G Zero Industrial - Shatter-Resistant CNC Router Bull Nose End Mill, 1/4" diameter, 2 flute, 5/8" LOC, .030" Radius, 2-1/2" OAL

G Zero Industrial - Shatter-Resistant CNC Router Bull Nose End Mill, 1/4" diameter, 2 flute, 5/8" LOC, .030" Radius, 2-1/2" OAL

List Price: $19.99
Price: $19.99
Carbide material provides better durability over high-speed steel for temperatures over 1000 degrees Fahrenheit, great for cutting wood and MDF. Shorter .625' length of cut reduces chatter for steady cuts in aluminum, wood, and plastic. 2 Flute design provides optimum chip evacuation in softer materials with higher feed rates. Perfect for use in a router or mill.
Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill, TiAlN Finish, 4 Flutes, 3/8" Cutting Diameter, 3/8" Shank Diameter, 2-1/2" Overall Length, 1"

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill, TiAlN Finish, 4 Flutes, 3/8" Cutting Diameter, 3/8" Shank Diameter, 2-1/2" Overall Length, 1"

List Price: $45.40
Price: $45.40
The Niagara Cutter C430R TiAlN-coated carbide corner radius end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. Corner radius end mills have a square end with rounded corners on the cutting edges to reduce chipping and extend the life of the tool. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles and make plunge cuts similar to a drill bit.
WIDIA Hanita 4K4203071 ArCut 4K42 HP Aluminum End Mill, 0.125" Cutting Dia, Carbide, Uncoated, RH Cut, 0.125" Shank Dia, 2-Flute

WIDIA Hanita 4K4203071 ArCut 4K42 HP Aluminum End Mill, 0.125" Cutting Dia, Carbide, Uncoated, RH Cut, 0.125" Shank Dia, 2-Flute

List Price: $13.15
Price: $13.15
ArCut end mills are equipped with a double rake face chip flute form, having a smaller than normal contact zone. This accelerates the chip during formation, resulting in a short curled chip, improving chip evacuation and surface quality. Due to the short curled chips, machining corners is drastically improved as chip packing is avoided. ArCut end mills are also a preferred choice when highly accurate machined straight walls are required.
WIDIA Hanita I2B0375T087R VariMill I2B GP Rough/Finish End Mill, Ball Nose, 0.875" LOC, 0.375" Cutting Dia, Carbide, TiAlN Coating, RH Cut, 2FL

WIDIA Hanita I2B0375T087R VariMill I2B GP Rough/Finish End Mill, Ball Nose, 0.875" LOC, 0.375" Cutting Dia, Carbide, TiAlN Coating, RH Cut, 2FL

Price: $74.02
VariMill GP offers plunging, slotting, and profiling for a wide range of materials and applications. Designed to provide high metal removal rates and excellent surface conditions at a value price. Special proprietary carbide substrates and state-of-the-art surface technology, combined with unique geometries, provides end users with the capability to significantly reduce machining time with heavier and deeper cuts, fewer passes, and faster surface speed. WIDIA geometries are uniquely formed and fine-tuned to optimized chip form, size, and evacuation generated by a given workpiece material.
WIDIA Hanita TC4K0308073 ArCut 4K03 HP Aluminum End Mill, 0.8125" LOC, 0.3125" Cutting Dia, Carbide, TiCN Coating, RH Cut, 3-Flute

WIDIA Hanita TC4K0308073 ArCut 4K03 HP Aluminum End Mill, 0.8125" LOC, 0.3125" Cutting Dia, Carbide, TiCN Coating, RH Cut, 3-Flute

Price: $58.72
ArCut end mills are equipped with a double rake face chip flute form, having a smaller than normal contact zone. This accelerates the chip during formation, resulting in a short curled chip, improving chip evacuation and surface quality. Due to the short curled chips, machining corners is drastically improved as chip packing is avoided. ArCut end mills are also a preferred choice when highly accurate machined straight walls are required.
WIDIA Hanita I2S0375T062S VariMill I2S GP Roughing/Finishing End Mill, 0.625" LOC, 0.375" Cutting Dia, Carbide, TiAlN Coating, RH Cut, 2-Flute

WIDIA Hanita I2S0375T062S VariMill I2S GP Roughing/Finishing End Mill, 0.625" LOC, 0.375" Cutting Dia, Carbide, TiAlN Coating, RH Cut, 2-Flute

Price: $48.76
VariMill GP offers plunging, slotting, and profiling for a wide range of materials and applications. Designed to provide high metal removal rates and excellent surface conditions at a value price. Special proprietary carbide substrates and state-of-the-art surface technology, combined with unique geometries, provides end users with the capability to significantly reduce machining time with heavier and deeper cuts, fewer passes, and faster surface speed. WIDIA geometries are uniquely formed and fine-tuned to optimized chip form, size, and evacuation generated by a given workpiece material.
WIDIA Hanita TC4K0203071 ArCut 4K02 HP Aluminum End Mill, 0.5" LOC, 0.125" Cutting Dia, Carbide, TiCN Coating, RH Cut, 0.125" Shank Dia, 2-Flute

WIDIA Hanita TC4K0203071 ArCut 4K02 HP Aluminum End Mill, 0.5" LOC, 0.125" Cutting Dia, Carbide, TiCN Coating, RH Cut, 0.125" Shank Dia, 2-Flute

Price: $40.26
ArCut end mills are equipped with a double rake face chip flute form, having a smaller than normal contact zone. This accelerates the chip during formation, resulting in a short curled chip, improving chip evacuation and surface quality. Due to the short curled chips, machining corners is drastically improved as chip packing is avoided. ArCut end mills are also a preferred choice when highly accurate machined straight walls are required.
Melin Tool VXMG Carbide Corner Radius End Mill, Variable Helix, nACo Monolayer Finish, Roughing Cut, Helix, 4 Flutes, 2" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter, 0.030" Corner Radius

Melin Tool VXMG Carbide Corner Radius End Mill, Variable Helix, nACo Monolayer Finish, Roughing Cut, Helix, 4 Flutes, 2" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter, 0.030" Corner Radius

List Price: $21.41
Price: $21.41
Designed for use in Titanium, Stainless Steel and all other ferrous materials up to 50HRc. Provides Chatter-Free machining. Enables higher spindle speed and heavier chip loads. Eccentric relief on the cutting edge provides enhanced edge strength and smoother cutting action. 3/8" diameter and larger can be ordered with a shank flat. Made from premium submicron grain carbide. Extended Neck Style end mills provide a short length of cut and a reinforced neck, providing maximum rigidity in long reach applications, and enabling an increase of up to 50% in feed rates over long flute tools. For applications requiring special reach lengths our No Neck Style end mills are available. For large diameter work (sizes 3/8 to 1-1/4 DIA), our Variable Helix Geometry is available as a standard, made from Powdered Metal - Series VHPM. Stub length.
1/2" 4-Flute SE AlTiN High Performance Carbide End Mill for Steels R155-0500HP

1/2" 4-Flute SE AlTiN High Performance Carbide End Mill for Steels R155-0500HP

List Price: $38.00
Price: $38.00
Rip Cutting Tools 1/2" 4-Flute SE AlTiN HYPERLOX Coating HP Carbide End Mill R155-0500HP, Features High Performance, 4-Flute, 38-Degree Helix, Variable Index, Eccentric Relief, Hpyerlox Coating, Center Cutting, Made in the USA, Specs: Cutting Diameter: 1/2" (0.500), Length of Cut: 1-1/4" (1.250), Shank Diameter: 1/2" (0.500), Overall Length: 3" (3.000) Material Base: Carbide, Coating: Hyperlox ALTiN, Helix: 38-Degree Variable Index (Unequal Helix) reduces chatter and harmonics, Center Cutting, Ecentric Relief, HYPERLOX coating for cast iron and steels up 60HRC.,YYPERLOX, the universal solution for all types of cast iron and steel up to 60HRC, is AlTiN-based. The high content of aluminum results in high hardness. The smooth and droplet-free surface and the excellent adhesion of the coating make HYPERLOX perfect for end mills, also increase tool life and productivity.
Wokesi 2mm 3mm 4mm 6mm Cutting Dia,Corner Radius End Mill Set,Pack of 4,Std Length,4Flutes,TiAlN Coated,HRC55,Solid Carbide,CNC Router Bits Milling Tools (2mm+3mm+4mm+6mm)

Wokesi 2mm 3mm 4mm 6mm Cutting Dia,Corner Radius End Mill Set,Pack of 4,Std Length,4Flutes,TiAlN Coated,HRC55,Solid Carbide,CNC Router Bits Milling Tools (2mm+3mm+4mm+6mm)

List Price: $34.00
Price: $34.00
4Pcs Corner Radius End Mill Size: 1.2mm Cutter:4 Flutes,Cutting DIA=2mm,SHK DIA=4mm,OAL=50mm,Corner Radius=0.2 . 2.3mm Cutter:4 Flutes,Cutting DIA=3mm,SHK DIA=4mm,OAL=50mm,Corner Radius=0.2 . 3.4mm Cutter:4 Flutes,Cutting DIA=4mm,SHK DIA=4mm,OAL=50mm,Corner Radius=0.5 . 4.6mm Cutter:4 Flutes,Cutting DIA=6mm,SHK DIA=6mm,OAL=50mm,Corner Radius=0.5 . Attention: 1.Solid carbide tools offer long tool life and faster cutting speeds than other substrates,but more brittle.make sure work piece and machine are stable,use quality collet chucks. 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions. 3.Adapt to several kinds of cooling conditions, for example oil mist,water,oil,air cooling.