Fuji AG1C World Hot Melt Glue

Fuji AG1C World Hot Melt Glue

List Price: $4.99
Price: $6.28
For rod building and repair. Individually carded.
Surebonder DT-2010 Made in the USA All Purpose Stick Glue Sticks-All Temperature-Clear 7/16" D, 10" L Glue Stick-20 Sticks per Bag (2 Bags)

Surebonder DT-2010 Made in the USA All Purpose Stick Glue Sticks-All Temperature-Clear 7/16" D, 10" L Glue Stick-20 Sticks per Bag (2 Bags)

List Price: $19.75
Price: $18.98
Surebonder All Temperature Glue Sticks works at either low temperature (230 degrees F) or high temperature (380 degrees F) for everyday gluing projects. Use with hot or low temperature glue guns. Bonds to metal, wood, paper, fabric, magnets, ceramics, floral arrangements, glass and plastic using a high temperature glue gun. Bonds to delicate materials such as balloons, ribbon, lace and children's crafts using a low temperature glue gun. Clear color with 60-65 second working time. 7/16 -inch diameter by 10-inch length. 20 sticks per bag. Sold as Pack of 2 Bags.
FastenMaster FMFLEX180 Hot Melt Adhesive Glue for HB220 Glue Gun

FastenMaster FMFLEX180 Hot Melt Adhesive Glue for HB220 Glue Gun

List Price: $17.49
Price: $13.36
Fasten master has replaced the popular Ub8012 hot melt glue by PAM with Fmflex40 and FMFLEX180. The HB220 hot melt glue gun can easily create a high strength bond between carpet tack strips or metal clips and finished concrete, fiber cement backer board, or wood prior to the carpet being stretched over a floor. The major advantages in using Fmflex40 glue with the HB220 gun are strength of the bond and the quick 5- minute set up time of the adhesive. This allows the carpet installer greater productivity by not having to come back the next day or wait hours for the adhesive to fully cure before stretching carpet. The Fmflex40 must be applied at the pre-set temperature of 390 degrees on the HB220 glue gun in order to achieve maximum bond strength and an open time of 40 seconds. For project that may need longer than 40 second working time use FMFLEX180. Fastenmaster's new FMFLEX180 gives you 180 seconds of working time with a full bond time in 8 minutes. Fmflex 180 is strong enough to be used in hardwood floor starter and finish rows, interior wood trim, bullnose, t-molding and many, many more applications.
3M 3792Q-5/8-8 Hot-melt Adhesive (1 lb each)

3M 3792Q-5/8-8 Hot-melt Adhesive (1 lb each)

List Price: $36.38
Price: $24.99
3M(TM) Hot Melt Adhesive 3792 Q is used for wood, select plastics, corrugated, lightweight substrates on furniture, upholstery and novelties. See the applicator guide below for your dispensing options.
ETEPON ET021 Mini Heat Gun Electric 300W Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools

ETEPON ET021 Mini Heat Gun Electric 300W Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools

List Price: $15.89
Price: $11.89
ETEPON multi function hand-hold portable convenient mini heat gun is a great heat tool for DIY crafts. ►High quality ABS anti-slip hand-hold part outside have high temperature resistance►The temperature control device and micro-circulation cooling system inside will always keep you safe►Heat up to 200°C/390°F quickly within few seconds►Two professional heat vents reduce the internal temperature of the heat gun and extend its life►100° adjustment stainless steel stand, flexible & self-support►300W save energy & environmentally friendly►On/Off switch give more safeWidely Uses for DIY♥ Embossing powder♥ Heat-shrinkable film♥ Clay♥ Rubber stamp♥ Fast-drying paint, glue, catalytic adhesive bonding♥ Rapid thawing♥ Shrink PVC for packaging♥ Seal wax patterning♥ DIY handmade soap or candleGeneral FeaturesSize: 220*43mm / 8.7*1.7inchs, wire length 91cm/36inchsType: Constant temperatureWorking temperature: About 200°C / 390°F Rated power: 300WPower type: AC power supplyRated voltage:110vPower:50-60HzPacking Lists:1*Hot Air Gun 1*Detailed InstructionsWarm Tips for Using1.Keep 3-5cm distance from your amazing work and to heat it at about a 45 degree angle until completed. With the 45 degree it can avoid heat suck. 2.Do not blow the object directly with the hot air gun at 90 degrees.3.The working time of the hot air gun is about 5 minutes each time. If you feel that the temperature of the handing part is obviously increased, please turn off the heat gun and wait for it to cool before use.4.Do not place the outlet against people or other creatures to avoid burns.5.Do not use the touch air outlet under high temperatures. Children must be accompanied by adults to use it.
Esste 30W Mini Hot Glue Gun Kit-High Temperature Repair Tool With Gun Stand Socket and 25 Pieces Melt Glue Sticks for DIY Craft Projects Strong Bond (hot gun)

Esste 30W Mini Hot Glue Gun Kit-High Temperature Repair Tool With Gun Stand Socket and 25 Pieces Melt Glue Sticks for DIY Craft Projects Strong Bond (hot gun)

List Price: $14.99
Price: $14.99
Product power: 30W
Gun mouth material: aluminum
Gun mouth diameter: 1.5mm
Working voltage: 110V
Wire length: 1.4m
PRACTICALITY: Heating quickly, a fast plastic, suitable for a variety of workplaces, can also be used for glass, ceramics, wood, cloth, paper, plastic and other items, but also to fill gaps in windows and doors, patch floor tiles, DIY handmade jewelry And linked to the paste.
Precautions:
1、Do not open the switch when not in use for a long time to place.
2、A plastic mouth temperature higher work do not touch, please stay away from children.
3、Placed in a dry and ventilated place, pay attention to clean.
4、Do not use inferior glue stick, in order to avoid impurities blocking the outlet.
5、About 3-5 minutes ahead of time cut off the power, such as plastic run out, the temperature down, the plastic will not melt and flow out due to power.
Ewparts Glue Sticks (7mm/15colors)

Ewparts Glue Sticks (7mm/15colors)

List Price: $13.99
Price: $13.99
Specifications: 1.Main Material: EVA 2.Diameter: 7mm / 0.27inch 3.Length: 100mm / 3.93inch 4.Melt Temperature: 160~180℃ 5.Set Time: 8 to 10 seconds 6.Used In: 20W-30W hot glue gun 7.Color : 15 colors (each color 5 pcs) Wht's in the package? 75 pcs x glue stick 5 pcs each color ,total 75 pcs
3M Hot Melt Adhesive 3762 Q Tan, 5/8 in x 8 in, 11 lb per Case

3M Hot Melt Adhesive 3762 Q Tan, 5/8 in x 8 in, 11 lb per Case

List Price: $247.53
Price: $121.00
3M 3762 Q tan hot melt adhesive is compatible with chipboard, foam, paper, uncoated cardboard and wood materials. Additionally, this hot melt adhesive is a high melt adhesive with a melting point of +201.2 F. Diameter of the 3762 Q hot melt adhesive is 5/8 in. Delivers great performance with a shear strength of 545 psi and peel strength of 7 piw.
3M 3748Q-5/8-8 Hot-melt Adhesive (1 lb each)

3M 3748Q-5/8-8 Hot-melt Adhesive (1 lb each)

List Price: $40.96
Price: $40.96
3M 3792LM-TC-5/8-2 Hot-melt Adhesive (1 lb each)

3M 3792LM-TC-5/8-2 Hot-melt Adhesive (1 lb each)

List Price: $39.80
Price: $22.95