Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench

Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench

List Price: $64.69
Price: $44.97
It's a drill press, tool holder and flex shaft holder all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches.
WEN 4212 10-Inch Variable Speed Drill Press

WEN 4212 10-Inch Variable Speed Drill Press

List Price: $201.95
Price: $163.80

Remember when power tools were actually powerful? WEN's 10-inch swing variable speed drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This drill press has the power to drill through metal, wood and other materials. The variable speed feature allows you to target in the exact speed (infinitely from 530-3100) that works for your project. Simply move a lever and adjust the speed as needed. No pulleys and belts to change. Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout displays the running speed. Constructed with a rigid frame consisting of cast iron. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 1/2 in. chuck with JT33 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has pre-drilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. Remember when you could drill with laser precision? Remember WEN.

HFS (Tm) 5" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamp Machine

HFS (Tm) 5" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamp Machine

List Price: $60.99
Price: $60.99
This 5" cross sliding vise will easily turn your drill press into a milling machine. Easily machine wood and metal parts with high precision and quality utilizing this vise and it's precise moving slides. Can also be attached to a lathe or other tools as needed to hold work pieces in the exact location needed. Durable cast iron construction Powerful serrated steel jaws Cold rolled steel screws 2 swivel crank handles for adjusting vise front to back and left to right Bolt down slots for securing Hinged vise crank handles drops out of the way Designed for woodworking and metalworking 4-3/4" throat opening 5" longitudinal and 4.5" cross travel Jaw width: 5" - Maximum jaw opening: 4 1/2" Vise and cross slide have adjustable shims Base size: 9 3/4" x 5 1/2" Cross slides have removable adjusting crank handles Overall unit size 11 1/2" x 11 1/4" x 6 3/4"
Delta 18-900L 18-Inch Laser Drill Press

Delta 18-900L 18-Inch Laser Drill Press

List Price: $1,048.00
Price: $1,048.00
NUZAMAS 2-in-1 Workstation | Drill Press | Drill Holder | Rotary Tool Holder | Flex-Shaft Tool Stand | Drilling Hole Station

NUZAMAS 2-in-1 Workstation | Drill Press | Drill Holder | Rotary Tool Holder | Flex-Shaft Tool Stand | Drilling Hole Station

List Price: $31.18
Price: $31.18
This Plunge Drill Stand is ideal for holding your drill or other rotary tool steady during use and allows for much more accurate drilling than hand-held operation. It is designed for use with hand-held electric drills with a collar diameter of 43 mm or 38 mm, It has a drilling depth up to 60 mm, The Stand can be locked and regulated by an adjustable depth stop with a graduated scale. Aluminum base for mounting flat-nose pliers slot. Note : Does Not Include Drill. Specifications: Base Material: Aluminum Drilling depth: Up to 60mm Total height: 400mm Bottom: 220*145mm Drill boss diameter: 38mm / 43mm Side clamping diameter drill: 35mm -38mm Aluminium base mounting instructions (1) Tightening the two screws and fixing the main shaft on the base. (2) Putting the travel assistant control ring into the main spindle. (3) Finally, putting the electric drill base inserts main spindle to strengthen fixing and completing instruction. Note: 2 Mounting Holes Bench Drill Side mounting holes´╝îBecause there is only one screw, it can not be used to compare the strong operation. Please Note there is Not cast iron for the base. To secure the base need screw fixing Package include 1X NUZAMAS Electric Drill Stand
Drill Stand for Hand Drill,Universal Bench Clamp Drill Press Floor Stand Workbench Repair Tool for Drilling Collet Workshop,Single Hole Aluminum Base

Drill Stand for Hand Drill,Universal Bench Clamp Drill Press Floor Stand Workbench Repair Tool for Drilling Collet Workshop,Single Hole Aluminum Base

List Price: $28.99
Price: $28.99
Description:This is a new adjustable drill stand, perfect for shop or home use.Constructed with aluminum ally base,solid column bar,durable to use.Designed for use with electric drills with collar diameter of 38-43mm (1.7"or 1.5"),with black plastic ring for better fix.Drilling depth up to 60mm(2.4"), single hole for mounting.This drill stand is ideal for holding your drill steady during use and allows for much more precise drilling than hand-held operation. Specification:Material: Aluminum Alloy+Iron Chuck diameter:Max.43mm (1.7"),Min.38mm(1.5")Drilling depth: Max. 60mm (2.4") Total height: 400mm (15.7") Shaft diameter: 25mm (1") Base Size:225×150×25mmPackage Weight:1550g Package Included:1 set of drill press stand(Need to assemble)
Shop Fox W1668 3/4 HP Bench-Top Oscillating Drill Press

Shop Fox W1668 3/4 HP Bench-Top Oscillating Drill Press

List Price: $379.00
Price: $379.00
Shop Fox bench top drill press and spindle sander
Goplus 5" Cross Slide Drill Press Vise X-Y Compound Vise Cross Slide Metal Milling 2 Way HD

Goplus 5" Cross Slide Drill Press Vise X-Y Compound Vise Cross Slide Metal Milling 2 Way HD

List Price: $54.99
Price: $54.99
Description Welcome to our store. This is our Heavy Duty 5" Cross Drill Press Vise which will Turn your drill press into a milling machine. Our item is of heavy duty steel construction and very durable. SpecificationsMaterial: Solid Steel Color: Dark Gray Vise travel: 7" Jaw width: 5" Base size: 9" x 5" Maximum jaw opening: 4.75" Package size: 14" x 14" x 8" package include: 1 x 5" Cross Drill Press Vise
Shop Fox W1667 1/2 HP 8-1/2-Inch Bench-Top Oscillating Drill Press

Shop Fox W1667 1/2 HP 8-1/2-Inch Bench-Top Oscillating Drill Press

List Price: $168.00
Price: $168.00
Shop Fox offers a broad assortment of drill presses to suit every need - from small hobby shops up to professional machine shops. Our unique oscillating models afford two-machine convenience in half the space and our radial drill presses offer unmatched versatility. For the best selection of features, performance and value, look no further than Shop Fox.
Kaka BSM-75N 3" Drill Press Clamping Vice

Kaka BSM-75N 3" Drill Press Clamping Vice

List Price: $19.99
Price: $19.99
  • Easy vices serie in high quality
  • Smooth running with exact jaw guides,also at a high axial load
  • Rolled spindle
  • Smooth running
  • Different possibilities of positioning long holes in the foot of the vice