The Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack

The Hillman Group 829720 1/4 by 20-Inch Stainless Steel Nylon Insert Locknut, 50-Pack

List Price: $9.23
Price: $2.86
Nylon Insert Lock Nuts are also known as stop nuts. Lock nuts are used for fastening to a bolt when mechanically joining materials together. The bolt threads into the nylon material are located at the top of the nut. The purpose of the nylon insert is to prevent backing off or loosening from vibration.
304 Stainless Steel Lock Nut Assortment 170 Pcs, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut

304 Stainless Steel Lock Nut Assortment 170 Pcs, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut

List Price: $13.99
Price: $13.99
This Lock Nut assortment kit totals to 170 pieces and is composed of 45 pieces of M3, 35 pieces of M4, 30 pieces of M5, 30 pieces of M6, 15 pieces of M8, 10 pieces of M10, and 5 pieces of M12. More pieces are allocated on lock nuts that are commonly used. These lock nuts are provisioned with nylon collars thus, eliminating the need for lock washers. These nylon collars of these nuts are made from an industrial-strength material has an increased grip, as a result, it's likely to last much longer and be more difficult to undo. It also performs better compared to lock washers as it is made out of non-corrosive material therefore reduces its proneness to leaking. While the lock nuts themselves are made rigidly solid polymer making them highly resistant against turning, and they are more tightly adherent to each other which means that any exposure to vibration will not result in unlocking. Guaranteed to stay intact and in firm hold making them virtually indestructible. Unlike other plastic container that comes with the kit, the kit comes with a transparent plastic compartment made from high quality polyurethane for a long-standing and enduring service in order to support the combined weight of the lock nuts and usual wear and tear This plastic container comes with a pre-installed border to keep the lock nuts neatly organized and well-kept. Altogether, this assortment kit makes it ideal for use of professionals and DIYers, alike with more quantity and better overall quality this is certainly and undoubtedly the better cost-effective choice.
Lock Nut 1/4"-20 Inch (100 Pieces) Stainless Steel Finish Hex, By Bolt Dropper, 304 18-8 Stainless With Nylon Insert.

Lock Nut 1/4"-20 Inch (100 Pieces) Stainless Steel Finish Hex, By Bolt Dropper, 304 18-8 Stainless With Nylon Insert.

List Price: $10.99
Price: $10.99
Bolt Dropper Hex Lock Nuts are perfect for use near salt water, fresh water and other related projects.  TOP QUALITY HEX LOCK NUTS:
  • Rated for both indoor and outdoor use
  • Superior corrosion resistance to regular steel, made with 100% Stainless Steel.
  VALUE:
Get the most out of your purchase! We offer different size packages so you won't have to worry about running out of Hex Lock Nuts in the middle of your project. Bolt Dropper Hex Lock Nuts are more corrosion resistant and stronger than other Hex Lock Nuts and we stand by our claim 100%.   SPECIFICATIONS:
  • Diameter: 1/4" Inch Inside Diameter
  • Thread Size: 20 Threads per Inch (Standard Thread Size/Coarse Thread)
  • Quantity: 100 Pack
  • Material: 18-8 (304) Stainless Steel
 
WARRANTY:

Bolt Dropper Hex Lock Nuts come with a 100% Satisfaction Guarantee, if you have any problems we will replace them free of charge!
Hilitchi 175-Piece Stainless Steel Nylon Lock Nut Assortment Kit, Size Include: M3 M4 M5 M6 M8 M10 M12 (Lock Nuts)

Hilitchi 175-Piece Stainless Steel Nylon Lock Nut Assortment Kit, Size Include: M3 M4 M5 M6 M8 M10 M12 (Lock Nuts)

List Price: $13.98
Price: $13.98
High-quality 304 stainless steel nylon lock nuts

Material: 304 Stainless Steel, Nylon

Package quantity: 175-Piece

Package Includes:
M3..................................55-Piece
M4 .................................35-Piece
M5..................................30-Piece
M6..................................25-Piece
M8..................................15-Piece
M10................................10-Piece
M12.................................5-Piece
Total: 175-Piece

Comes with a Plastic Organizer Box for Storage

Seven common sizes for general purpose use, nylon insert grips bolt threads to prevent loosening.
3/8-16 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50

3/8-16 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 50

List Price: $9.95
Price: $9.70
A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 °F (121 °C). Authorities disagree on whether nyloc nuts should be reused. For example, Carroll Smith (Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook) notes that the nylon insert is not damaged by installation and therefore they can be reused many times ,and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification. However, an Air Force Technical Order requires replacement of self-locking nuts in critical areas.
TecUnite 100 Pieces M4/M5/M6/M8/M10 Zinc Alloy Furniture Hex Socket Screw Inserts Threaded Insert Nuts Assortment Tool Kit for Wood Furniture

TecUnite 100 Pieces M4/M5/M6/M8/M10 Zinc Alloy Furniture Hex Socket Screw Inserts Threaded Insert Nuts Assortment Tool Kit for Wood Furniture

List Price: $14.99
Price: $10.99
Threaded insert nuts set: This insert nuts assortment kit contains 6 different types nuts which are separated and stored in a neat case, you can find the appropriate size quickly. Features of insert nut: These threaded inserts are inserted into a pre-drilled hole by screwing in, in that case the external protrusions bite into the wood, preventing the nut from either turning or pulling out. Suitable application: Easy to install and with good stability, have a good effect in the furniture combination, suit for soft woods of pine, plywood, fiberboard, etc.. Specification: Material: zinc alloy Size: M4*10, M5*10, M6*10, M6*15, M8*20, M10*25 Quantity: 100 pieces in total Package contents: 30 x Hex socket (M4*10) 30 x Hex socket (M5*10) 15 x Hex socket (M6*10) 15 x Hex socket (M6*15) 5 x Hex socket (M8*20) 5 x Hex socket (M10*25) Warm note:
100Pcs M3 x 0.5mm 304 Stainless Steel Self-Lock Nylon Inserted Hex Lock Nuts, Self Clinching Nuts

100Pcs M3 x 0.5mm 304 Stainless Steel Self-Lock Nylon Inserted Hex Lock Nuts, Self Clinching Nuts

List Price: $7.94
Price: $7.94
Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft Washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose.
Bolt thread on the nuts embedded in the nylon extrusion, making the nylon deformation, after installation, the nylon and thread completely squeeze contact, the extruded nylon to the bolt A lot of resilience, increased friction, so that the bolt is not easy to loose.
binifiMux 40pcs M4 x 0.7mm 304 Stainless Steel Nylon Lock Nuts Inserted Hex

binifiMux 40pcs M4 x 0.7mm 304 Stainless Steel Nylon Lock Nuts Inserted Hex

List Price: $5.96
Price: $5.96
Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft Washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose.
Bolt thread on the nuts embedded in the nylon extrusion, making the nylon deformation, after installation, the nylon and thread completely squeeze contact, the extruded nylon to the bolt A lot of resilience, increased friction, so that the bolt is not easy to loose.
Glarks 175pcs Metric 304 Stainless Steel Nylon Lock Nut Assortment Kit - M3 M4 M5 M6 M8 M10 M12

Glarks 175pcs Metric 304 Stainless Steel Nylon Lock Nut Assortment Kit - M3 M4 M5 M6 M8 M10 M12

List Price: $13.92
Price: $13.92
Product Type: Nylon lock nut

Material: High quality 304 stainless steel, strong and durable

Feature: With captive undersized nylon washer that creates friction with the mating threads to prevent loosening, makes it better locking ability

Application: Automobile, construction machinery, shipbuilding

Packaging Included:
M3 ----------------------------- 45pcs
M4 ----------------------------- 35pcs
M5 ----------------------------- 30pcs
M6 ----------------------------- 35pcs
M8 ----------------------------- 15pcs
M10 --------------------------- 10pcs
M12 ---------------------------- 5pcs
Total: 175pcs
Traxxas 1747 Nylon Locknuts, 4mm (Set of 10)

Traxxas 1747 Nylon Locknuts, 4mm (Set of 10)

Price: $0.99
Nuts, 4mm nylon locking (10) Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.