DEWALT DCV517B Baretool 20V MAX Cordless 1/2 gallon Wet/Dry Portable Vac Kit

DEWALT DCV517B Baretool 20V MAX Cordless 1/2 gallon Wet/Dry Portable Vac Kit

List Price: $99.00
Price: Too low to display
The DEWALT DCV517B 20V MAX* Cordless 1/2 gal Wet/Dry Portable Vac - Bare tool is great for general jobsite clean up, with a HEPA system allows fine dust clean up like drywall and masonry. The HEPA wet/dry filter traps 99.97% of dust at 0.3 microns. This is a washable filter that can be cleaned with a tap water rinse to clean. It has dual clean-up modes which allow for debris removal with either the front utility nozzle or with an extendable heavy duty rubber hose that provides durability and flexibility. The 1/2 gallon tank with heavy-duty latch is easy to empty and clean. Large on/off switch that is easy to access with one hand and runs off of 20V Max* DEWALT battery packs for long run-time (battery sold separately). Includes: (1) DCV515B 1/2 gal Vac.
WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)

WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)

List Price: $126.38
Price: $125.99
Remember when your workshop was full of clean air? Air-borne dust particulates can dirty up a woodworker's workshop and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The powerful 1/6 HP motor leaves no stone unturned, collecting every contaminant in its path. Quiet system creates 50 to 60 dB of noise and is controllable up to 26 feet away with the included remote. The lightweight design weighs in at a mere 31 pounds. Combine this with the attached carrying handle and eyebolts for easy mobility, mounting and installation. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between three speeds of 300, 350 and 400 cfm depending on what the situation calls for. With the time feature, you don't even have to worry about turning off your machine. Simply set the timer and the machine will turn off on its own once the time runs out, allowing you to easily give your workshop a thorough cleanse at the end of a day of woodworking without having to be present. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System is backed by a two-year warranty, a helpful customer service phone line, and a nationwide network of experienced technicians. Remember when you could breathe easy in your workshop? Remember WEN.
Automated Vacuum Switch

Automated Vacuum Switch

List Price: $49.95
Price: Too low to display
The Intelligent Vacuum Switch eliminates the distraction of turning on and off a dust collection system while you are operating potentially dangerous power tools. Received ETL safety approval. Three modes of operation: Auto, Off , On and Turn-On delay avoids the two power surges occurring at the same time Turn-Off delay clears work area of remaining debris after tool has stopped. Two input power cords permit operation from two separately protected circuits when the combined load from tool and vacuum exceed 15 Amps. Both power cords are individually protected with 15 Amp circuit breakers. Compact and lightweight, switch mounts to the wall. Designed to conveniently enhance your work shop safety.
PSI Woodworking DBGULP Big Gulp Dust Hood

PSI Woodworking DBGULP Big Gulp Dust Hood

List Price: $18.24
Price: $17.79
PSI Woodworking's Big Gulp dust hood has a large 13-by-16-inch opening. It's an ideal hood for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods. It's lightweight and portable and has a tough ABS plastic construction. The 4-inch port to connects to any dust collection system.
Makita XLC02ZB 18V LXT Lithium-ion Cordless Vacuum, Tool Only

Makita XLC02ZB 18V LXT Lithium-ion Cordless Vacuum, Tool Only

List Price: $79.00
Price: Too low to display
The Makita 18V LXT Lithium-Ion cordless vacuum (XLC02ZB, tool only, batteries and charger sold separately) is a compact and powerful solution for fast and efficient cleaning. At only 18-3/4” in length this compact vacuum can be used as a “hand-vac”, or with the floor nozzle extension for floors, carpets, and hard-to-reach spaces. It has a redesigned floor nozzle for improved debris Collection, and a bag-less 2-stage cloth Filtration system for easy cleaning and Quick debris disposal. When using an 18V LXT 5.0Ah battery (sold separately), users will get up to 33 minutes of continuous use on a single charge. It is compatible with Makita 18V LXT and 18V LXT compact Lithium-Ion batteries. It’S part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector

SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector

List Price: $395.00
Price: $324.00
A powerful dust collector from Shop Fox. This unit features an extra heavy-duty 12" steel impeller and a 1-1/2 HP motor that runs on 110V. For wood dust only. Features 2.5 micron filtration.
DEWALT DCV517M1 20V MAX Cordless 1/2 gallon Wet/Dry Portable Vac Kit

DEWALT DCV517M1 20V MAX Cordless 1/2 gallon Wet/Dry Portable Vac Kit

List Price: $199.00
Price: Too low to display
The DEWALT DCV517M1 20V MAX* Cordless 1/2 gallon Wet/Dry Portable Vac Kit is great for general jobsite clean up, with a HEPA system allows fine dust clean up like drywall and masonry. The HEPA wet/dry filter traps 99.97% of dust at 0.3 microns. This is a washable filter that can be cleaned with a tap water rinse to clean. It has dual clean-up modes which allow for debris removal with either the front utility nozzle or with an extendable heavy duty rubber hose that provides durability and flexibility. The 1/2 gallon tank with heavy-duty latch is easy to empty and clean. Large on/off switch that is easy to access with one hand and runs off of 20V Max* DEWALT battery packs for long run-time. Kit includes: DCV517B Vac, DCB204 Battery, DCB115 Charger.
Shop Fox W1826 Wall Dust Collector, 2.5 Micron Filtration

Shop Fox W1826 Wall Dust Collector, 2.5 Micron Filtration

List Price: $216.00
Price: $186.01
This wall mounted Dust Collector is designed to capture dust right at the source, eliminating the reduced efficiency of a duct system. With 537 CFM capacity, it will handle just about any hungry woodworking machine, and with no complicated duct system, static pressure loss is minimal. A simple wall mounted bracket and locking screw system also ensures you'll be safely up and running in no time!
DEWALT DWE46152 Surface Grinding Dust Shroud, 5-Inch

DEWALT DWE46152 Surface Grinding Dust Shroud, 5-Inch

List Price: $79.00
Price: Too low to display
The DEWALT DWE46152 5" Surface Grinding Dust Shroud is designed to contain the dust in your work area when working on concrete grinding. This unit features a flush grinding door which allows dust collection for flush edge grinding. The universal vacuum hose connection locks onto the tool with a twist and click eliminating the use of tape to secure the hose to the shroud. Includes: DWE46152 Dust Shroud, DWV9000 Universal Connector.