Qualihome Drywall and Hollow-wall Anchor Assortment Kit, Anchors, Screws, Wall Anchor Hooks, and Hollow-door Toggle, 112 Pieces

Qualihome Drywall and Hollow-wall Anchor Assortment Kit, Anchors, Screws, Wall Anchor Hooks, and Hollow-door Toggle, 112 Pieces

List Price: $7.99
Price: $7.99
Kit Includes: Anchors: #6- #8 Plastic Anchor, 22 Pieces. #10- #14 Plastic Anchor, 5 Pieces. #6 Auger Anchors, 6 Pieces. #8 Auger Anchors, 4 Pieces. 3/16" - 1/4" Wall Anchor Hooks, 6 Pieces. Drywall Anchors, 6 Pieces. Hollow Door Anchors, 6 Pieces . Pan Head Phillips Sheet Metal Screws: #6 x 3/4 inch, 6 Pieces. #6 x 1 inch, 22 Pieces. #8 x 1 inch, 4 Pieces. #10 x 1-1/4" inch, 15 Pieces. Hello Dear Shopper, We hope that you found the product you need, But if this is not the product you were looking for, don't worry we still have a bunch of related products that might suit your needs, Check out the list below, and if you find something you like, just copy the link into your browser and it will take you to the item.
#1 Best Quality Small Hardware Nail and Brad Assortment Kit, 550 Pieces http://www.amazon.com/dp/B01BRURGRQ Household Assortment Kit, Cup Hooks, Picture Hangers, Push Pins, Thumb Tacks, Brads, Plastic Anchors, Screws and Nails, 360 Pieces. http://www.amazon.com/dp/B01AH4VUG6 Stove Bolts, Nuts, and Washer Assortment Kit, 108 Pieces http://www.amazon.com/dp/B019PXB6Z0 Qualihome Picture Hangers Assortment Kit, 80 Pieces http://www.amazon.com/dp/B0184OZS7S Qualihome #10-12 x 1" Blue Ribbed Plastic Anchor Kit with Screws and Masonry Drill Bit (201-Pieces) http://www.amazon.com/dp/B017J97MVE Qualihome Drywall and Hollow-wall Anchor Assortment Kit, Anchors, Molly Bolts, Screws, and Toggle Bolts, 100 Piece. http://www.amazon.com/dp/B012Q2OBGI
12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER

12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER

List Price: $12.94
Price: $11.99
Mount anything! The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors. The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Best Quality Plastic Self Drilling Drywall Anchors with Screws Kit, 100 Pieces All Together, Anchors Made in USA

Best Quality Plastic Self Drilling Drywall Anchors with Screws Kit, 100 Pieces All Together, Anchors Made in USA

List Price: $11.75
Price: $11.75
Feel Free To check out our Other Items, You Might find Something That Suit Your Needs, Just copy paste the link in your browser and it will take you to the item
Drywall Screws
http://www.amazon.com/dp/B06VVXHD7G
Picture Hangers Assortment Kit, 80 Pieces
http://www.amazon.com/dp/B0184OZS7S
Zinc Self Drilling Drywall Anchors with Screws
https://www.amazon.com/dp/B013SBBUGK
Anchor Assortment Kit, Anchors, Molly Bolts, Screws, and Toggle Bolts
https://www.amazon.com/dp/B012Q2OBGI
Pan head Phillips Drive Sheet Metal Screws
https://www.amazon.com/dp/B01GBTT018
Bolts, Nuts, and Washer Assortment
https://www.amazon.com/dp/B019PXB6Z0
Plastic Drywall Wall Anchors Screw Assortment Kit 300 Pieces

Plastic Drywall Wall Anchors Screw Assortment Kit 300 Pieces

List Price: $13.99
Price: $13.99
Leanking strives to manufacture best possible products for our customers ,we love our customers and emphasis on user experience ,we never finished improving our products! This kit of anchors is very useful to settle small projects without having to leave home. The package comes with plastic anchors and screws, ideal for hanging panels, decorative items, pictures and mirrors on plaster or concrete walls. Perfect for blinds, shelf, arts and so on. Providing a flush, clean appearance in drywall. Plastic (nylon) drywall anchors and Stainless Steel Screws ensure long time use. Unique design increase holding power. The screws will go in easily and securely without breaking. Different size and colors will meet your any requirement. Good Assortment box with specification label to improve your work efficiency. Instructions 1. Drill hole with drill bit. 2. Clean the hole and embed the drywall anchor through the object to be fixed. 3. Screw the self-tapping screw. 4. The fixing is done. Kit include: 5*60MM Anchor Screws 20PCS(White) 5* 80MM Anchor Screws 20PCS(White) 6*30MM Anchor Screws 40PCS(White)6*25MM Anchor Screws 40PCS(Yellow) 6*30MM Anchor Screws 40PCS(Yellow) 6*40MM Anchor Screws 20PCS(Yellow) 8*40MM Anchor Screws 20PCS(Yellow) 6*26MM Anchor Screws 40PCS(Grey) 6*25MM Anchor Screws 40PCS(Green) 8*38MM Anchor Screws 20PCS(Green) one-year product replacement warranty - No Risk.
TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 10)

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 10)

List Price: $11.74
Price: $10.01
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
MediaDrill DiameterBolt DescriptionUltimate Tensile Strength ValuesUltimate Shear Strength Values
1/2" Drywall1/2"3/16"-24 UNC zinc-plated steel238 lb.247 lb.
5/8" Drywall1/2"3/16"-24 UNC zinc-plated steel356 lb.298 lb.
1/2" Drywall with 25 Gauge Stud*1/2"3/16"-24 UNC zinc-plated steel412 lb.Not Available
5/8" Drywall with 25 Gauge Stud*1/2"3/16"-24 UNC zinc-plated steel462 lb.Not Available
Concrete Block1/2"3/16"-24 UNC zinc-plated steel802 lb.Not Available

*Failure measured as breakage of drywall portion.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
What’s in the Box?
  • (10) TOGGLER SNAPTOGGLE BA toggle anchors
  • (10) 3/16"-24 UNC bolts
TOGGLER SnapSkru Self-Drilling Drywall Anchor, Pack of 20

TOGGLER SnapSkru Self-Drilling Drywall Anchor, Pack of 20

List Price: $8.74
Price: $7.35
Self-drilling no pre-drilled hole required. Higher load-bearing capability and screw size range than other self-drilling drywall anchors. Built-in "positive-stop" prevents over-driving the anchor when using a screw gun or hand drill. Activate and lock with an audible "POP", providing positive feedback that they are installed correctly. Resist vibration and shock. Provide high pull-out resistance. Do not back out of the wall when the screw is removed. Can be removed easily, without damaging wall. Unique tip prevents "walking" to ensure accurate and easy drilling. When activated with a screw anchor opens with an audible pop locking the anchor on the wall. Drywall gypsum and its paper are kept in compression and thereby immediately reinforced. Built-in positive stop that prevents overdriving the anchor when using a screw gun. 20 pack Regular SnapSkru 3/8" - 5/8" drywall thickness #8 x 1-1/2" combo screws 1-1/4" + thickness of item being anchored #6, #7, #8 (preferred), #10 Self-drilling no pre-drilled hole required Regular: 0.62"dia. head, 5/16" dia., 1-5/8" length Higher load-bearing capability and screw size range than other self-drilling drywall anchors Built-in positive-stop prevents over-driving the anchor when using a screw gun or hand drill Activate and lock with an audible POP, providing positive feedback that they are installed correctly Resist vibration and shock Provide high pull-out resistance Do not back out of the wall when the screw is removed Can be removed easily, without damaging wall Unique tip prevents "walking" to ensure accurate and easy drilling When activated with a screw anchor opens with an audible pop locking the anchor on the wall Drywall gypsum & its paper are kept in compression & thereby immediately reinforced Built-in positive stop that prevents overdriving the anchor when using a screw gun.
Ansoon Zinc Self-Drilling Drywall Anchors with Screws Kit, 50 Pieces

Ansoon Zinc Self-Drilling Drywall Anchors with Screws Kit, 50 Pieces

List Price: $21.99
Price: $9.79
High-quality Zinc Self-Drilling Anchor with Screws Kit Includes 25pcs Zinc Anchors and 25pcs #8 x 1-1/4'' Phillips Screws and a Plastic Case Applicable to 3/8", 1/2" or 5/8" gypsum wallboard, No Pre-Drilling Needed, Anchors can be Removed
Vastar 200 Pieces Drywall and Hollow-wall Anchor Assortment Kit, Anchors, Screws, Wall Anchor Hooks, and Hollow-door Toggle

Vastar 200 Pieces Drywall and Hollow-wall Anchor Assortment Kit, Anchors, Screws, Wall Anchor Hooks, and Hollow-door Toggle

List Price: $9.99
Price: $9.99
Specification:

Weight: 0.66lb APRX.

The ribs on the plastic anchors prevent the anchor from turning in the hole during installation, The split in the ribbed anchors expand on two opposing sides as you tighten the screw, creating a strong hold in drywall

These screws are zincification screwsnot easy to rust

Toggle bolts can be Used in Drywall, Hollow Block, Plaster, Tile

  Package included:  #6- #8 Plastic Anchor, 42 Pieces  #10- #14 Plastic Anchor, 42 Pieces  #6 Auger Anchors, 5 Pieces #8 Auger Anchors, 5 Pieces 3/16” - 1/4” Wall Anchor Hooks, 6 Pieces  Drywall Anchors, 8 Pieces Hollow Door Anchors, 10 Pieces

Pan Head Phillips Sheet Metal Screws: #6 x 3/4 inch, 42 Pieces #6 x 1 inch, 10 Pieces #8 x 1 inch, 22 Pieces #10 x 1-1/4 inch, 8 Pieces

 

Notes:

The nail set is relatively small and suitable for home carpentry work. Warranty: 18-month warranty. For any question, please feel free to contact us. We will get back to you within 24 hours

Ribbed Plastic Drywall Anchor Kit with Screws and Masonry Drill Bit, #10-12 x 1"

Ribbed Plastic Drywall Anchor Kit with Screws and Masonry Drill Bit, #10-12 x 1"

List Price: $10.99
Price: $10.99
Kit Includes: 100 #10-12 x 1" Plastic anchors, 100 #10 x 1-1/4'' Screws, One 1/4'' x 4'' Masonry Drill Bit & Plastic Case These plastic anchors are intended for light duty anchoring applications and offer extra support for loads. The split in the ribbed anchors expand on two opposing sides as you tighten the screw. Ribs prevent the anchor from turning in the hole during installation. The split in the anchor ensures three way expansion on sides for increased holding power. Once installed, they provide a flush, clean appearance in drywall. The anchor's fins prevent the anchor from turning in the hole during and after installation. The split in the anchor ensures three way expansion on sides for increased holding power. Used with sheet metal, wood and lag screws in hollow walls. Can be used in light masonry or masonry block applications. Requires a pre-drilled hole for installation. Installing anchors correctly is key to a strong hold that lasts.