoxy, 5 Minute Set.85 ounce Syringe, Clear

List Price: $5.49
Price: $2.99
Gorilla Epoxy, .85 oz., Clear
J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz.

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz.

List Price: $5.27
Price: $3.49
J-B Weld KwikWeld Quick Setting Steel Reinforced EpoxyJ-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300 degrees F.Great for:
  • Household Repairs
  • Automotive
  • Plumbing
  • Marine
  • Crafts and More
  • Use on:
  • Automotive
  • Brick
  • Concrete
  • Fiberglass
  • Metal
  • And more
  • Instructions1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.4. Dry: Sets in 6 minutes. Cures 4 hours. If temperature is below 40 degrees F, then set time is longer.J-B Weld is proudly made in the USA
    J-B Weld 8280 Original Professional Size Steel Reinforced Epoxy - 10 oz.

    J-B Weld 8280 Original Professional Size Steel Reinforced Epoxy - 10 oz.

    List Price: $15.23
    Price: $9.41
    J-B Weld Original Cold-Weld Formula Steel Reinforced EpoxyJ-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.Use on:
  • Automotive
  • Brick
  • Concrete
  • Epoxy and Adhesives
  • Fiberglass
  • Metal
  • And more
  • Instructions1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.4. Dry: Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.J-B Weld is proudly made in the USA
    J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick - 2 oz.

    J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick - 2 oz.

    List Price: $8.66
    Price: $6.99
    J-B Weld HighHeat Epoxy PuttyHighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400 degrees F and intermittent heat exposure to 550 degrees F.Use on:
  • Automotive
  • Metal
  • And more
  • Instructions1. Cut:Remove required amount of putty.2. Mix: Thoroughly knead putty with fingers to a uniform color.3. Apply: Press putty firmly to the surface to be repaired.J-B Weld is proudly made in the USA
    Permatex 25909-12PK Liquid Metal Filler, 3.5 oz. (Pack of 12)

    Permatex 25909-12PK Liquid Metal Filler, 3.5 oz. (Pack of 12)

    List Price: $26.99
    Price: $26.99
    Permatex Liquid Metal Filler is a specialty adhesive which offers ideal solutions for many automotive bonding jobs. This easy-to-use filler can be drilled, filed, sanded and painted and forms a long-lasting, metal-tough bond. Works on metal, wood, and concrete and is an excellent adhesion to galvanized metal. This filler also repairs cracks or porosity leaks in cast metal parts and fills small holes, cracks, and perforations. As complements to a full line of super glues, these products make a more complete adhesive set, while the tried and true formulas guarantee consumer satisfaction.
    J-B Weld 8270 KwikWeld Industrial Professional Size - 10 oz.

    J-B Weld 8270 KwikWeld Industrial Professional Size - 10 oz.

    List Price: $16.99
    Price: $13.87
    J-B Weld KwikWeld Quick Setting Steel Reinforced EpoxyJ-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300 degrees F.Great for:
  • Household Repairs
  • Automotive
  • Plumbing
  • Marine
  • Crafts and More
  • Use on:
  • Automotive
  • Brick
  • Concrete
  • Fiberglass
  • Metal
  • And more
  • Instructions1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.4. Dry: Sets in 6 minutes. Cures 4 hours. If temperature is below 40 degrees F, then set time is longer.J-B Weld is proudly made in the USA
    Permatex 84209 PermaPoxy 4-Minute Multi-Metal Epoxy - Two 1 oz. Tubes, (Pack of 12)

    Permatex 84209 PermaPoxy 4-Minute Multi-Metal Epoxy - Two 1 oz. Tubes, (Pack of 12)

    List Price: $56.01
    Price: $55.82
    Permatex PermaPoxy 4-Minute Multi-Metal Epoxy is a versatile, easy-to-use, multi-metal, two-part epoxy adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes with no clamping needed and has a dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents, with a permanent strength up to 4500 PSI. Temperature range of -60 degrees Fahrenheit to 300 degrees Fahrenheit. Permatex offers convenient solutions for a wide range of bonding applications. Available in many packaging configurations, Permatex epoxies are versatile and easy-to-use. From general-purpose to material-specific, Permatex offers a formulation that will work for you.
    J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

    J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

    List Price: $6.93
    Price: $4.18
    J-B Weld SteelStik Epoxy Putty StickSteelStik is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. SteelStik sets in 3-5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. SteelStik cures to a dark grey color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300 degrees F.Use on:
  • Automotive
  • Brick
  • Ceramic
  • Concrete
  • Metal
  • Under Water/Wet
  • And more
  • Instructions1. Cut:Remove required amount of putty.2. Mix: Thoroughly knead putty with fingers to a uniform color.3. Apply: Press putty firmly to the surface to be repaired.J-B Weld is proudly made in the USA
    BSI BSI-202 Quick-Cure 5Min Epoxy Bob Smith Ind, 9 oz.

    BSI BSI-202 Quick-Cure 5Min Epoxy Bob Smith Ind, 9 oz.

    List Price: $13.33
    Price: $10.41
    Quick-cure 5 min. Epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quick-cure shouldn't be used in areas that are subject to long-term immersion in water, however, it works fine for the internal structure of wood framed boats. Quikcure is our only epoxy on which you can apply polyester resins. It can be mixed with micro balloons to form a quick setting putty. Items bonded with quik-cure can be handled after 15 minutes. Full strength is reached in 1 hour.