Ribbed Plastic Drywall Anchor Kit with Screws and Masonry Drill Bit, #10-12 x 1"

Ribbed Plastic Drywall Anchor Kit with Screws and Masonry Drill Bit, #10-12 x 1"

List Price: $10.99
Price: $10.99
Kit Includes: 100 #10-12 x 1" Plastic anchors, 100 #10 x 1-1/4'' Screws, One 1/4'' x 4'' Masonry Drill Bit & Plastic Case These plastic anchors are intended for light duty anchoring applications and offer extra support for loads. The split in the ribbed anchors expand on two opposing sides as you tighten the screw. Ribs prevent the anchor from turning in the hole during installation. The split in the anchor ensures three way expansion on sides for increased holding power. Once installed, they provide a flush, clean appearance in drywall. The anchor's fins prevent the anchor from turning in the hole during and after installation. The split in the anchor ensures three way expansion on sides for increased holding power. Used with sheet metal, wood and lag screws in hollow walls. Can be used in light masonry or masonry block applications. Requires a pre-drilled hole for installation. Installing anchors correctly is key to a strong hold that lasts.
220 Piece Wall Anchor Assortment Storehouse

220 Piece Wall Anchor Assortment Storehouse

List Price: $9.36
Price: $6.98
This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical. This set includes six sizes of sturdy polyethylene wall anchors. Simply drill a hole the same size as your wall anchor, push the anchor in and insert a screw into the anchor!
Hilitchi 42-Pcs [6-Sizes] Metal Zinc Plated Steel Hollow Wall Anchors Assortment Kit for Drywall Heavy Duty Molly Bolt Set

Hilitchi 42-Pcs [6-Sizes] Metal Zinc Plated Steel Hollow Wall Anchors Assortment Kit for Drywall Heavy Duty Molly Bolt Set

List Price: $14.85
Price: $14.85

Hilitchi 42pcs 6 Sizes Metal Zinc Plated Steel Hollow Wall Anchors Heavy Duty Molly Bolt Set

Notes: a drill bit is not included in the package.

FEATURES:

Great holding power
Strong hardness
No rust
Wide application
Installation quick and easy
Improve work efficiency

Size & Package :

6 * 52mm anchors ×4pcs
6 * 65mm anchors ×4pcs
5 * 52mm anchors ×6pcs
5 * 65mm anchors ×6pcs
4 * 32mm anchors ×12pcs
4 * 60mm anchors ×10pcs
A storage box × 1pcs
Item package quantity: 42pcs

Application method:

a.Drill a hole (diameter in sync with the anchor)
b.Insert it in the hole
c.Use a wall anchor setting tool to clasp the pin head then pull the pin out halfway and at this time, the split of anchor would expand to create a snug fit into the wall
d.Screw in the screw and job's finished

We offer a wide selection of various types/sizes fasteners. We suit all your needs.
Hilitchi 24-Pcs [3-Sizes] 35mm 46mm 59mm Long Hollow Wall Drive Anchors Assortment Kit Zinc Plated Steel Heavy Duty Philips Round Headed Molly Bolt Drive for Drywall

Hilitchi 24-Pcs [3-Sizes] 35mm 46mm 59mm Long Hollow Wall Drive Anchors Assortment Kit Zinc Plated Steel Heavy Duty Philips Round Headed Molly Bolt Drive for Drywall

List Price: $9.85
Price: $9.85

Hilitchi Long Hollow Wall Drive Anchors Assortment Kit Zinc Plated Steel Heavy Duty Philips Round Headed Molly Bolt Drive for Drywall

Notes: a drill bit is not included in the package.

FEATURES:

Great holding power
Strong hardness
No rust
Wide application
Installation quick and easy
Improve work efficiency

Application method:

A.drill a hole (depth and diameter in sync with the anchor)
B.poke the anchor through the hole
C.unscrew the screw to 4-5mm from the top
D.use a wall anchor setting tool to press the screw down and job's finished

Size & Package :

35mm Hollow wall drive anchors ×10pcs
46mm Hollow wall drive anchors ×8pcs
59mm Hollow wall drive anchors ×6pcs
A storage box × 1pcs
Item Package Quantity:24pcs

We offer a wide selection of various types/sizes fasteners. We suit all your anchoring needs.
MEECO'S RED DEVIL 5020 Stovepipe Anchor Screws

MEECO'S RED DEVIL 5020 Stovepipe Anchor Screws

List Price: $13.99
Price: $13.98
Stovepipe Anchor Screws: ALL single-wall vent pipe should be screwed together at each joint with a minimum of 3 screws. #8 x 18 x 1/2", self-drilling HEX head screws with a black oxide finish.
CONFAST 1/4" x 3" Hammer Drive Anchor (100 per Box)

CONFAST 1/4" x 3" Hammer Drive Anchor (100 per Box)

List Price: $29.99
Price: $29.99
ApplicationsThe anchor is made from ZAMAC. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/4".Length Anchor The length of the anchor is 3"Minimum EmbedmentThe minimum anchor embedment into the concrete is 3/4". Therefore, the anchor must be installed so that a minimum of 3/4" of the anchor is embedded into the concrete.Spacing between AnchorsEach anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
Powers Fastening Innovations 05512 Spike Anchor - 3/16-Inch by 4-Inch Mushroom Head Grade 8.2 Carbon Steel Pre-Expanded Anchor, 100 Per Box

Powers Fastening Innovations 05512 Spike Anchor - 3/16-Inch by 4-Inch Mushroom Head Grade 8.2 Carbon Steel Pre-Expanded Anchor, 100 Per Box

List Price: $50.23
Price: $42.00
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.
Simpson Strong Tie PHT-38 Hammer Drive tool - 1/4in barrel (1)

Simpson Strong Tie PHT-38 Hammer Drive tool - 1/4in barrel (1)

List Price: $16.21
Price: $16.21
Simpson Strong-Tie PHT-38 Hammer Drive tool - 1/4" barrel
Simpson Strong Tie CSD25312 Simpson Strong-Tie Countersunk Head Zinc Plated Split Drive Anchor 1/4-inch by 3-1/2-inch 100 per Box

Simpson Strong Tie CSD25312 Simpson Strong-Tie Countersunk Head Zinc Plated Split Drive Anchor 1/4-inch by 3-1/2-inch 100 per Box

List Price: $31.38
Price: $31.38
The Split Drive anchor is a one piece anchor, with a split-type expansion mechanism on the working end. As the anchor is driven into the hole, the expansion mechanism compresses and exerts force against the walls of the hole. Can be installed in concrete, grout-filled block and stone. Available in mushroom, countersunk and duplex-head styles. The duplex head Split Drive is designed for temporary fastening applications and can be removed using a claw hammer.
Powers Fastening Innovations 05532 Spike Anchor - 1/4-Inch by 4-Inch Mushroom Head Grade 8.2 Carbon Steel Pre-Expanded Anchor, 100 Per Box

Powers Fastening Innovations 05532 Spike Anchor - 1/4-Inch by 4-Inch Mushroom Head Grade 8.2 Carbon Steel Pre-Expanded Anchor, 100 Per Box

List Price: $51.15
Price: $49.99
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.