WEN 4208 8 in. 5-Speed Drill Press

WEN 4208 8 in. 5-Speed Drill Press

List Price: $81.81
Price: $74.55
Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.
WEN 4210 Drill Press with Laser, 10-Inch

WEN 4210 Drill Press with Laser, 10-Inch

List Price: $146.82
Price: $142.62
Remember when power tools were actually powerful? WEN’s 10-inch swing drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger, more industrial type drill presses, you can power through metal, wood and other materials with ease. Change from five speeds to target the exact RPM right for your project (600, 1100, 1700, 2400, 3100 RPM). Rigid frame construction of cast iron provides sturdiness and reliability. Its powerful induction motor features ball bearings for an extended life, all combining together with smooth and balanced performance at any speed. The 1/2” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A very versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachment, drum sanders, circle cutters, etc… Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes with laser precision? Remember WEN.
WEN 4214 12-Inch Variable Speed Drill Press

WEN 4214 12-Inch Variable Speed Drill Press

List Price: $238.99
Price: $238.99
Remember when power tools were actually powerful? WEN’s 12-inch swing, variable speed drill press with laser centering device, is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This bench-top, cast iron drill press has the power to drill through metal, wood and other materials. Max drill capacity is 5/8” in 1” thick cast iron. The variable speed feature allows you to target in the exact speed (infinitely from 580-3200 RPM) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LED’s displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base, ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 5/8” chuck with MT2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachments, drum sanders, circle cutters, etc. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill with laser precision? Remember WEN.
WEN 4212 10-Inch Variable Speed Drill Press

WEN 4212 10-Inch Variable Speed Drill Press

List Price: $176.70
Price: $163.80

Remember when power tools were actually powerful? WEN's 10-inch swing variable speed drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This drill press has the power to drill through metal, wood and other materials. The variable speed feature allows you to target in the exact speed (infinitely from 530-3100) that works for your project. Simply move a lever and adjust the speed as needed. No pulleys and belts to change. Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout displays the running speed. Constructed with a rigid frame consisting of cast iron. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 1/2 in. chuck with JT33 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has pre-drilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. Remember when you could drill with laser precision? Remember WEN.

Lukcase Floor Drill Press Stand Table for Drill Workbench Repair Tool Clamp for Drilling Collet,drill Press Table

Lukcase Floor Drill Press Stand Table for Drill Workbench Repair Tool Clamp for Drilling Collet,drill Press Table

List Price: $51.88
Price: $49.99
Specification: Type: Iron Bottom Bracket
Min- Max Clamp : 38-43mm Main Rod : 25*400mm
Size : 400*155*155mm Trip: 60mm (50mm is most suitable for long time work)
Base: Cast Iron Base Quantity: 1x Drill Bracket
Features:
90Degree rotable to drill slant hole. Copper plug readjustment to confirm the precision and durable.
Precise graduation, transparent pointer, spacing function.
Note:
The jaws specifications 38-43mm, comes with adapter sleeve can take about 38-43mm. Please amount under before making your drill size. If the drill can be slightly smaller cut yourself some piece of cardboard or rubber mat, if your drill size larger than the jaws (more than 43mm), then do not buy it.
Package includes: 1 pc of drill stand (electric drill in the picture is NOT included)
WEN 4225 8.6-Amp Variable Speed Floor Standing Drill Press, 15-Inch

WEN 4225 8.6-Amp Variable Speed Floor Standing Drill Press, 15-Inch

List Price: $499.99
Price: $525.46
Remember when power tools were actually powerful? The WEN 15-inch 8.6 Amp Variable Speed Floor Standing Drill Press meets the needs of both home and professional users. This model includes a full four inches of stroke capacity, allowing users to drill through materials up to four inches thick. With such a large spindle travel, drilling holes through a 4x4 board has never been easier. Adjust our variable speed anywhere from 280 to 1000 RPM with the simple turn of a lever, or make a quick belt adjustment for variable speed ranging from 1000 to 3300 RPM. The digital readout reports the current RPM of the machine for increased accuracy when drilling. The 12-inch by 12-inch cast iron table pivots up to 45 degrees in both directions while the laser pointer ensures precise holes. The chuck with Morse #2 spindle taper accepts bits anywhere from 1/12 to 5/8 inches in size. Cast iron frame and base gives the machine a hefty support system to prevent the drill press from walking or vibrating. The WEN 15-Inch Drill Press also includes a lamp to illuminate the worktable and convenient onboard storage for the chuck key. Remember when you could drill with laser precision? Remember WEN.
Ogrmar Drilling Collet Drill Press Table for Drill Workbench Repair Tool (BG-6117)

Ogrmar Drilling Collet Drill Press Table for Drill Workbench Repair Tool (BG-6117)

List Price: $49.99
Price: $49.99
0°- 90°rotable to drill slant hole. Copper plug readjustment to confirm the precison and durable. Precise graduation:transparent pointer,spacing fuctuion . Package includes:: 1x Drill Bracket Note: The jaws specifications 38-43mm, comes with adapter sleeve can take about 38-43mm. Please amount under before making your drill size. If the drill can be slightly smaller,you could cut yourself some piece of cardboard or rubber mat, if your drill size larger than the jaws (more than 43mm), then do not buy it.
Quick Set Drill Press Hold Down

Quick Set Drill Press Hold Down

List Price: $20.99
Price: $16.79
If you have ever been frustrated by the inadequate clamp opening and clumsiness of most drill press clamps, here is your answer. The post quickly mounts to most drill press tables with slots or holes, a bolt passes through the table and is secured with a large ring nut. To adjust the height for up to 5" of capacity, simply depress the clutch (similar to a pipe clamp) and slide the clamp head to the desired setting. Hold down pressure is provided by the cam action clamp on the head which features a 1-1/2" diameter rubber foot to help prevent marring your workpiece
Genesis GDP1005A 10" 5-Speed 4.1 Amp Drill Press with 5/8" Chuck, with Integrated work light and Table that Rotates and Tilts

Genesis GDP1005A 10" 5-Speed 4.1 Amp Drill Press with 5/8" Chuck, with Integrated work light and Table that Rotates and Tilts

List Price: $149.99
Price: $119.99
The Genesis GDP1005A is great for larger projects that require more power and versatility. The larger 5/8" chuck and 4.1 amp motor delivers power and performance you can count on for your DIY projects.
  • Powerful 4.1 Amp Motor
  • Integrated Work Light for convenience and visibility
  • 5/8” Chuck for larger bits
  • 5 Speeds to handle various materials
  • Easy to Access pulley housing makes speed changes a breeze
  • Smaller Foot print than a Floor Drill Press, Provides more room in your work shop
  • The table tilts 45° and rotates 360° for your demanding requirements.
Every Genesis Tool has a Two Year Warranty which means you can buy with confidence. Add The Genesis GDP1005A to your work shop today!