DEWALT DCF887B 20V MAX XR Li-Ion Brushless 0.25" 3-Speed Impact Driver

DEWALT DCF887B 20V MAX XR Li-Ion Brushless 0.25" 3-Speed Impact Driver

List Price: $139.00
Price: Too low to display
The DEWALT DCF887B 20V MAX XR Li-ion Brushless 1/4" 3-Speed Impact Driver Bare tool features a DEWALT built brushless motor. This impact driver has 3-speed settings for optimized application versatility, along with Precision Drive in speed 1 for precision applications and added control. It offers three (3) LED lights with 20 second delay after trigger release to provide visibility without shadows. It also allows for one-handed loading 1/4" hex chuck with easy grip sleeve, and accepts 1" bit tips. This unit has a compact and lightweight design to fit into tight areas (2 mm shorter than the previous DCF886). Includes belt clip. This is a bare tool item - battery sold separately.
Hex Imp Drv Bare 1/4m12

Hex Imp Drv Bare 1/4m12

List Price: $102.55
Price: $102.55
The M12 FUEL 1/4 in. Hex Impact Driver once again raises the bar for 12V performance with best in class driving speed, power and size. By focusing on productivity, this Impact Driver gets the job done faster by being over 20 percent faster in application speed vs. the competition. This tool outputs over 1,300 in. lbs. of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1 in length allows for unmatched access in tight spaces. The POWERSTATE Brushless Motor delivers up to 0-3,300 RPM with constant power output to drive screws faster. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with M12 REDLITHIUM Compact Batteries or Extended Capacity Batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility by delivering 0-1,300 RPM in Mode 1, 0-2,400 RPM in Mode 2 and 0-3,300 RPM in Mode 3. Mode 4 is Self-Tapping Screw Mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
BLACK+DECKER BDCI20C 20V MAX Lithium Impact Driver

BLACK+DECKER BDCI20C 20V MAX Lithium Impact Driver

List Price: $63.97
Price: $59.97
The BLACK+DECKER BDCI20C 20v MAX Lithium Impact Driver features a high performance transmission that delivers 1375 in-lbs of max torque (determined by 30 second impact load gauge test method). This driver has a quick release 1/4" hex chuck. This unit offers variable speed, operates at 0-3000 rpm, and 0-39000 BPM. The BDCI20C Impact Driver is compact & lightweight for ease of use for all types of jobs. Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Includes: (1) BDCI202 Impact Driver, (1) 20v Max Battery, (1) Charger, (1) Screwdriving bit.
ARES 70006 | 3/8-inch Drive Manual Reversible Impact Driver | Flathead 5/16-inch, 3/8-inch, and Phillips #2, 3 Bits Cover Most Common Applications | Disengage Rusted Fasteners or Frozen Bolts

ARES 70006 | 3/8-inch Drive Manual Reversible Impact Driver | Flathead 5/16-inch, 3/8-inch, and Phillips #2, 3 Bits Cover Most Common Applications | Disengage Rusted Fasteners or Frozen Bolts

List Price: $17.62
Price: $17.62
Disengage With Ease The ARES 3/8-inch Drive Manual Reversible Impact Driver allows you to loosen frozen bolts, rusted body panel fasteners, and corroded brake calipers with just a few strikes of a hammer and without causing damage. With four interchangeable bits to choose from with Precision-Milled Tips for exact fit, you'll save yourself the enormous hassle of having to drill and tap many of even the most stubborn fasteners.
  Features:
 
  • Includes: Storage Case, 3/8-inch drive manual impact driver, 3/8-inch drive bit chuck, and 4 pc.screwdriver bits
  • Two 5/16-inch hex shank Flat Heads- 5/16- and 3/8-inch
  • Two 5/16-inch hex shank Phillips Heads #2, #3
  • Bits have Precision-Milled tips for exact fit
  • Impact driver has Corrosion-Resistant chrome plated finish
  • Non-slip knurled grip
  • Strike top of tool with hammer to turn drive tang 20 degrees in desired direction
  • Can be used with impact sockets, on nuts, bolts, and other fasteners
Milwaukee M18 18V 1/4" Hex Impact Driver - Bare Tool (2656-20)

Milwaukee M18 18V 1/4" Hex Impact Driver - Bare Tool (2656-20)

List Price: $64.99
Price: $59.99
The M18 Cordless 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. REDLINK Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18 Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
DEWALT DCF787C1 Impact Driver

DEWALT DCF787C1 Impact Driver

List Price: $149.00
Price: $99.99
The DEWALT DCF787C1 20V MAX* Cordless Impact Driver Kit with Battery and Charger is powered by a 20V MAX battery (1.5 Ah battery included). DEWALT 1/4-in impact driver's compact and light design allows the tool to be utilized in tight areas while the 3 LEDs provide visibility in dark, confined areas without producing shadows. DEWALT brushless motor delivers up to 57% more run time over brushed motors and the ergonomic comfort grip handles reduce user fatigue and increase tool control. Impact driver is backed by DEWALT 3-year limited warranty, providing peace of mind.
Ryobi One+ P236 18V 1/4 Inch 3,200 RPM 1,600 Inch Pounds Lithium Ion Cordless Impact Driver (Battery Not Included, Power Tool Only)

Ryobi One+ P236 18V 1/4 Inch 3,200 RPM 1,600 Inch Pounds Lithium Ion Cordless Impact Driver (Battery Not Included, Power Tool Only)

List Price: $49.94
Price: $45.99
Look no further than the Ryobi P236 Impact Driver for your fastener driving needs. At 3,200 revolutions per minute and 1,600 inch pounds of torque, it has more than enough power for most driving functions around the house. It also comes loaded with useful features that will make your driving time easier. LED lights near the chuck help brighten up your workspace. You'll be able to maintain stability with the rubber overgrip that increases friction for slippery conditions. You'll be able to use both hands on the unit without holding fasteners and extra bits thanks to the magnetic tray at its base. Bit replacement is a breeze, too. Simply pull out the collar and slide in the bits to keep them locked. Do the reverse to pull them out. No tools are necessary here! There is even a phillips bit included at the base of this tool as a little bit of extra value. Being part of the One+ family, it's able to work with the Ryobi 18V batteries that already exist, or will exist as long as the One+ name does. With that kind of utility, it's no surprise that homeowners and professionals alike trust Ryobi to deliver premium results.
Milwaukee 2753-20 M18 Fuel 1/4 Hex Imp Driver tool Only

Milwaukee 2753-20 M18 Fuel 1/4 Hex Imp Driver tool Only

List Price: $98.99
Price: $94.99
M18 Fuel 1/4 Hex Imp Driver tool Only. The Product is Easy to Use and Easy to Handle. The Product is Highly Durable. Made In China.
DeWalt Impact Driver Ready 3-Piece Socket Adapter Set DW2541IR, DW2542IR, DW2547IR

DeWalt Impact Driver Ready 3-Piece Socket Adapter Set DW2541IR, DW2542IR, DW2547IR

List Price: $16.95
Price: $16.95
Genuine DeWalt Socket Adapter Set that includes DW2541IR (1/4" hex shank to 1/4" socket), DW2542IR (1/4" hex shank to 3/8" socket), and DW2547IR (1/4" hex shank to 1/2" socket) adapters. This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool. These impact ready adapters are rated for the most demanding of applications (2000 in/lb of torque). The 1/4" hex shank fits all quick change chucks as well as standard drill chucks.