Loop Loc Aluminum Tamp Tool For Installing Brass Anchors

Loop Loc Aluminum Tamp Tool For Installing Brass Anchors

List Price: $10.59
Price: $9.50
Aluminum Tamp Tool For Installing Brass Anchors
Wej-It ST Setting Tool for Wej-It Drop-In Anchors, Compatible with 1/4"-20 threaded Wej-It Drop-In Anchors

Wej-It ST Setting Tool for Wej-It Drop-In Anchors, Compatible with 1/4"-20 threaded Wej-It Drop-In Anchors

List Price: $7.01
Price: $7.01
The Wej-It ST14 setting tool assists in the secure installation of Wej-It drop-in anchors (sold separately). After the anchor has been inserted into the drilled hole, the smaller diameter of the setting tool inserts into the anchor and the back end of the tool is struck with a hammer (sold separately), expanding the anchor within the hole.
Compatible Drop-In Anchors
Wej-It ST Setting ToolCompatible Wej-It Drop-In Anchors
ST12WD12, WDL12, WDS12, WDSS12, WDU12
ST14WD14, WDL14, WDS14, WDSS14
ST34WD34, WDS34, WDSS34
ST38WD38, WDL38, WDS38, WDSS38, WDU38
ST58WD58, WDS58, WDSS58

Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.
CONFAST 1/4" (Inside/Screw 1/4" diameter) Drop-In Anchor Zinc Plated with 1 Setting Tool (100 per box)

CONFAST 1/4" (Inside/Screw 1/4" diameter) Drop-In Anchor Zinc Plated with 1 Setting Tool (100 per box)

List Price: $11.29
Price: $11.29
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 3/8" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.Spacing between AnchorsEach anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.
CONFAST 3/4" (Inside/Screw 3/4" diameter) Coil Drop-In Anchor Zinc Plated with 1 Setting Tool (30 per box)

CONFAST 3/4" (Inside/Screw 3/4" diameter) Coil Drop-In Anchor Zinc Plated with 1 Setting Tool (30 per box)

List Price: $84.99
Price: $84.99
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Minimum EmbedmentThe minimum anchor embedment into the concrete is 3-3/16". Therefore, the anchor must be installed so that a minimum of 3-3/16" of the anchor is embedded into the concrete.Spacing between AnchorsEach anchor must be spaced a minimum distance of 10" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 5" from an unsupported edge of the concrete.
Powers Fastening Innovations 06335 Mini-Dropin - 1/4-Inch Internal Thread Carbon Steel Mini Drop In Expansion Anchor, 100 Per Box

Powers Fastening Innovations 06335 Mini-Dropin - 1/4-Inch Internal Thread Carbon Steel Mini Drop In Expansion Anchor, 100 Per Box

List Price: $25.65
Price: $25.65
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.
ITW Red Head LDT-3830 3/8" x 3" Large Diameter Tapcon (LDT) Anchor 50 Per Box

ITW Red Head LDT-3830 3/8" x 3" Large Diameter Tapcon (LDT) Anchor 50 Per Box

List Price: $44.29
Price: $44.19
ITW Red Head Tapcon, Type: Tapcon, Style: Large diameter zinc plated, Size: 3/8" x 3", Package Quantity: 50 per box
Powers Fastening Innovations 6304SD 1/4-Inch Smart Diand Carbon Steel Drop In Anchor, 100 Per Box

Powers Fastening Innovations 6304SD 1/4-Inch Smart Diand Carbon Steel Drop In Anchor, 100 Per Box

List Price: $22.25
Price: $19.99
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.
Powers Fastening Innovations 06305 Drop In Setting Tool For All 1/4-Inch Internal Thread Powers Only Drop In Anchors, 1 Per Box

Powers Fastening Innovations 06305 Drop In Setting Tool For All 1/4-Inch Internal Thread Powers Only Drop In Anchors, 1 Per Box

List Price: $7.54
Price: $2.20
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.
Powers Fastening Innovations 06309 Drop In Setting Tool For All 1/2-Inch Internal Thread Powers Only Drop In Anchors, 1 Per Box

Powers Fastening Innovations 06309 Drop In Setting Tool For All 1/2-Inch Internal Thread Powers Only Drop In Anchors, 1 Per Box

List Price: $11.30
Price: $3.93
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.
Wej-It ST Setting Tool for Wej-It Drop-In Anchors, Compatible with 3/8"-16 threaded Wej-It Drop-In Anchors

Wej-It ST Setting Tool for Wej-It Drop-In Anchors, Compatible with 3/8"-16 threaded Wej-It Drop-In Anchors

List Price: $8.59
Price: $3.33
The Wej-It ST38 setting tool assists in the secure installation of Wej-It drop-in anchors (sold separately). After the anchor has been inserted into the drilled hole, the smaller diameter of the setting tool inserts into the anchor and the back end of the tool is struck with a hammer (sold separately), expanding the anchor within the hole.
Compatible Drop-In Anchors
Wej-It ST Setting ToolCompatible Wej-It Drop-In Anchors
ST12WD12, WDL12, WDS12, WDSS12, WDU12
ST14WD14, WDL14, WDS14, WDSS14
ST34WD34, WDS34, WDSS34
ST38WD38, WDL38, WDS38, WDSS38, WDU38
ST58WD58, WDS58, WDSS58

Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.