AAG SP10-38 Asphalt Anchor for 3/8" bolts, 1,500 lb. pull rated. (6 pack)

AAG SP10-38 Asphalt Anchor for 3/8" bolts, 1,500 lb. pull rated. (6 pack)

List Price: $42.00
Price: $42.00
The SP10-38 is used in conjunction with our EPX2 grout to bond with existing asphalt. Constructed from zinc plated steel, the bottom of the anchor is flared and sealed to act as a wedge when pushing the anchor into the ground. A welded spiral along the length of the anchor provides for a strong bond with the grout. The top of the anchor incorporates a large washer with internal female 3/8" thread accommodating up to 2" of thread. Supplied with 1" washer and 3/8" x 1" hex-head bolt. Requires EPX2 grout, one half a bag per anchor.
Happijac 182852 Anchor Bolt and Hardware

Happijac 182852 Anchor Bolt and Hardware

List Price: $20.55
Price: $20.55
Happijac continues to offer their time tested Camper Anchor tie downs. The scientific design of Happijac Camper Anchor tie downs gives maximum strength while eliminating leverage and stress forces on the truck. Removable rear tie down coupler rotates to direction of pull, eliminating undesirable torque. Happijac Camper Anchor tie downs won???t bend, twist or fail.
Grip Rite Prime Guard 1210GAB50 Grip Rite Hot Dipped Galvanized Anchor Bolt with Nut and Round SAE Washer 1/2-inch by 10-inch 50 per box

Grip Rite Prime Guard 1210GAB50 Grip Rite Hot Dipped Galvanized Anchor Bolt with Nut and Round SAE Washer 1/2-inch by 10-inch 50 per box

List Price: $34.99
Price: $20.44
Hot dipped Galvanized Bolts are recommended when working with treated lumber. This product meets ASTM A307 specifications.
AAG Asphalt Anchor and grout kit AK-4

AAG Asphalt Anchor and grout kit AK-4

List Price: $49.00
Price: $49.00
This is a ready-to-use kit of 4 SP10 asphalt anchors and a matching quantity of EPX2 grout. The SP10-38 is used in conjunction with our EPX2 grout to bond with existing asphalt. Constructed from zinc plated steel, the bottom of the anchor is flared and sealed to act as a wedge when pushing the anchor into the ground. A welded spiral along the length of the anchor provides for a strong bond with the grout. The top of the anchor incorporates a large washer with internal female 3/8" thread accomodating up to 2" bolts. Supplied with 1" washer and 3/8" x 1" hex-head bolt.
MKT Steel Conset Masonry Screw Anchor, Phillips Flat Head, 3/16" Diameter x 1-3/4" Length (Box of 100)

MKT Steel Conset Masonry Screw Anchor, Phillips Flat Head, 3/16" Diameter x 1-3/4" Length (Box of 100)

List Price: $17.50
Price: $17.50
MKT Fastening steel conset masonry screw anchor. Commonly known as "Tapcon". Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.
The Hillman Group 370826 Hex Head Sleeve Anchor, 5/16 X 2-1/2-Inch, 35-Pack

The Hillman Group 370826 Hex Head Sleeve Anchor, 5/16 X 2-1/2-Inch, 35-Pack

List Price: $20.99
Price: $20.73
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.
4x15x1/2 Eye Anchor

4x15x1/2 Eye Anchor

List Price: $7.19
Price: $9.93
EYE ANCHOR - Ideal for anchoring storage sheds, Fences, Car Ports, Gazebos, Boats, Tents, Airplanes, Awnings, Pool Covers, Propane tanks, Grills, Tarps, Trellis/Arbors and Playground Equipment, Trees. Installs by simply turning into ground using steel tube or bar.
Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 3/8" Diameter, 5" Length, 3-1/4" Threaded Length (Pack Of 20)

Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 3/8" Diameter, 5" Length, 3-1/4" Threaded Length (Pack Of 20)

List Price: $47.33
Price: $47.33
The Wej-It Ankr-TITE ATS wedge anchor with 304 stainless steel body provides a secure hold in solid masonry and uncracked concrete, meets Federal Specifications QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code. The anchor body, washer, nut, and clip are made of 304 stainless steel for increased corrosion resistance compared to galvanized or zinc-plated steel anchors. It must be installed into a drilled hole with a diameter equal to that of the anchor to an embedment depth of 1-3/4" or greater. The washer lies flush against the mounting surface when the anchor is inserted into the hole, and the nut tightens with a wrench to draw the threaded portion of the anchor up, causing the clip to expand and secure the anchor in place. The clip has large dimples that provide traction to reduce slippage and increase hold in lightweight concrete. The dog point prevents damage during installation, and the safety shoulder above the clip provides support when the anchor is under severe strain.
Specifications
Ultimate Tensile Strength for Static Loads
Anchor DiameterAt Embedment Depth4,000-psi Concrete6,000-psi Concrete
1/4"1-1/4"2,000 lb.2,042 lb.
1/4"2-1/2"2,600 lb.2,826 lb.
3/8"1-3/4"3,850 lb.4,790 lb.
3/8"4-5/8"6,020 lb.6,635 lb.
1/2"2-1/8"6,324 lb.7,540 lb.
1/2"6-1/4"8,249 lb.10,713 lb.
5/8"2-5/8"9,527 lb.10,597 lb.
5/8"6"15,893 lb.16,705 lb.
3/4"3-3/4"13,130 lb.18,979 lb.
3/4"7-7/8"19,795 lb.24,145 lb.
7/8"4"16,591 lb.19,945 lb.
7/8"8"27,484 lb.33,113 lb.
1"5"26,676 lb.30,683 lb.
1"9"36,171 lb.36,171 lb.
1-1/4"5-5/8"28,733 lb.28,733 lb.
1-1/4"10"50,390 lb.50,390 lb.

Ultimate Shear Strength for Static Loads
Anchor DiameterAt Embedment Depth4,000-psi Concrete6,000-psi Concrete
1/4"1-1/4"2,811 lb.2,811 lb.
1/4"2-1/2"2,811 lb.2,811 lb.
3/8"1-3/4"3,075 lb.3,075 lb.
3/8"4-5/8"4,227 lb.4,227 lb.
1/2"2-1/8"6,260 lb.6,260 lb.
1/2"6-1/4"7,516 lb.7,516 lb.
5/8"2-5/8"9,760 lb.9,760 lb.
5/8"6"11,743 lb.11,743 lb.
3/4"3-3/4"15,860 lb.15,860 lb.
3/4"7-7/8"23,817 lb.23,817 lb.
7/8"4"24,000 lb.24,000 lb.
7/8"8"25,710 lb.25,710 lb.
1"5"32,494 lb.32,494 lb.
1"9"36,896 lb.36,896 lb.
1-1/4"5-5/8"46,975 lb.46,975 lb.
1-1/4"10"46,975 lb.46,975 lb.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's literature.Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.
uxcell 20pcs 304 Stainless Steel M4x50mm Hex Bolts w Nuts and Washers Assortment Kit

uxcell 20pcs 304 Stainless Steel M4x50mm Hex Bolts w Nuts and Washers Assortment Kit

List Price: $10.60
Price: $10.60
304 Stainless Steel constructed provides great corrosion resistance and antirust ability for a long service life.
Used for assembly fastening, fits with the nuts and washers for fastening the connection of two parts.
Widely applicable for indoor or out door in automotive, industrial, shipbuilding, household etc.
Wej-It Ankr-TITE ATG Wedge Anchor, Carbon Steel, Galvanized Finish, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 1/2" Diameter, 8-1/2" Length, 5" Threaded Length (Pack Of 10)

Wej-It Ankr-TITE ATG Wedge Anchor, Carbon Steel, Galvanized Finish, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 1/2" Diameter, 8-1/2" Length, 5" Threaded Length (Pack Of 10)

List Price: $31.22
Price: $31.22
The Wej-It Ankr-TITE ATG wedge anchor with galvanized carbon steel body provides a secure hold in solid masonry and uncracked concrete, meets Federal Specifications QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code. The anchor consists of a galvanized carbon steel body, a zinc-coated carbon steel washer and nut, and a 304 stainless steel clip. It must be installed into a drilled hole with a diameter equal to that of the anchor to an embedment depth of 2-1/8" or greater. The washer lies flush against the mounting surface when the anchor is inserted into the hole, and the nut tightens with a wrench to draw the threaded portion of the anchor up, causing the clip to expand and secure the anchor in place. The clip has large dimples that provide traction to reduce slippage and increase hold in lightweight concrete. The dog point prevents damage during installation, and the safety shoulder above the clip provides support when the anchor is under severe strain.
Specifications
Ultimate Tensile Strength for Static Loads
Anchor DiameterAt Embedment Depth4,000-psi Concrete6,000-psi Concrete
1/4"1-1/4"2,000 lb.2,042 lb.
1/4"2-1/2"2,600 lb.2,826 lb.
3/8"1-3/4"3,850 lb.4,790 lb.
3/8"4-5/8"6,020 lb.6,635 lb.
1/2"2-1/8"6,324 lb.7,540 lb.
1/2"6-1/4"8,249 lb.10,713 lb.
5/8"2-5/8"9,527 lb.10,597 lb.
5/8"6"15,893 lb.16,705 lb.
3/4"3-3/4"13,130 lb.18,979 lb.
3/4"7-7/8"19,795 lb.24,145 lb.
7/8"4"16,591 lb.19,945 lb.
7/8"8"27,484 lb.33,113 lb.
1"5"26,676 lb.30,683 lb.
1"9"36,171 lb.36,171 lb.
1-1/4"5-5/8"28,733 lb.28,733 lb.
1-1/4"10"50,390 lb.50,390 lb.

Ultimate Shear Strength for Static Loads
Anchor DiameterAt Embedment Depth4,000-psi Concrete6,000-psi Concrete
1/4"1-1/4"2,811 lb.2,811 lb.
1/4"2-1/2"2,811 lb.2,811 lb.
3/8"1-3/4"3,075 lb.3,075 lb.
3/8"4-5/8"4,227 lb.4,227 lb.
1/2"2-1/8"6,260 lb.6,260 lb.
1/2"6-1/4"7,516 lb.7,516 lb.
5/8"2-5/8"9,760 lb.9,760 lb.
5/8"6"11,743 lb.11,743 lb.
3/4"3-3/4"15,860 lb.15,860 lb.
3/4"7-7/8"23,817 lb.23,817 lb.
7/8"4"24,000 lb.24,000 lb.
7/8"8"25,710 lb.25,710 lb.
1"5"32,494 lb.32,494 lb.
1"9"36,896 lb.36,896 lb.
1-1/4"5-5/8"46,975 lb.46,975 lb.
1-1/4"10"46,975 lb.46,975 lb.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's literature.Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.