uxcell 1mm Thin Plates M2 Zinc Plated Self Clinching Rivet Nut 100pcs

uxcell 1mm Thin Plates M2 Zinc Plated Self Clinching Rivet Nut 100pcs

List Price: $5.53
Price: $4.99
The back of the plate to maintain a complete block;Small and exquisite, suitable for all electronic or precision equipment;High resistance to torque;The equipment is convenient, simply press riveting;The series of specifications, can meet a variety of design requirements.
Height(Not Include Guiding Slot and Embossing Teeth):1.5mm/0.06inch.
Guiding Slot Outer Diameter:4mm/0.16inch.
Embossing Teeth and Guiding Slot Total Height:1mm/0.04inch.
Total Height:2.5mm/0.1inch.
Maximum Outer Diameter:6mm/0.24inch.
Pem Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Metric, CLSS-M5-2

Pem Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Metric, CLSS-M5-2

List Price: $28.50
Price: $28.50
Type S, SS, CLS, and CLSS nuts provide load-bearing threads in thin sheets with high pushout and torque-out resistance. Type SP, PEM 300 nuts provide strong load-bearing threads in stainless steel sheets as thin as .030". Types S / SS are recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 80 or less and HB (Hardness Brinell) 150 or less. Type SP is recommended for use in stainless steel sheets HRB (Rockwell "B" scale) 90 or less and HB (Hardness Brinell) 185 or less.
Pem Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Unified, CLS-832-2

Pem Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Unified, CLS-832-2

List Price: $30.00
Price: $30.00
Type S, SS, CLS, and CLSS nuts provide load-bearing threads in thin sheets with high pushout and torque-out resistance. Type SP, PEM 300 nuts provide strong load-bearing threads in stainless steel sheets as thin as .030". Types S / SS are recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 80 or less and HB (Hardness Brinell) 150 or less. Type SP is recommended for use in stainless steel sheets HRB (Rockwell "B" scale) 90 or less and HB (Hardness Brinell) 185 or less.
Pem Floating Self-Clinching Fasteners - Type A4/AS/AC - Metric, AC-M5-1

Pem Floating Self-Clinching Fasteners - Type A4/AS/AC - Metric, AC-M5-1

List Price: $29.25
Price: $29.25
Locking and Non-locking Threads These fasteners provide load-bearing threads in thin sheets and permit up to 0.76mm adjustment for mating hole misalignment. The self-clinching feature offers fast and simple assembly. The fasteners are squeezed into prepared holes using any standard press. The sheet remains flush on one side, and the fastener is permanently locked in place. Extra strength and support in assembly is obtained by the threads of the floating nut extending fully into the retainer shank (a unique PEM feature). A self-locking version of the fastener is also offered. Thread locking torque performance is equivalent to applicable NASM25027 specifications. Non-locking Type A4 and self-locking Type LA4 fasteners provide load-bearing threads in stainless steel sheets as thin as 0.97mm with hardness up to HRB 88 on the Rockwell "B" scale. Many PEM Type AS and AC self-clinching floating fasteners correspond to sizes in US NASM45938/11 specifications. Check our web site for a complete Military Specification and National Aerospace Standards Reference Guide (Bulletin NASM).
RackGold Black 12-24 Cage Nuts 100 Pack - USA Made & Lifetime Warranty

RackGold Black 12-24 Cage Nuts 100 Pack - USA Made & Lifetime Warranty

List Price: $38.95
Price: $29.94
The RackGold Cage nuts snap into square hole rack rails, giving you various threading options such as 10-32, 12-24, M5 or M6. Dell servers typically use 10-32 style threading, HP most often use M6 threads. Most telco 2-post relay racks use 12-24 threads. The nut is housed within a 3/8 inch spring metal body (Panel 064 - 105) When each side tab on the body is compressed, the nut can be inserted into the square hole in the rack rail. Most often used for mounting of servers, rack shelves, switches, routers, and other networking, electronic and data equipment. Mfr # G1224-SNP-B10
Pemsert Self-Clinching Flush Fasteners, Type F - Metric, F-M6-4

Pemsert Self-Clinching Flush Fasteners, Type F - Metric, F-M6-4

List Price: $25.85
Price: $25.85
PEMSERT self-clinching flush nuts are designed to be completely flush in sheets as thin as 1.5mm. These fasteners are ideal for applications where a thin sheet requires load-bearing threads but still must remain smooth, with no protrusions on either surface. The PEM flush nut can be installed easily by squeezing it into a round hole in metal sheets. When the fastener is installed, both the top and the bottom of the sheet remain smooth, enhancing the functional and cosmetic qualities of the entire assembly. PEMSERT self-clinching flush nuts can be installed in metal sheets before bending and forming. This can provide strong threads in places which would be inaccessible for installation after chassis are formed. The hexagonal head along with the proven PEM self-clinching design ensures high axial and torsional strength and PEMSERT Type F fasteners can be ordered to conform to US NASM45938/4 specifications.
Pem Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Unified, S-832-1ZI

Pem Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Unified, S-832-1ZI

List Price: $29.00
Price: $25.65
Type S, SS, CLS, and CLSS nuts provide load-bearing threads in thin sheets with high pushout and torque-out resistance. Type SP, PEM 300 nuts provide strong load-bearing threads in stainless steel sheets as thin as .030". Types S / SS are recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 80 or less and HB (Hardness Brinell) 150 or less. Type SP is recommended for use in stainless steel sheets HRB (Rockwell "B" scale) 90 or less and HB (Hardness Brinell) 185 or less.
Pem Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Metric, S-M6-1ZI

Pem Self-Clinching Nuts - Types S, SS, CLS, CLSS, SP - Metric, S-M6-1ZI

List Price: $26.00
Price: $26.00
Type S, SS, CLS, and CLSS nuts provide load-bearing threads in thin sheets with high pushout and torque-out resistance. Type SP, PEM 300 nuts provide strong load-bearing threads in stainless steel sheets as thin as .030". Types S / SS are recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 80 or less and HB (Hardness Brinell) 150 or less. Type SP is recommended for use in stainless steel sheets HRB (Rockwell "B" scale) 90 or less and HB (Hardness Brinell) 185 or less.
Pem Self-Clinching Threaded Studs - Types FH/FHS/FHA - Metric, FH-M6-25ZI

Pem Self-Clinching Threaded Studs - Types FH/FHS/FHA - Metric, FH-M6-25ZI

List Price: $30.00
Price: $30.00
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. FH (flush-head) studs are available in aluminum, steel, or stainless steel. They are also available unthreaded on special order. - Flush-head for sheet thickness of .040" and greater. - Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 80 or less and HB (Hardness Brinell) 150 or less. - Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 70 or less and HB (Hardness Brinell) 125 or less. - Type FHA is recommended for use in aluminum sheets HRB (Rockwell "B" scale) 50 or less and HB (Hardness Brinell) 82 or less.