SKIL 3320-01 3.2 Amp 10-Inch Drill Press

SKIL 3320-01 3.2 Amp 10-Inch Drill Press

List Price: $109.41
Price: $104.99
Skil 3320-02 10" Drill PressSkil Benchtop Power Tools are Quality Tools at a Great Price!Skil 3320-02 10" Drill Press Features: 3.2 amp motor LaserX2 2 Beam Laser System Depth Adjustment System Variable Speed-570-3,050 RPM 0-45 degrees left and right tilting work surfaceSkil 3320-02 10" Drill Press Specifications: Includes 10-in Drill Press with Laser Cast Iron Base and Work Table (2) AA Batteries Chuck Key
Evolution Power Tools 849713054050 EVO28 Magnetic Drilling System

Evolution Power Tools 849713054050 EVO28 Magnetic Drilling System

List Price: $379.00
Price: $379.00
1-1/8 Inch x 2 Inch Capacity Magnetic Drill with heavy-duty magnetic holding power. Includes chuck and adaptor for twist drills up to 1/2 inch diameter. Right or left side handles. Integrated coolant system.
Hougen HMD904 115-Volt Magnetic Drill

Hougen HMD904 115-Volt Magnetic Drill

List Price: $845.00
Price: $845.00
The Hougen HMD904 Portable Magnetic Drill is designed to produce superior holes quickly and efficiently.Through constant innovation and development, Hougen is committed to provide you with hole producing tools and products to help you be more productive. The drill of choice for fabrication. Lightweight, powerful, and versatile. Completely redesigned with additional features. Pilot light for low light conditions and greater hole accuracy. New Two stage magnet. Engages full power only when motor is turned on which increases magnet life. New Housing and slot drive arbor system. Positive slug ejection. Many accessories are available for a portable machine shop including: drill chucks, tapping, countersink, and more. For more information go to our site HougenMagDrills.
BLACK BLUEROCK ® Tools Model BRM-35A Typhoon Magnetic Drill Roto-Broach

BLACK BLUEROCK ® Tools Model BRM-35A Typhoon Magnetic Drill Roto-Broach

List Price: $384.00
Price: $384.00
• Specifications: o Drilling Capacity: 7/16"-1 1/2" o Drilling Depth: 2" o Tool Holder: Direct Arbor with" Weldon Shank o Motor Data: 110V/AC 60Hz o Speed: 570 Revolutions per/min o Magnetic Adhesion: 2600 ft/lbs o G. W.: 37 lbs o N. W.: 28 lbs o Stroke: 6.5" o Size: 19" x 15" x 8" Standard Twist Drill Bit Capacity (with Free Chuck): Up to 1" with step drilling. Generally customers use smaller than 7/16" standard twist drills bits with this machine. Also note that only short bits can fit with the free chuck attached as there is only 3.5" from magnetic base to bottom of the chuck. Bits not included.
Genesis GDP1005A 10" 5-Speed 4.1 Amp Drill Press with 5/8" Chuck, with Integrated work light and Table that Rotates and Tilts

Genesis GDP1005A 10" 5-Speed 4.1 Amp Drill Press with 5/8" Chuck, with Integrated work light and Table that Rotates and Tilts

List Price: $149.99
Price: $149.99
The Genesis GDP1005A is great for larger projects that require more power and versatility. The larger 5/8" chuck and 4.1 amp motor delivers power and performance you can count on for your DIY projects.
  • Powerful 4.1 Amp Motor
  • Integrated Work Light for convenience and visibility
  • 5/8” Chuck for larger bits
  • 5 Speeds to handle various materials
  • Easy to Access pulley housing makes speed changes a breeze
  • Smaller Foot print than a Floor Drill Press, Provides more room in your work shop
  • The table tilts 45° and rotates 360° for your demanding requirements.
Every Genesis Tool has a Two Year Warranty which means you can buy with confidence. Add The Genesis GDP1005A to your work shop today!
Hougen HMD904S 115-Volt Swivel Base Magnetic Drill

Hougen HMD904S 115-Volt Swivel Base Magnetic Drill

List Price: $956.00
Price: $956.00
HOUHMD904S Features: -W/SWIVEL BASE. -UNSPC CODE: 27111905. -Magnetic Drills, Parts & Accessories Magnetic Drills Parts Accessories mro plant maintenance magnetic drill drills part. -SWIVEL BASE HMD904.
Hougen HMD904 115-Volt Magnetic Drill w/coolant bottle plus 1/2" drill chuck, adapter and 12002 rotabroach cutter kit

Hougen HMD904 115-Volt Magnetic Drill w/coolant bottle plus 1/2" drill chuck, adapter and 12002 rotabroach cutter kit

List Price: $1,175.00
Price: $1,175.00
The HMD904 with its powerful performance, lightweight size, small footprint and hole capacity is the most popular model in the line of Hougen magnetic drills. The LED light is built into the base of the magnet and allows the operator to more efficiently and quickly line up the pilot with the hole's center location in low light or no light conditions. Powering the drill is a proprietary Hougen motor with a new design to the aluminum casing to improve durability. The addition of a two stage magnet increases magnetic holding power by 30% when the drill motor is turned on. This saves energy and increases magnet life. A new arbor system utilizes a 5/8" slot drive for more rigidity, hole accuracy and quicker use of accessories such as drill chucks and tapping attachments. The HMD904 has many additional features that make the drill easier to use; a more robust housing design with an ergonomic carrying handle, a spot to hold the hex wrench, reversible feed handles and a d-ring on the back of the magnet for quickly attaching the safety chain. The HMD904 weighs just 28.9 lbs (13.1 kg), measures 19-5/8"H x 7-3/4"W x 11-5/8"L (499mm x 197mm x 295mm) and provides drilling capacities from 7/16" up to 1-1/2" (12 - 38mm) diameter and 2" (50mm) depth of cut. The drill has an electrical rating of 9A and a 450 RPM motor. For safety the HMD904 incorporates Hougen exclusive features to insure a safe work environment including a no-adjustment safety switch, which shuts down the drill motor if lift of the magnetic base is detected plus an LED indicator that monitors this sensor and alerts if the safety switch is not properly engaged. A two stage power on switch prevents drill rotation unless the magnet has first been engaged, and, in the case of a power interruption, safety circuitry will keep the drill motor off after power is restored until the start button is manually depressed. The HMD904 is made in USA Swartz Creek, MI. Hougenmagdrills.com
CS Unitec MAB 155 Ultra Compact Low Profile Portable Magnetic Drill Press

CS Unitec MAB 155 Ultra Compact Low Profile Portable Magnetic Drill Press

List Price: $1,108.93
Price: $1,106.61
MAB 155 – ultra compact portable magnetic drill, horizontal motor mount for drilling in tight spaces. Drills up to 1-1/2 inch diameter, ultra compact 7 inch high.
Hougen HMD904S 115-Volt Swivel Base Magnetic Drill w/coolant bottle plus 1/2" drill chuck, adapter and 12002 rotabroach cutter kit

Hougen HMD904S 115-Volt Swivel Base Magnetic Drill w/coolant bottle plus 1/2" drill chuck, adapter and 12002 rotabroach cutter kit

List Price: $1,299.00
Price: $1,299.00
The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Now better than ever completely redesigned with more features The HMD904S with its powerful performance, lightweight size, small footprint and hole capacity is the most popular model in the line of Hougen magnetic drills.The LED light is built into the base of the magnet and allows the operator to more efficiently and quickly line up the pilot with the hole's center location in low light or no light conditions. Powering the drill is a proprietary Hougen motor with a new design to the aluminum casing to improve durability. The addition of a two stage magnet increases magnetic holding power by 30% when the drill motor is turned on. This saves energy and increases magnet life. A new arbor system utilizes a 5/8" slot drive for more rigidity, hole accuracy and quicker use of accessories such as drill chucks and tapping attachments. The HMD904S has many additional features that make the drill easier to use; a more robust housing design with an ergonomic carrying handle, a spot to hold the hex wrench, reversible feed handles and a d-ring on the back of the magnet for quickly attaching the safety chain. The HMD904S weighs just 28.9 lbs (13.1 kg), measures 19-5/8"H x 7-3/4"W x 11-5/8"L (499mm x 197mm x 295mm) and provides drilling capacities from 7/16" up to 1-1/2" (12 - 38mm) diameter and 2" (50mm) depth of cut. The drill has an electrical rating of 9A and a 450 RPM motor. For safety the HMD904 incorporates Hougen exclusive features to insure a safe work environment including a no-adjustment safety switch, which shuts down the drill motor if lift of the magnetic base is detected plus an LED indicator that monitors this sensor and alerts if the safety switch is not properly engaged. A two stage power on switch prevents drill rotation unless the magnet has first been engaged, and, in the case of a power interruption.
Genesis GDP805P 8 In. 5-Speed 2.6 Amp Drill Press with 1/2 In. Chuck & Tilt Table,

Genesis GDP805P 8 In. 5-Speed 2.6 Amp Drill Press with 1/2 In. Chuck & Tilt Table,

List Price: $99.99
Price: $99.99
The Genesis GDP805P is perfect for the DIY project that needs power and convenience at an affordable price. • Powerful 2.6 amp motor delivers power and performance via a 5 speed gear box. • The 1/2" chuck accepts larger bits and the table is able to Tilt 45° to meet your project needs. • Easy to access power switch with lock out option • Easy to Access pulleys to change speed range with 5 Different Speeds • Small Foot Print to provide more space on your work bench • Genesis' two year warranty means you can buy with confidence. Add the Genesis 8 In. 5-Speed 2.6 Amp Drill Press to your work shop today!