TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of 5)

TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of 5)

List Price: $6.51
Price: $6.28
The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, includes #8 x 1-1/4" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #8 to #12 size screws with a minimum thread length of 1". The Toggle TA anchor meets Federal Specification FF-B-588-D for Type IV anchors.
Specifications
Ultimate Tensile Strength Values
AnchorDrill DiameterScrew Description1/4" Plywood1/2" Plywood3/8" Drywall1/2" Drywall5/8" Drywall
TA5/16"#8 x 1-1/4"124 lb.Not applicableNot applicableNot applicableNot applicable
TB5/16"#8 x 1-1/2"Not applicable175 lb.97 lb.143 lb.Not applicable
TC5/16"#8 x 1-3/4"Not applicableNot applicableNot applicableNot applicable159 lb.

Ultimate Shear Strength Values
AnchorDrill DiameterScrew Description1/4" Plywood3/8" Drywall1/2" Drywall5/8" Drywall
TA5/16"#8 x 1-1/4"265 lb.Not applicableNot applicableNot applicable
TB5/16"#8 x 1-1/2"Not applicable126 lb.167 lb.Not applicable
TC5/16"#8 x 1-3/4"Not applicableNot applicableNot applicable237 lb.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
What’s in the Box?
  • (5) TOGGLER Toggle TA anchors
  • (5) #8 x 1-1/4" screws
  • (1) Setting key
TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 50)

TOGGLER SNAPTOGGLE BA Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 50)

List Price: $31.25
Price: $21.00
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16"-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
MediaDrill DiameterBolt DescriptionUltimate Tensile Strength ValuesUltimate Shear Strength Values
1/2" Drywall1/2"3/16"-24 UNC zinc-plated steel238 lb.247 lb.
5/8" Drywall1/2"3/16"-24 UNC zinc-plated steel356 lb.298 lb.
1/2" Drywall with 25 Gauge Stud*1/2"3/16"-24 UNC zinc-plated steel412 lb.Not Available
5/8" Drywall with 25 Gauge Stud*1/2"3/16"-24 UNC zinc-plated steel462 lb.Not Available
Concrete Block1/2"3/16"-24 UNC zinc-plated steel802 lb.Not Available

*Failure measured as breakage of drywall portion.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 3/8"-16 UNC Fastener Size (Pack of 25)

TOGGLER SNAPTOGGLE BC Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 3/8"-16 UNC Fastener Size (Pack of 25)

List Price: $28.25
Price: $21.43
The TOGGLER SNAPTOGGLE BC toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/8"-16 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
MediaDrill DiameterBolt DescriptionUltimate Tensile StrengthUltimate Shear Strength
1/2" Drywall3/4"3/8"-16 UNC zinc-plated steel275 lb.292 lb.
5/8" Drywall3/4"3/8"-16 UNC zinc-plated steel576 lb.406 lb.
1/2" Drywall with 25 Gauge Stud*3/4"3/8"-16 UNC zinc-plated steel466 lb.Not available
5/8" Drywall with 25 Gauge Stud*3/4"3/8"-16 UNC zinc-plated steel488 lb.Not available
Concrete Block3/4"3/8"-16 UNC zinc-plated steel1,745 lb.Not available

*Failure measured as breakage of drywall portion.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 1/2"-13 UNC Fastener Size (Pack of 25)

TOGGLER SNAPTOGGLE BD Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 1/2"-13 UNC Fastener Size (Pack of 25)

List Price: $30.00
Price: $29.99
The TOGGLER SNAPTOGGLE BD toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/2"-13 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
MediaDrill DiameterBolt DescriptionUltimate Tensile StrengthUltimate Shear Strength
1/2" Drywall3/4"1/2"-13 UNC zinc-plated steel275 lb.Not available
5/8" Drywall3/4"1/2"-13 UNC zinc-plated steel576 lb.Not available
1/2" Drywall with 25 Gauge Stud*3/4"1/2"-13 UNC zinc-plated steel468 lb.Not available
5/8" Drywall with 25 Gauge Stud*3/4"1/2"-13 UNC zinc-plated steel513 lb.Not available
Concrete Block3/4"1/2"-13 UNC hardened zinc-plated steel2,038 lb. (failure of block)Not available

*Failure measured as breakage of drywall portion.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
TOGGLER Toggle TA Hollow-Door Anchor, Polypropylene, Made in US,1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of 100)

TOGGLER Toggle TA Hollow-Door Anchor, Polypropylene, Made in US,1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of 100)

List Price: $20.75
Price: $20.25
The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before a #8 to #12 size screw with a minimum thread length of 1" can be inserted to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. The Toggle TA anchor meets Federal Specification FF-B-588-D for Type IV anchors.
Specifications
Ultimate Tensile Strength Values
AnchorDrill DiameterScrew Description1/4" Plywood1/2" Plywood3/8" Drywall1/2" Drywall5/8" Drywall
TA5/16"#8 x 1-1/4"124 lb.Not applicableNot applicableNot applicableNot applicable
TB5/16"#8 x 1-1/2"Not applicable175 lb.97 lb.143 lb.Not applicable
TC5/16"#8 x 1-3/4"Not applicableNot applicableNot applicableNot applicable159 lb.

Ultimate Shear Strength Values
AnchorDrill DiameterScrew Description1/4" Plywood3/8" Drywall1/2" Drywall5/8" Drywall
TA5/16"#8 x 1-1/4"265 lb.Not applicableNot applicableNot applicable
TB5/16"#8 x 1-1/2"Not applicable126 lb.167 lb.Not applicable
TC5/16"#8 x 1-3/4"Not applicableNot applicableNot applicable237 lb.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
What’s in the Box?
  • (100) TOGGLER Toggle TA anchors
  • (1) Setting key
TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 5/16"-18 UNC Fastener Size (Pack of 25)

TOGGLER SNAPTOGGLE BE Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 2-1/2" Grip Range, For 5/16"-18 UNC Fastener Size (Pack of 25)

List Price: $28.25
Price: $27.57
The TOGGLER SNAPTOGGLE BE toggle anchor provides a secure hold from within various hollow materials 3/8" to 2-1/2" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 5/16"-18 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 3/4" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
MediaDrill DiameterBolt DescriptionUltimate Tensile StrengthUltimate Shear Strength
1/2" Drywall3/4"5/16"-18 UNC zinc-plated steel270 lb.Not available
5/8" Drywall3/4"5/16"-18 UNC zinc-plated steel480 lb.Not available
1/2" Drywall with 25 Gauge Stud*3/4"5/16"-18 UNC zinc-plated steel439 lb.Not available
5/8" Drywall with 25 Gauge Stud*3/4"5/16"-18 UNC zinc-plated steel477 lb.Not available
Concrete Block3/4"5/16"-18 UNC zinc-plated steel1,400 lb.Not available

*Failure measured as breakage of drywall portion.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
uxcell 5Pcs M4x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment

uxcell 5Pcs M4x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment

List Price: $4.82
Price: $4.82
Toggle Anchor provides a secure hold in hollow-wall, plasterboard, cement board and wood board.
Ideal for attaching brackets, drywall track, lighting, electrical boxes or other light load object.
Q235 Carbon Steel constructed with zinc plated finished, suitable for any acid and alkali environment.
Pre-drilling a proper hole(12mm diameter), harmmer-driven the anchor and screw-in hook to expand and grip the mounting material.
Quick, easy to installed and firm.
5/16" Toggle Wings (Pack of 12)

5/16" Toggle Wings (Pack of 12)

List Price: $4.10
Price: $4.10
5/16" Toggle Wings (Pack of 12)
uxcell 5Pcs M5x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment

uxcell 5Pcs M5x90mm Carbong Steel Toggle Anchor Eye Screw Hook Washer Nut Assortment

List Price: $4.99
Price: $4.99
Toggle Anchor provides a secure hold in hollow-wall, plasterboard, cement board and wood board.
Ideal for attaching brackets, drywall track, lighting, electrical boxes or other light load object.
Q235 Carbon Steel constructed with zinc plated finished, suitable for any acid and alkali environment.
Pre-drilling a proper hole(16mm diameter), harmmer-driven the anchor and screw-in hook to expand and grip the mounting material.
Quick, easy to installed and firm.
TOGGLER SNAPTOGGLE BAS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 100)

TOGGLER SNAPTOGGLE BAS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 100)

List Price: $199.98
Price: $178.99
The TOGGLER SNAPTOGGLE BAS toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16"-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant 304 stainless steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
MediaDrill DiameterBolt DescriptionUltimate Tensile StrengthUltimate Shear Strength
1/2" Drywall1/2"3/16"-24 UNC zinc-plated steel238 lb.247 lb.
5/8" Drywall1/2"3/16"-24 UNC zinc-plated steel356 lb.298 lb.
1/2" Drywall with 25 Gauge Stud*1/2"3/16"-24 UNC zinc-plated steel412 lb.Not available
5/8" Drywall with 25 Gauge Stud*1/2"3/16"-24 UNC zinc-plated steel462 lb.Not available
Concrete Block1/2"3/16"-24 UNC zinc-plated steel802 lb.Not available

*Failure measured as breakage of drywall portion.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.