The Hillman Group 370828 Hex Head Sleeve Anchor, 3/8 X 3-Inch, 20-Pack

The Hillman Group 370828 Hex Head Sleeve Anchor, 3/8 X 3-Inch, 20-Pack

List Price: $16.99
Price: $14.78
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.
ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-Per Pack

ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-Per Pack

List Price: $10.89
Price: $11.84
Designed for fastening into porous concrete, hollow or grout-filled block and brick. Anchors are contractor grade. Building code approved.
CONFAST 3/8" x 1-7/8" 304 Stainless Steel Hex Sleeve Anchor (50 per box)

CONFAST 3/8" x 1-7/8" 304 Stainless Steel Hex Sleeve Anchor (50 per box)

List Price: $48.99
Price: $48.99
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Head Style The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 3/8".Length Anchor The length of the anchor is 1-7/8"Minimum EmbedmentThe minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 5/8". This will ensure that the minimum embedment of 1-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".Spacing between AnchorsEach anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.
Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)

Red Head HN-1240 Dynabolt Hex Nut 1/2-Inch by 4-Inch Sleeve Anchor (25 per Box)

List Price: $24.25
Price: $24.25
ITW Red Head Sleeve Anchor, Type: Sleeve Anchor, Style: Hex head, Size: 1/2" x 4", Package Quantity: 25 per box
Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"

Sleeve anchors (w/ nuts & washers), Zinc plated steel, Hex head, 5/16" x 2.5"

List Price: $7.99
Price: $7.99
concrete sleeve anchors, use in masonry applications such as concrete, hollow or shallow masonry, or grout-filled blocks.
The Hillman Group 370830 Hex Head Sleeve Anchor, 1/2 X 3-Inch, 12-Pack

The Hillman Group 370830 Hex Head Sleeve Anchor, 1/2 X 3-Inch, 12-Pack

List Price: $15.99
Price: $11.47
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.
The Hillman Group 370823 Hex Head Sleeve Anchor, 1/4 X 1-3/8-Inch, 50-Pack

The Hillman Group 370823 Hex Head Sleeve Anchor, 1/4 X 1-3/8-Inch, 50-Pack

List Price: $18.49
Price: $18.32
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.
ITW 11283 Red Head Sleeve Anchor 1/2 in. x 3 in. Hex, 25-Per Pack

ITW 11283 Red Head Sleeve Anchor 1/2 in. x 3 in. Hex, 25-Per Pack

List Price: $19.99
Price: $18.60
Designed for fastening into porous concrete, hollow or grout-filled block and brick. Anchors are contractor grade. Building code approved.
Red Head HN-3424 Dynabolt Hex Nut 3/4-Inch by 2-1/2-Inch Sleeve Anchor (10 per Box)

Red Head HN-3424 Dynabolt Hex Nut 3/4-Inch by 2-1/2-Inch Sleeve Anchor (10 per Box)

List Price: $25.16
Price: $26.73
'Sleeve Anchor, Carbon Steel, Head Style Hex Nut, Drill Size 3/4 In, Effective Anchor Length 2 1/2 In, Thread Size 5/8-11, Min Embedment 2 1/4 In, Max Work Thickness 1/4 In, Ultimate Tension in 4000 PSI Concrete 8900 Lb, Ultimate Shear in 4000 PSI Concrete 13,100 Lb, Meets/Exceeds GSA Specifications FF-S-325 Group II, Type 3, Class 3, Package 10'
Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)

Red Head HN-1614 Dynabolt Hex Nut 5/16-Inch by 1-1/2-Inch Sleeve Anchor (100 per Box)

List Price: $40.38
Price: $40.38
'Sleeve Anchor, Carbon Steel, Head Style Hex Nut, Drill Size 5/16 In, Effective Anchor Length 1 1/2 In, Thread Size 1/4-20, Min Embedment 1 1/4 In, Max Work Thickness 1/4 In, Ultimate Tension in 4000 PSI Concrete 2600 Lb, Ultimate Shear in 4000 PSI Concrete 2400 Lb, Meets/Exceeds GSA Specifications FF-S-325 Group II, Type 3, Class 3, Package 100'