Hilitchi 410 Stainless Steel #8 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit Set with Drill Point, Self Driller, 200 pieces

Hilitchi 410 Stainless Steel #8 Hex Washer Head Self Drilling Sheet Metal Tek Screws Assortment Kit Set with Drill Point, Self Driller, 200 pieces

List Price: $26.99
Price: $15.62
【Hex Wafer Head】Self Drilling Screws: https://www.amazon.com/dp/B01J3M1KX6
【#8 Flat Head】Self Drilling Screws: https://www.amazon.com/dp/B07352HHB8
【#8 Wafer Head】Phillips Self Drilling Screws: https://www.amazon.com/dp/B073531BV6
【#8 Pan Head】Phillips Self Drilling Screws: https://www.amazon.com/dp/B0734YL7HT

Hilitchi 200 Pcs High Quality 410 Stainless Steel Self Drilling Screws Assortment Kit
【Specifications】
● Screw Type: Hex Washer Head
● Material: 410 Stainless Steel
● Color: Silver tone
● Package Quantity: 200-Piece
● The Package Contains 6 Sizes
● Size Included: #8 x 1/2'', #8 x 1/2'', #8 x 5/8'', #8 x 3/4'', #8 x 1'', #8 x 1-1/4'', #8 x 1-1/2''

【Features】
● 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments
● It is wood drill tail screw, mainly used in steel structure caigang watt fixed can also be used for fixing the simple construction of the sheet material.
● Teks self-tapping screws provide secure fastening with strong holding power without the need to pre-drill.

【Package Included】
- #8 x 1/2'' - 40pcs
- #8 x 5/8'' - 40pcs
- #8 x 3/4'' - 35pcs
- #8 x 1'' - 35pcs
- #8 x 1-1/4'' - 20pcs
- #8 x 1-1/2'' - 20pcs
【Package Quantity】200pcs
This set is organized by size in a transparent storage case for quick access and protection.

Hilitchi 200-Pcs 304 Stainless Steel Phillips Truss Head Self Tapping Sheet Metal Screws Assortment Kit Set, Thread Size #6#8#10#12, Length 3/4'' to 1-1/2''

Hilitchi 200-Pcs 304 Stainless Steel Phillips Truss Head Self Tapping Sheet Metal Screws Assortment Kit Set, Thread Size #6#8#10#12, Length 3/4'' to 1-1/2''

List Price: $15.56
Price: $15.56
●●●Hilitchi 200pcs High Quality Phillips Truss Head Sheet Metal Screws Assortment Kit

【Specifications】
- Drive Type: Phillips Drive;
- Head Style: Truss Head;
- Material: 304 Stainless Steel;
- Main Color: Silver Tone;
- Length Included: #6, #8, #10, #12;

【Features】
- Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material.
- These screws commonly have a sharp point that helps penetrate the material.
- The truss head has an extra-wide low-profile domed shape for applications with minimal clearance.
- Made of 304 Stainless Steel, the stainless steel material provides strength and offers good corrosion resistance in many environments.
- This Set is organized by size / type in a transparent storage case for quick access and protection.

【Package Included】
- #6 x 3/4'' (M3 x 20mm) - 30pcs
- #6 x 1'' (M3 x 25mm) - 30pcs
- #6 x 1-1/2'' (M3 x 40mm) - 30pcs
- #8 x 3/4'' (M4 x 20mm) - 20pcs
- #8 x 1'' (M4 x 25mm) - 20pcs
- #8 x 1-1/2'' (M4 x 40mm) - 20pcs
- #10 x 1'' (M5 x 25mm) - 15pcs
- #10 x 1-1/2'' (M5 x 40mm) - 15pcs
- #12 x 1'' (M6 x 25mm) - 10pcs
- #12 x 1-1/2'' (M6 x 40mm) - 10pcs
【Package Quantity: 200pcs】
This set is organized by size in a transparent storage case for quick access and protection.

Hilitchi is a professional company of fasteners. We sell steel, stainless steel and brass screws, self tapping screws,
self drilling screws, dry wall screws, hex nuts, hex bolts, rivets, anchors, nails, flat washers, spring washers, couplings and fixings.
410 Stainless #8 x 1/2" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , (1/2" to 1-5/8" Length in Listing), 100 pieces, Modified Truss Head Self Driller (#8 x 1/2 inch)

410 Stainless #8 x 1/2" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , (1/2" to 1-5/8" Length in Listing), 100 pieces, Modified Truss Head Self Driller (#8 x 1/2 inch)

List Price: $12.99
Price: $12.99
Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These stainless teks are great to use in environments that are damp.
Stainless #10 X 3/4" Tek Screw (100 pcs)) Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces

Stainless #10 X 3/4" Tek Screw (100 pcs)) Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces

List Price: $13.99
Price: $13.99
Self-Drilling Screws, also known as Tek screws, eliminate the need for a pre-drilled hole. The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. These #10 x 3/4" stainless teks are great to use in environments that are damp. These work great on gutters.
#10 x 1" Pan Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces

#10 x 1" Pan Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces

List Price: $10.95
Price: $10.95
SHEET METAL SCREWS HAVE SHARP THREADS THAT CUT INTO MATERIALS SUCH AS:
  • Plastic
  • Plexi glass
  • Wood
  • And of course sheet metal
Sheet metal screws are also the go to fasteners for use with plastic wall anchors in drywall. Tapping screws are considered externally threaded fasteners that "tap" their own mating threads in metallic and non-metallic (such as plastic) materials. Tapping screws, especially Type A, are referred to as "sheet metal screws" because one of their first applications was in ventilation ducts made of sheet metal. They also make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood. Pan heads are slightly rounded with short vertical sides. A Pan head provides a low large diameter head, but with characteristically high outer edge along the outer periphery of the head where driving action is most effective for high tightening torques. Phillips drive is x-shaped for installation with a phillip screw driver. The design is often criticized for its tendency to cam out at lower torque levels than other "cross head" designs. There has long been a popular belief that this was actually a deliberate feature of the design, for the purpose of assembling aluminum aircraft without over tightening the fasteners.
18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4" Length (Pack of 100)

18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Truss Head, Phillips Drive, Type A, #8-15 Thread Size, 3/4" Length (Pack of 100)

List Price: $2.61
Price: $2.61
The plain finish 18-8 stainless steel sheet metal screw with truss head and Phillip drive has a Type A point for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood. The Type A point has a conical tip and spaced threads. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic. The truss head has an extra-wide low-profile domed shape for applications with minimal clearance. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
Stainless Steel Sheet Metal Screw, Plain Finish, Hex Head, External Hex Drive, Self-Drilling Point, 1/2" Length, 8-18 Threads (Pack of 100)

Stainless Steel Sheet Metal Screw, Plain Finish, Hex Head, External Hex Drive, Self-Drilling Point, 1/2" Length, 8-18 Threads (Pack of 100)

List Price: $9.65
Price: $9.65
Sheet metal screws have a pointed end and widely spaced threads. They're self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. Self-Drilling Points are excellent for use with sheet metal.
Metal ROOFING SCREWS: (250) Screws x 2" ZINC Hex Washer Head Sheet Metal Roof Screw. Self starting/self tapping metal to wood, sheet metal roofing siding screws ~ EPDM washer. Metal Roof screw with colored head ~For corrugated roofing

Metal ROOFING SCREWS: (250) Screws x 2" ZINC Hex Washer Head Sheet Metal Roof Screw. Self starting/self tapping metal to wood, sheet metal roofing siding screws ~ EPDM washer. Metal Roof screw with colored head ~For corrugated roofing

List Price: $20.00
Price: $20.00
ZINC x 2" Long Sheet Metal Roofing Screws with hex washer head. These self starting roofing screws help take the headache out of sheet metal roof and siding installation. The color on the roof screw heads is Zinc Gray and is a zinc coating to help weather the storms through the years. The EPDM washer seal will keep the weather out through the years. These metal-to-wood screws are great sheet metal roofing screws to use on any metal roofing or siding project where 2" roofing screws are needed: Installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn, lean-to, and much more!

**Roofing Screw COLOR MATCH : Zinc is Gray and will go well with lots of different gray colored or galvanized or other colors of roofing sheet metal depending on the application and personal preference. Generally buying zinc coated screws is a result of wanting a long lasting but low cost roofing screw!"