Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET

Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET

List Price: $13.99
Price: $13.99
Top Quality M2 HSS Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes in stock. Sizes 1, 2, 3, 4 and 5, 60° tip angles.
NOVA 9018 Keyed Chuck with 2MT Spindle

NOVA 9018 Keyed Chuck with 2MT Spindle

List Price: $29.99
Price: $26.99
NOVA 9018 1/2" Drill Chuck is a precision chuck for use with Wood lathes and Drill Presses. Includes a 2MT spindle. Perfect drill chuck accessory for NOVA Lathes, or any lathe or drill press with a 2MT spindle. It can hold 1/6 inches/1.58mm through to 1/2inch/12.7mm. Comes complete with a Drill Chuck Key. Backed by a full replacement 2-year warranty from Tekna tool International, since 1955. Call our customer service center toll free on 1-866-748-3025.
PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece

PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece

List Price: $79.95
Price: $74.95
We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box
Robert Larson 800-2875 Plastic Center Finder

Robert Larson 800-2875 Plastic Center Finder

List Price: $9.12
Price: $4.59
A simple yet effective tool. Place on your wood stock to quickly find the center.
Einstein Tool Co. 1/2" JT33 Drill Chuck 2 MT Arbor/Mount for Lathes and Drill Presses Two Keys

Einstein Tool Co. 1/2" JT33 Drill Chuck 2 MT Arbor/Mount for Lathes and Drill Presses Two Keys

List Price: $34.99
Price: $26.96
Chuck Overview Customer satisfaction is our number one priority. Do not hesitate to reach out with questions or requests. You will get a prompt response from a knowledgeable person in Kansas City. Our goal is to provide great tools at reasonable prices. Being a maker myself I know the struggle to find good tools at a reasonable price. There is a lot of junk out there. This is the best drill chuck for the money to use with lathes and drill presses. This is a heavy chuck that is fully machined. No cast teeth on this chuck! We include two chuck keys because nothing is more frustrating than losing your only key in the middle of a project. This chuck works with most drill presses and lathes.Chuck Specifications: Brand new Capacity 1/32" to 1/2" Chuck input taper is JT33 - Jacobs taper 33 compatible Arbor is jt33 on the chuck side and MT2 - Morse taper #2 compatible on the Lathe / Drill press side Arbor is tapped for use with draw bars 7/16-20 Knurled body offers superior grip over standard chucks Two chuck keys included Threaded plug is available item # B07G7GVYKP
Approved for Automotive Deburring Tool w/Blade + 10 Extra Blades + Tungsten Carbide Scribe

Approved for Automotive Deburring Tool w/Blade + 10 Extra Blades + Tungsten Carbide Scribe

List Price: $15.73
Price: $15.73
This deburring kit by Approved for Automotive is the ideal solution for all your deburring related tasks. The kit consists of 1 hand held deburring tool with a blade, 10 extra blades and tungsten carbide scriber. Deburring tool easily holds all heavy-duty, 3.2mm, swivel head blades. Suitable for home use, plumbing applications or as a professional workshop tool. For example, you can use it for removing burrs from cut pipe, tubing, conduit, and PVC tubing thus making it a great pipe deburring tool.The tool can be used for cross holes, deep holes, straight edges and curved edges. The small size of the tool makes it really easy and convenient to carry around. The blade is easily replaceable and with multiple blades at your disposal you can carry out deburring with ease and precision. The pack of 10 blades comes in a handy plastic storage case. Unlike the regular blades that are made of carbon steel and have shorter life span, these blades are made with tempered high-speed steel and have 80% longer lifespan than the regular ones. This deburring tool kit works for steel, copper, aluminum and plastic.Tungsten carbide scriber is the perfect tool for making sharp accurate lines on hardened materials like hardened steel, stainless steel, ceramics and glass. Permanent magnet on the etching tool picks up small parts and retrieves steel chips from hard-to-reach places. Scriber point reverses for your safety.Product Specifications for Deburring Tool:Length: 150mmDiameter: 12mmWeight: 50gProduct Specifications for Blades:Length: 47mmWeight: 42gMaterial: M2 HSSHardness: 62-64RcProduct Specifications for Tungsten Carbide Scriber:Material: Aluminum plating, Magnet
Nova 48202 G3 Wood Turning Chuck Insert Type

Nova 48202 G3 Wood Turning Chuck Insert Type

List Price: $93.02
Price: $89.99
IMPORTANT NOTICE Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.
NOVA IDNS 1-Inch 8TPI Thread Chuck Insert/Adaptor

NOVA IDNS 1-Inch 8TPI Thread Chuck Insert/Adaptor

List Price: $16.64
Price: $16.64
NOVA IDNS 1-Inch 8TPI Chuck Insert/Adaptor allows you to 'adapt' your Insert Type NOVA Chuck to a 1-Inch 8 Lathe. Allows you to keep the same chuck and accessories if you change your lathe - you only need to change the insert/adaptor. The internal thread is 1-Inch 8 and the external thread matches the NOVA insert type chucks, to simply and easily screw into the back of your NOVA Insert Type Chuck. This then makes your NOVA insert type chuck ready to attach to your 1-Inch 8 threaded lathe spindle. Precisely machined from 1045 High Tensile Steel. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty.
Stone Tools ST-12 The Original Professional Master Chuck 1

Stone Tools ST-12 The Original Professional Master Chuck 1

List Price: $19.27
Price: $13.50
STOST12 Features: -Allows you to open over 200 different chucks. -The squared center of the keys opens acetylene tanks. -Black Steel Multiple Chuck Key 3/8 - 3/4 in.. Product Type: -Chuck Keys. Dimensions: Overall Product Weight: -0.5 Pounds.
Authentic Easy Wood Tools Ci3 Round Carbide Replacement Cutter for  Easy Start, Mini and Mid Midi Finishers and Full and Pro Size Hollowers Lathe Woodturning Tools Ci3

Authentic Easy Wood Tools Ci3 Round Carbide Replacement Cutter for Easy Start, Mini and Mid Midi Finishers and Full and Pro Size Hollowers Lathe Woodturning Tools Ci3

List Price: $16.99
Price: $14.44
This is a Authentic made in the USA Easy Wood Tools Ci3 round carbide cutter designed to fit the Easy Start, Mid and Mini Easy Wood Finishers and both Pro and Full Size Hollowers. Beware of cheap imitations of Easy Wood Tools carbide cutters. Authentic EWT cutters have the optimal 3G's of Carbide - Grade, Grind, and Geometry. 1) The Right Grade: Carbide is basically a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of the tungsten particle are referred to collectively as the 'grade'. There are literally hundreds of thousands of conceivable grades and no 'one grade' of carbide is suited for all applications - whether wood cutting or metal cutting. The perfect combination of cobalt and grain size in EWT Carbide cutters yields a cutting edge that is both the keenest and the most durable grade for woodturning available today. 2) The Right Grind: EWT grinds all of their cutters on super rigid CNC grinders to prevent micro chipping of the cutting edges. EWT uses the proper grit diamond wheels to produce the flattest, truest surfaces possible with minimal grinding scratches left on the surface.  All the cutter surfaces are ground in the optimum sequence to bring the edge into keenness during the very last process, or once again micro chipping of the cutting edges will occur if the proper sequence is not followed. 3) The Right Geometry: EWT grinds all their cutters to the correct angles and geometries specifically for woodturning.  This produces an edge that cuts both cleanly and safely for all skill levels. Only when grade, grind, and geometry are in harmony will you have a cutting edge for high performance woodturning. Comes with replacement 4-40 countersink machine screw.