HHIP 8600-0031 Heavy Duty Arbor Press, .5 Ton Capacity, 10" Height (Pack of 1)

HHIP 8600-0031 Heavy Duty Arbor Press, .5 Ton Capacity, 10" Height (Pack of 1)

List Price: $54.06
Price: $54.06
HHIP heavy duty arbor press. 4 position steel anvil. Precision made. Steel pinions. Base measures 9-inches length by 4-inches width. .5 ton capacity. 6.5-inches maximum diameter. 10-inches press height. 4.5-inches capacity over table.
JET AP-0 1/2 Ton Arbor Press

JET AP-0 1/2 Ton Arbor Press

List Price: $69.00
Price: $75.90
SWAG Off Road Arbor Press Plates (Pair) 7" X 7"

SWAG Off Road Arbor Press Plates (Pair) 7" X 7"

List Price: $109.95
Price: $109.95
Cut out of high strength grade 50-A572 steel plate. These arbor press plates are sold as a pair and are designed to replace the junk cast arbor plates that are prone to shattering under heavy load. Every SWAG arbor press plate is machined on both sides to remove mill scale and sharp edges. We currently offer 4 different sizes of arbor plates 7.00" X 7.00" X 1.0" Ideal size for factory replacement of the 12 ton Harbor Freight cast arbor plates 8.50'' X 10.00'' X 1.50'' Ideal size for factory replacement of the 20 ton Harbor Freight cast arbor plates 9.75" X 9.75" X 1.50" 12.00" X 12.00" X 1.50" The low cost cast arbor plates that are typical provided with hydraulic presses, often fail under shock loading. Learn from others and look at the 4th picture above provided by Mud Slayer 2.0 on Pirate4x4.com who was generous enough to provide the story below. "I was pressing on a bushing using a Harbor Freight 20 ton press with the provided cast arbor plates. I felt the bushing starting to get stiff. about 1/4" left to go I gave one good pull and I heard POW! I felt like I had been punched in the face by a gorilla as the cast arbor plate had just exploded.One of the guys in the shop came over to check on me and said "Dude you're face is bleeding" I had a gash right next to my left eye. I was driven to the Dr. office where I got 8 stitches. I was told I was very lucky I didn't lose my eye.When I returned to the shop I was looking at the press and noticed the porous nature of the arbor plates. This was the day I learned about the material properties of Cast Iron."
HHIP 8600-0131 Pro-Series Cast Iron Arbor Press, 1 Ton Capacity, 14" Height (Pack of 1)

HHIP 8600-0131 Pro-Series Cast Iron Arbor Press, 1 Ton Capacity, 14" Height (Pack of 1)

List Price: $95.11
Price: $103.24
HHIP pro-series arbor press for riveting, squeezing, punching, bending, and other pressing applications. Base drilled for mounting on bench or pedestal. Sturdy, cast-iron construction. Removable machined steel anvil provides accurate work support in four slot positions. Rugged steel ram is driven by machined pinion. Punches or tools may be added to the end of the ram with the aid of a magnetic insert. 8-.25-inches maximum diameter. 5.5-inches capacity over table. 1 ton press capacity and 14-inches height. Arbor press bit set included.
Palmgren Arbor press, 0.5 ton

Palmgren Arbor press, 0.5 ton

List Price: $74.00
Price: $84.99
Delivers the heavy force needed for riveting, squeezing, punching, bending, and other pressing applications. Removable machined steel anvil provides accurate work support in four slot positions. Depth stop securely clamps to the ram and withstands full pressure. A lockable fine adjustment adjusting screw accurately limits the depth of the ram stroke. Punches or tools may be added to the end of the ram with the aid of a magnetic insert. The ram is reversible with one end solid and the other end with a hole and magnet to hold bits and tools. Sturdy, cast-iron construction Rugged steel ram is driven by a machined pinion Base drilled for mounting on a bench or pedestal Includes three piece bit set - 1 pointed, 1 round and 1 square end bit, and a removable steel anvil The base is machine to hold the three bit set [custom1] SPECIFICATION DESCRIPTION Model AP05 Force .5 ton Lever Ratio 18.1:1 Swing 6- 1/2 in Anvil Diameter 3-1/2 in Max Work Height 4- 5/8 in Ram Dimensions 3/4 - 3/4 in Height 9- 1/4 in Base Dimensions 5- 1/8 x 9- 5/16 in Weight 19 lb [/custom1]
JET AP-2 2 Ton Arbor Press

JET AP-2 2 Ton Arbor Press

List Price: $209.00
Price: $229.90
SWAG Off Road Arbor Press Plates (Pair) 12.00" X 12.00" X 1.50"

SWAG Off Road Arbor Press Plates (Pair) 12.00" X 12.00" X 1.50"

List Price: $372.95
Price: $372.95
Cut out of high strength grade 50-A572 steel plate. These arbor press plates are sold as a pair and are designed to replace the junk cast arbor plates that are prone to shattering under heavy load. Every SWAG arbor press plate is machined on both sides to remove mill scale and sharp edges. We currently offer 4 different sizes of arbor plates 7.00" X 7.00" X 1.0" Ideal size for factory replacement of the 12 ton Harbor Freight cast arbor plates 8.50'' X 10.00'' X 1.50'' Ideal size for factory replacement of the 20 ton Harbor Freight cast arbor plates 9.75" X 9.75" X 1.50" 12.00" X 12.00" X 1.50" The low cost cast arbor plates that are typical provided with hydraulic presses, often fail under shock loading. Learn from others and look at the 4th picture above provided by Mud Slayer 2.0 on Pirate4x4.com who was generous enough to provide the story below. "I was pressing on a bushing using a Harbor Freight 20 ton press with the provided cast arbor plates. I felt the bushing starting to get stiff. about 1/4" left to go I gave one good pull and I heard POW! I felt like I had been punched in the face by a gorilla as the cast arbor plate had just exploded.One of the guys in the shop came over to check on me and said "Dude you're face is bleeding" I had a gash right next to my left eye. I was driven to the Dr. office where I got 8 stitches. I was told I was very lucky I didn't lose my eye.When I returned to the shop I was looking at the press and noticed the porous nature of the arbor plates. This was the day I learned about the material properties of Cast Iron."
KAKA Industrial AP-2S Arbor Press, Adjust Press Height Jewelry Tools, Solid Construction, Easy Operation 2 Tons Arbor Press

KAKA Industrial AP-2S Arbor Press, Adjust Press Height Jewelry Tools, Solid Construction, Easy Operation 2 Tons Arbor Press

List Price: $329.99
Price: $329.99
About KAKA Industrial: A Company Delivers High Quality Products with Fast Shipment and Lowest Price Possible. We Always Fulfill What We Have Promised KAKA Industrial AP-2S Arbor Press Overview The 2 ton arbor press is a great product for making jewelry tools and many more. The bench type makes it easy to use. 2 ton capacity allows more leverage when its in use. It is also easy to adjust the working height with the handle. Solid construction will guarantee a long term service life. Specification
  • Model: AP-2S
  • Capacity (KN): 20
  • Handle Power (N): 200
  • Travel (In): 8" +3-1/8"
  • Table Size: 8"x6"
  • Packing Size: 15x11x18"
  • Shipping Weight: 51 Lbs
JET AP-1 1 Ton Arbor Press

JET AP-1 1 Ton Arbor Press

List Price: $105.00
Price: $86.00
3-3/4" SLOTTED WHEEL PLATE 1/2" THICK TOOL PART FOR ARBOR PRESS

3-3/4" SLOTTED WHEEL PLATE 1/2" THICK TOOL PART FOR ARBOR PRESS

List Price: $10.99
Price: $10.99
Extra part for 1/2 TON ARBOR PRESS including #0. This is the anvil plate and it measures 3-3/4" diameter and approx. 1/2" thick - and has a little "stem" for lack of a better word on one side (see pics) that is approx. 1/4" diameter/height. It is slotted for a variety of uses. VERY HEAVY METAL (I think it's cast iron?). I have several of these for sale. NOTE: they have protective grease coated on them (some more than others). If you want a larger quantity of these please contact me.