GRK RSS388HP RSS HandyPak 3/8 by 8-Inch Structural Screws, 50 Screws per Package

GRK RSS388HP RSS HandyPak 3/8 by 8-Inch Structural Screws, 50 Screws per Package

List Price: $102.05
Price: $95.12
Included with (50) GRK Fasteners 12287 3/8" x 8" T-40 RSS Rugged Structural Screws. The RSS Fasteners are Ideal for Carrying Beam, Playground Equipment, Ledger Board, Deck Posts, and Stair Rails. AC257 Treated Lumber Approved (IBC/IRC Code Compliant ESR #2442). Made with a Climak All-Weather Cloating, No Pre-Drilling, Low Torque, and Recessed Star Drive.
GRK RSS3810HP RSS HandyPak 3/8 by 10-Inch Structural Screws, 50 Screws per Package

GRK RSS3810HP RSS HandyPak 3/8 by 10-Inch Structural Screws, 50 Screws per Package

List Price: $153.92
Price: $138.09
Included with (50) GRK Fasteners 12293 3/8" x 10" T-40 RSS Rugged Structural Screws. The RSS Fasteners are Ideal for Carrying Beam, Playground Equipment, Ledger Board, Deck Posts, and Stair Rails. AC257 Treated Lumber Approved (IBC/IRC Code Compliant ESR #2442). Made with a Climak All-Weather Cloating, No Pre-Drilling, Low Torque, and Recessed Star Drive.
GRK RSS10318-5 RSS ProPak 10 by 3-1/8-Inch Structural Screws, 236 Screws per Pail

GRK RSS10318-5 RSS ProPak 10 by 3-1/8-Inch Structural Screws, 236 Screws per Pail

List Price: $49.99
Price: $48.74
GRK's RSS Rugged Structural Screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.

RSS screws which are 3"1/8 and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw's drawing strength. The CEE thread also reduces the likelihood of splitting the wood and the friction on the screw shank which can result in lowering the driving torque.

Our round head with built-in shield (washer type head) has no sharp edges such as on conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. Short lengths of the RSS may also be used to install wire diamond mesh for stucco buildings.

The #30 Star Drive will deliver approximately 650 lbf of energy, eliminating the need to drill a pilot hole.

The RSS screw is the only lag screw replacement of its kind.
Simpson Strong Tie N8DHDG-R 8D by 1-1/2 Hot-Dip Galvanized Nails (1-lb)

Simpson Strong Tie N8DHDG-R 8D by 1-1/2 Hot-Dip Galvanized Nails (1-lb)

List Price: $3.49
Price: $4.74
The Strong-Drive structural fasteners are engineered and extensively tested to efficiently meet your most demanding wood and metal applications.
Simpson Strong Tie N8D5HDG-R 8D by 1-1/2 Hot-Dip Galvanized Nails (735 Piece)

Simpson Strong Tie N8D5HDG-R 8D by 1-1/2 Hot-Dip Galvanized Nails (735 Piece)

List Price: $30.57
Price: $26.42
The Strong-Drive structural fasteners are engineered and extensively tested to efficiently meet your most demanding wood and metal applications.
Simpson Strong Tie 10D5HDG Structural Connector 3-Inch by .148-Inch 9-Gauge Smooth Shank Hot-Dip Galvanized Nails

Simpson Strong Tie 10D5HDG Structural Connector 3-Inch by .148-Inch 9-Gauge Smooth Shank Hot-Dip Galvanized Nails

List Price: $24.26
Price: $16.99
These Simpson Structural Connectors are coated fasteners with a medium level of corrosion protection, making them suitable for use in some exterior and corrosive environments and with some preservative-treated woods. For higher corrosion exposure, use stainless steel fasteners.
Simpson Strong Tie N10D5HDG Structural Connector 1-1/2-Inch by .148-Inch 9-Gauge Smooth Shank Hot-Dip Galvanized Nails

Simpson Strong Tie N10D5HDG Structural Connector 1-1/2-Inch by .148-Inch 9-Gauge Smooth Shank Hot-Dip Galvanized Nails

List Price: $21.99
Price: $19.26
These Simpson Structural Connectors are coated fasteners with a medium level of corrosion protection, making them suitable for use in some exterior and corrosive environments and with some preservative-treated woods. For higher corrosion exposure, use stainless steel fasteners.
Simpson Strong Tie SD8X1.25-R #8 by 1.25 Drive Screw (100 Piece)

Simpson Strong Tie SD8X1.25-R #8 by 1.25 Drive Screw (100 Piece)

List Price: $7.49
Price: $8.47
The wafer-head screw is great for general wood-to-wood fastening where a low-profile head is needed.
GRK RSS5164BP RSS BlisterPack 5/16X4-Inch Structural Screws, 1 Bit and 12 Screws per Card

GRK RSS5164BP RSS BlisterPack 5/16X4-Inch Structural Screws, 1 Bit and 12 Screws per Card

List Price: $9.50
Price: $9.50
GRK's RSS Rugged Structural Screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.

RSS screws which are 3"1/8 and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw's drawing strength. The CEE thread also reduces the likelihood of splitting the wood and the friction on the screw shank which can result in lowering the driving torque.

Our round head with built-in shield (washer type head) has no sharp edges such as on conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. Short lengths of the RSS may also be used to install wire diamond mesh for stucco buildings.

The #30 Star Drive will deliver approximately 650 lbf of energy, eliminating the need to drill a pilot hole.

The RSS screw is the only lag screw replacement of its kind.
Uxcell a15123100ux0344 M3 x 40mm Phillips Head Stainless Steel Countersunk Bolts Screws

Uxcell a15123100ux0344 M3 x 40mm Phillips Head Stainless Steel Countersunk Bolts Screws

List Price: $14.36
Price: $14.36
1. 304 stainless steel material countersunk Phillips socket flat head screws M3 x 40mm. Total length: 40mm/1. 6"(L); head diameter): 5mm/0. 2"; head height(k): 2mm/0. 08";thread diameter): M3/3mm; Phillips size: 3mm/0. 12".