Drain Cleaner and Cleaning Tool by Green-world - Set of 3 Hair Drain Clog Remover and Removal Opener Sink and Bathtub, Toilet - Hook Catcher Unclogger and Auger Plumbing - Zip It

Drain Cleaner and Cleaning Tool by Green-world - Set of 3 Hair Drain Clog Remover and Removal Opener Sink and Bathtub, Toilet - Hook Catcher Unclogger and Auger Plumbing - Zip It

List Price: $7.99
Price: $5.98
Save your money you will no longer need expensive professional plumber services with this simple.
Damaged Screw Extractor and Remove Set by Aisxle,Easily Remove Stripped or Damaged Screws. Made From H.S.S. 4341#, the Hardness Is 62-63hrc,Set of 4 Stripped Screw Removers

Damaged Screw Extractor and Remove Set by Aisxle,Easily Remove Stripped or Damaged Screws. Made From H.S.S. 4341#, the Hardness Is 62-63hrc,Set of 4 Stripped Screw Removers

List Price: $39.99
Price: $9.99

Damaged Screw Remover and Extractor Set by Aisxle

The #1 Damaged Screw Remover and ONLY Set Sold With a Lifetime Guarantee!

Find out why our 4 piece remover and extractor was voted #1 "Best Consumer Buy" and how you're protected by our triple guarantee. 1Serrated extracting end of tool bites into damaged screw head. You can now easily remove the most stubborn hard to remove screws. Great for stripped, broken, stuck or damaged and screw removal. Made from hardened tool steel and tempered twice for extra hardness and a lifetime of use. The 2 in 1 drill bit and extractor in one tool extracts fasteners fast; Compatible with quick chuck systems or chuck directly into drill. Note: these bits are not for commercial screw removal.

We Offer An Iron-Clad 3 Tier 100% Money Back Guarantee:

1. If you're not 100% happy with it, ship it back and we will refund your money. 2. If the drill bit breaks or is damaged, ship it back and we will replace it for FREE. 3. If you ever lose the product, just let us know and we will ship you out another one....for free! Here is the bottom line....If you want to high quality, damaged screw removal set then there is absolutely no risk for you to purchase our set.

Buy Now with confidence knowing that 1000's of others have been completely satisfied with their results because of our 100% money back 3 tier customer satisfaction guarantee.
Damaged Screw Extractor Set - Remover Set by Aisxle - Easily Remove Stripped or Damaged Screws - Set of 4 Stripped Screw Removers

Damaged Screw Extractor Set - Remover Set by Aisxle - Easily Remove Stripped or Damaged Screws - Set of 4 Stripped Screw Removers

List Price: $39.99
Price: $9.99
Damaged Screw Remover and Extractor Set by Aisxle

1Serrated extracting end of tool bites into damaged screw head. You can now easily remove the most stubborn hard to remove screws. Great for stripped, broken, stuck or damaged and screw removal. Made from hardened tool steel and tempered twice for extra hardness and a lifetime of use. The 2 in 1 drill bit and extractor in one tool extracts fasteners fast; Compatible with quick chuck systems or chuck directly into drill. Note: these bits are not for commercial screw removal.

1# Remove Diameter 3~5mm

2# Remove Diameter 4~8mm

3# Remove Diameter 5~10mm

4# Remove Diameter 6~12mm

Package Included:

1 x Set of 4 Aisxle Damaged Screw Remover

Warranty
All Aisxle items are backed by a Limited Lifetime warranty. Please contact us via email if you have any questions.
With this damaged screw and bolt extractor. you can easily remove any stripped screw in a while. You'll never again be slowed down or frustrated by a stripped screw or broken bolt. If you can use a drill, you can use the screw extractor. In fact, it can even remove four-inch long, stubborn deck screws out of redwood. Even if you break off the entire head of a screw or bolt, you can still extract it right out. No problem. Made with durable, hardened steel and is reusable! Great for: contractors, carpenters, handymen, and do-it-yourselfers. It's great for anyone! Works with any screw or bolt of any size! It is so simple; anyone can use it! Package include: 4 X Damaged Screw Remover
Meterk Damaged Screw Extractor and Remove Set, Extractor Set Made From H.S.S. 4341#, HRC62-63 Hardness Broken Screw Bolts Extractors Easy Stripped, Set of 4 Stripped Screw Removers

Meterk Damaged Screw Extractor and Remove Set, Extractor Set Made From H.S.S. 4341#, HRC62-63 Hardness Broken Screw Bolts Extractors Easy Stripped, Set of 4 Stripped Screw Removers

List Price: $16.99
Price: $9.97
If you are doing woodworking and sometimes have a problem with the broken bolt or screw, this set of extractor might be a lifesaver.They help to remove a damaged screws perfectly. Suitable for working with most drills, screws and bolts. Features: Remove Damaged Screws Efficiently - Remove stripped or damaged screws and bolts quickly and easily. An Essential Tool of the Tool Kit Box - Easy to use with just easy 2 steps, save your time. Includes 4 Different Sizes - (1#, 2#, 3#, 4#) in one screw remover set for most drill, screw or bolt. Fit for Damaged Screws & Bolts - Remove damaged screws and bolts in solid wood surface. High Quality Material - Made from high hardness HSS 4341#, the hardness is HRC62-63. NOTE: These damaged screws extractors are not suitable for commercial screw removal. Specifications: Brand Name: Meterk Color: Silver Material: High Speed Steel (HSS 4341) Surface Treatment: Overall Sandblasting Standard: 1#, 2#, 3#, 4# Hardness: HRC62-63 Removing Diameter: 1# 3-5mm, 2# 4-8mm, 3# 5-10mm, 4# 6-12mm Height: 51mm / 2" Size: #1: Screws No.4-No.7 Bolts NO.10(5mm), Diameter: 6.35mm/0.25" #2: Screws No.8-No.10 Bolts 1/4-in.(6mm), Diameter: 6.35mm/0.25" #3: Screws No.11-No.14 Bolts 5/16-in.(8mm), Diameter: 6.50mm/0.26" #3: Screws No.16-No.24 Bolts 3/18-in.(10mm), Diameter: 8.90mm/0.35" Package Size: 8.7 * 6.2 * 1.7cm / 3.43 * 2.44 * 0.67in Package Weight: 74g / 2.61oz Package List: 4 * Damaged Screws Extractor 1 * Tool Box
Tacklife Damaged Screw Extractor Set, 4pcs Stripped Screw Remover with Case, Made of High-Speed Steel 6542#, Hardness 63-65HRC, SEB04A

Tacklife Damaged Screw Extractor Set, 4pcs Stripped Screw Remover with Case, Made of High-Speed Steel 6542#, Hardness 63-65HRC, SEB04A

List Price: $14.99
Price: $6.99
Tacklife Damaged Screw Extractor SetScrew extractors set is a must tool while projects with rusted bolts and screw heads, snapped off bolts and a host of other issues;Our stripped screw extractor kit itself comes with four different size bits so it can be used on any screw types/size. ldeal for carpenters,repairmen, contractors, handymen, or do-it-yourselfers.High-Speed Steel 6542#➤Hardness reaches to 63-65HRC, higher than most of the damaged screw extractors in the market➤Made of durable hardened steel and tempered twice for extra hardness, promising you a long lasting screw extractor tool of rugged material and outstanding performance; Simple to UseDrill a hole in the designated screw, and then unscrew with the extractor at another side for virtually effortless removal. Wide range of screwsor bolts size can be covered as follows:★1 # Remove diameter 3 ~ 5mm★2 # Remove Diameter 4 ~ 8mm★3 # Remove diameter 5 ~ 10mm★4 # Remove diameter 6 ~ 12mm100% Money Back Guarantee➤If you are not satisfied with it, ship it back and we will refund for you➤If the drill bit breaks or is damaged, ship it back and we will replace it for free➤If you ever lose one of them accidentally, just let us know and we will ship you out another one for freeNote 1. These bits are not intended for commercial removal of screws.2. Place the device in a dry place so that it does not rust.3. Don't use the impact hammer gear!4. Adjust to the slowest speed, less than 200RPM will be enough.
Superior Tool 05255 1.5" Tub Drain Extractor-Removes One and a Half Inch Old or Stubborn Tub Drains

Superior Tool 05255 1.5" Tub Drain Extractor-Removes One and a Half Inch Old or Stubborn Tub Drains

List Price: $17.49
Price: $17.14
Superior Tool's 05255 Tub Drain Extractor Removal Tool 1.5" removes stubborn 1.5" drains with ½" ratchet drive and extension or wrench. The unique helical knurl bites into the drain and will not slip. The more torque you use, the more bite you'll get. Hardened steel design with gold plate finish.
Nut & Bolt Thread Checker (Inch & Metric)

Nut & Bolt Thread Checker (Inch & Metric)

List Price: $30.37
Price: $29.99
The Inch & Metric Thread Checker is an accurate and easy-to-use thread identifier for both nuts and bolts. Each individual gauge features a male threaded stud on one end and a female threaded hole on the other. The Thread Checker is especially well suited for distinguishing between similar inch and metric threads. Conveniently assembled onto a wire loop, it's the perfect portable solution! Hang it on your shop wall or store it in your tool box for safe keeping. SIZE SPECIFICATIONS: INCH (14): 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20 METRIC (12): M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75
ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads

ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads

List Price: $39.99
Price: $39.99
Cut and renew external and internal threads to exacting standards with the ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads. Each tap and die is constructed from hardened alloy steel for maximum strength so they can easily cut materials such as cast iron, steel, aluminum, copper, and more. This set includes coarse and fine threaded and numbered taps and dies from #4 - 40 to #12 - 24 and fractional taps and dies from 1/4" - 28 to 1/2" - 20, 1/8" - 27 NPT tap and die, metric tap and dies from M3 x .5 to M12 x 1.75, thread gauge, tap handle, die handle, and a small tap chuck. This 60-piece set is neatly contained inside a heavy-duty plastic blow-molded case for your convenience.
Tacklife 18PCS Damaged Screw Extractor with Separated Burnishing Bits and Extractors, Magnetic Extension Bit Holder and Socket Adapter for Damaged Bolts or Screws 2-12mm, Hardness 62HRC, DSE01

Tacklife 18PCS Damaged Screw Extractor with Separated Burnishing Bits and Extractors, Magnetic Extension Bit Holder and Socket Adapter for Damaged Bolts or Screws 2-12mm, Hardness 62HRC, DSE01

List Price: $28.97
Price: $8.97
Fantastic Features ➤ A wide assortment of bolt or screw heads can be covered (Pozis, Phillips, Slotted, Torxs, Square, Hexagons, Security Torx, etc.) ➤ Handling Stubborn of stripped, broken, damaged, embedded, rusted and painted-over screws without any problem ➤ S2 material and self-centering drill tips are precision engineered for multiple extractions and maximum performance ➤ Wide range of screw or bolt sizes as follows: #1 Remove Diameter 6~12mm #2 Remove Diameter 5~10mm #3 Remove Diameter 4~8mm #4 Remove Diameter 3~5mm #5 Remove Diameter 3.5~6.5mm #6 Remove Diameter 3~5.5mm #7 Remove Diameter 2.5~4.5mm #8 Remove Diameter 2~3.5mm Easy to Use ➤Separated burnishing (drilling) bits and extractor bits simplify the whole process, you don't need to flip the extractor and rotate the drill chuck again for extracting then ➤All the bits can be applied to any electric drills with or without the extension bit holder or Adaptor, depending on where the bolt is ➤Effortless switches of extension bit holder and socket adapter makes the little details of daily work enjoyable. No grinding or centre punching required. ➤A clip on the back of the tool case helps carry the small package everywhere you go and close at hand Instructions of Usage Change the speed of the electric drill under 400RPM, and press rotational switch reverse For bolts on flat surface, install with or without the extension bit holder into the drill and fully twist the drill chuck on; For bolts in a cramped space, the extension bit holder will be obviously needed Select a suitable drilling bit according to the specifications attached beside the bits with #1-8, then drilling a hole in the middle of the screw until the hole deep enough to be damaged Install the correspondent size of the extractor(collet) and then remove the damaged screw counterclockwise until it is released
Maximum Impact Bolt & Nut Remover Set 13 pieces

Maximum Impact Bolt & Nut Remover Set 13 pieces

List Price: $69.99
Price: $39.94
MAXIMUM Drive Impact Bolt Remover Set is ideal for removing rounded off, painted over and rusted bolts and nuts. Made from high carbon steel.This tool set will save you time and headaches.The socket is made of a good quality hardened material - even after cutting into a hardened bolt head.