Wisamic DIY CNC Router Kits 1610 GRBL Control Wood Carving Milling Engraving Machine for Plastic, Wood, Acrylic, PVC, PCB with 3 Axis Working Area 160x100x45mm

Wisamic DIY CNC Router Kits 1610 GRBL Control Wood Carving Milling Engraving Machine for Plastic, Wood, Acrylic, PVC, PCB with 3 Axis Working Area 160x100x45mm

List Price: $159.99
Price: $159.99
Note
1. Some components and core parts have been assembled. It still requires some simple hand assembling according to the instructions(in the disc).
2. Compatible with plastic, wood, acrylic, pvc, pcb, wood. Not for metal, jade or other hard materials
3. This machine is not industrial grade level.
4. Basic CNC and professional mechanical knowledge is needed to use this machine. May not for beginner. Software recommend:
Control Software: GrblController (included)
Tool path creation software: Artcam2008 (not included)
PCB processing software: Coppercam (not included) Specification
- Control software: GRBL control
- Construction: Aluminum and plastic
- Working area: 6.3 x 3.9 x 1.6inch, 160 x 100 x 40mm
- Frame size: 10.2 x 9.4 x 8.7inch, 260 x 240 x 220mm
- Spindle: 775 spindle motor (12-36V) 24V: 7000r/min, 36V: 9000r/min
- Step motor: 1.3A 0.25N.m
- Wire rod: T8
- Power Supply: 24V 5.6A (110V -240V)
- Support System: Windows XP/Win 7/Win 8/Linux
- Standard: The complete set of the parts and tools
- Engraving materials: Plastic, wood, acrylic, PVC, PCB and other soft materials Package content
1 x Set engraving machine
1 x Set Frame
4 x Set plates
10 x Cutters
1 x Disk (software and instruction)
Mophorn Dividing Head BS-0 5Inch 3 Jaw Chuck Dividing Head Set Precision Semi Universal Dividing Head for Milling Machine Rotary Table Tailstock Milling Set (5 Inch Chuck)

Mophorn Dividing Head BS-0 5Inch 3 Jaw Chuck Dividing Head Set Precision Semi Universal Dividing Head for Milling Machine Rotary Table Tailstock Milling Set (5 Inch Chuck)

List Price: $268.49
Price: $268.49
BS-0 Precision Dividing Head 5" 3 Jaw Chuck Tailstock Dividing Plate CNC Milling Introduction : This is our semi-universal dividing head,one of machine tool accessories for dividing workpieces into equal partitions. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand. It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type. Technical Parameters Swing: 7-7/8" Center Height: 3-15/16" Headstock Taper: 7 B&S Number of holes: A-Plate:15,16,17,18,19,20 B-Plate:21,23,27,29,31,33 C-Plate:37,39,41,43,47,49 Worm gear reduction ratio: 1:40 Hole Through Spindle: 0.709" Threads on back plate: 1-1/2" - 8 Spindle Bore (Clear Through): .708" Spindle Mount: 1-1/2" x 8 TPI Spindle Taper Runout: .0006" Features -Head stock swivels to all angles -All number from 1-50 -All even numbers from 50-100 -Many others from 50-400 -Spindles with tapered roller bearings are on integral part of all diving heads -Can be easily Adjusted to any angle between +10 to 90 degrees from a horizontal position
Beauty Star 1Set DIY Mini CNC 300w DC Spindle Motor + 52MM Clamp + 110V Power Converter + 13 PCS ER11 Collect

Beauty Star 1Set DIY Mini CNC 300w DC Spindle Motor + 52MM Clamp + 110V Power Converter + 13 PCS ER11 Collect

Price: $89.99
CNC 300W Air Cooled Spindle Kit for DIY Engraving Package Included: 1 x 300W Spindle Motor 1 x Speed Governor with Potentinmeter 1 x Mount Bracket 4 x Screws 13 x ER11(1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm) Feature: Size: 52mm Power: 300W Voltage: 48V DC Speed: Up to idle up to 10000 rev / min Air Cooling ER11 collet Maximum Torque: 0.23mN.m Runout Off: 0.01-0.03mm Dielectric Strength: 400V Power Supply speed governor Input: AC1100V ± 10%50/60Hz ★★Note: 1. The mounting bracket is NOT threaded. You will need to bolt this to a threaded object for it to hold. The bracket has only clearance holes. 2. Suitable for light carving(wood or light aluminum) operations, NOT for high density aluminum or steel.
DIY CNC Router Kits 3018 GRBL Control Wood Carving Milling Engraving Machine (Working Area 30x18x4.5cm, 3 Axis, 110V-240V), with ER11 and 5mm Extension Rod

DIY CNC Router Kits 3018 GRBL Control Wood Carving Milling Engraving Machine (Working Area 30x18x4.5cm, 3 Axis, 110V-240V), with ER11 and 5mm Extension Rod

List Price: $599.99
Price: $249.90
MYSWEETY 3018 cnc machine for study and research, requires self-assembly and commissioning. It requires certain professional mechanical knowledge, so make it not the best choice for a beginner. The package come with English manual and software in the cd disk. If not, please contact me for instructions and software. Parameters:Working area: 30x18x4.5cmFrame material: Aluminum, PVC, PlasticFrame size: 33x40x24cmSpindle: 775 spindle motor (12-36V) 24V: 10000r/minSpindle Chuck: ER11Supported System: Windows XP / Win 7 / Win 8 / Win 10 / LinuxStep motor: Fuselage length 34MM, Current 1.33A, 12v. Torque 0.25N/MDrill bits: tip 0.1mm, 20 degree, diameter3.175mm (Contains 10 pcs)Software: GRBL controllerPackage inclued:1pcs Full set engraving machine10pcs bits1pcs extension rod with ER11 collet(Please contact us for English manual after you purchased)Notice:The machine for a full set of spare parts, shall be installed by the buyers.We suggest cnc-based buyers to buy, this machine is not industrial grade level.
Farmertec 36 Inch Holzfforma Portable Chainsaw Mill Aluminum Steel Mig Welding Sawmill 14" to 36" Guide Bar Woold Lumber Cutting Milling Saw Mill Guide Bar Planking Milling Bar

Farmertec 36 Inch Holzfforma Portable Chainsaw Mill Aluminum Steel Mig Welding Sawmill 14" to 36" Guide Bar Woold Lumber Cutting Milling Saw Mill Guide Bar Planking Milling Bar

List Price: $118.89
Price: $118.89
This listing is about brand new,high quality
1 Year replacement warranty is available after you receives it if its quality comes out with some problems
Fast & Easy Installation 7.5KGS Portable ChainSaw Mill
NOTE: The chainsaw and guide bar do not included
Fits: Chain saw with bar length from 14" to 36"
Material: Aluminum & Steel
Efficient & Versatile 36 Mill
Cuts lumber planks Height & Width Adjustable
Attaches directly to your chainsaw bar
Packing Weight: 8.0000 KG
Item NO: HF80002
Introduction:
The Portable Sawmill turns your chainsaw into a lumber mill. Just attach this lightweight, portable sawmill with adjustable side bracket to your chainsaw and you're ready for the big or small jobs, cutting any log length. Hardware included for fast and easy installation.
Advantages:
Cuts lumber planks Height & Width Adjustable.
Attaches directly to your chainsaw bar.
Perfect for builders, woodworkers, & outdoor enthusiasts.
Portable system can be easily transported to remote logs.
Mounts to chain bar with a few turns of a wrench.
CNC Spindle Kit 500W Air Cooled 0.5kw Milling Motor + Spindle Speed Power Converter + 52mm Clamp + 13pcs ER11 Collet + 10pcs CNC Bits for DIY Engraving

CNC Spindle Kit 500W Air Cooled 0.5kw Milling Motor + Spindle Speed Power Converter + 52mm Clamp + 13pcs ER11 Collet + 10pcs CNC Bits for DIY Engraving

List Price: $199.99
Price: $119.99
Feature: Input: AC110V± 10%50/60Hz Operating voltage: 100VDC Power: 500W Current: 4A Speed: Up to idle up to 12,000 rev / min Torque: 5000G/CM Insulation resistance: > 2 megohms Dielectric strength: 400V Diameter: 52mm Chuck portion length: 45MM Chuck portion diameter: 16mm Motor Length: 200MM High precision spindle runout 0.01-0.03 Power supply Specification: (and this spindle supporting the use of the) 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm), Run-out tolerance 0.01mm (0.0006") 10Pcs Bits: 3.175*20°*0.2mm Package including: 1 x 500W Air-Cooled Spindle Motor 1 x 110V Speed Governor with MACH3 1 x 52mm Mount bracket 13 x ER11 collect 10 x Bits(3.175*20°*0.2mm) 4 x Screws(free)
Beauty Star Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz ER11 Collet for Wood Carving Water Colling Engraving Milling Spindle 220v AC Spindle 4 Bearing

Beauty Star Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz ER11 Collet for Wood Carving Water Colling Engraving Milling Spindle 220v AC Spindle 4 Bearing

List Price: $169.99
Price: $143.99
1pcs 1.5kw Spindle Motor Water Cooled 65mm ER11 220V 1500W CNC Spindle With 4xBearings Package include: 1pcs 1.5kw Water Cooled Spindle 1pcs ER11 collect Feature: 1.Spindle Motor Power:1.5KW Size:65mm Voltage:220V Frequency:0-400Hz Speed:0-24000rpm Cooling:Water Cooling Runout off:less than 0.005mm Germany SKS 4pcs bearing Grease Lubrication Current: 8A Main Application: Engrave for Wood,bamboo,normal PCB,PVC,PMMA,plastic,bamboo,duotone board(ABS)and etc nonmetal,also can engrave on gold,silver,copper,aluminium,Pb etc soft metal surface working. Note: When starting-up the spindle, reference frequency and maximum frequency must be set to 400Hz. Then it can be adjusted to a lower frequency slowly.
DIY CNC Router Kit, 24x17cm, Mini Milling Machine, USB Desktop Engraving Carving Machine, For Wood and Metal

DIY CNC Router Kit, 24x17cm, Mini Milling Machine, USB Desktop Engraving Carving Machine, For Wood and Metal

List Price: $399.74
Price: $294.95
Product parameters * Machine size: 430 * 430 * 330mm ; * Net weight: 7.5kg ; * Working area: 240 * 170 * 65mm ; * Input power: DC12V ; * Positioning accuracy: 0.04mm ; * Software: Grbl ; Engraving Materials: * The machine can carve wood, plastic, acrylic, PCB CCL, soft metal like copper and aluminum and other materials. ; * Can not carve hard metal, jade and other very hard texture of the items. ; Product Accessories: * 1 pc Mechanical engraving machine ; * 1 pc Spindle motor ; * 1 pc Power supply ; * 1 pc Data lines ; * 3 pc Knife ;
MYSWEETY 1Set DIY 110V 1500W Air Cooled Spindle Motor 1.5KW Square CNC Machine Tool Spindle + 110V 1.5KW Inverter VFD + 13PCS ER11+ 70mm Brush + Drill Bits

MYSWEETY 1Set DIY 110V 1500W Air Cooled Spindle Motor 1.5KW Square CNC Machine Tool Spindle + 110V 1.5KW Inverter VFD + 13PCS ER11+ 70mm Brush + Drill Bits

List Price: $499.99
Price: $349.98
110V 1.5KW Air Cooled Square CNC Spindle Motor + 13PCS ER11 Collet + 1.5KW 110V Inverter1. Air Cooled Square Spindle:Size: 36**16*15cmCooling: Air cooledMaterial: Stainless steelPower: 1.5KWVoltage: 110VFrequency: 0-400HzSpeed: 0-24000rpmAccuracy: 0.003-0.005Grease LubricationWater Cooling ER11 collet (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm)Bearing type: 4 Bearing, Angular contact bearings, P4 grade, 2x7005C P4 DT and 2x7003C P4Power Interface: optional GX16 air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground.Main Application: engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working.2. Inverter:Brand Name: HY Inverter Type: 1.5KW/110V Input Voltage: 110V Output Voltage: 110VAC Input Frequency: 48-63 Hz Output Frequency: 0-400 Hz Input Phase: 1 or 3 phase Output Phase: 3 phaseRun-out tolerance 0.01mm (0.0006")Control Mode is SPWM, it is very easy to use and convenient.Strong protection functions. Fin over-heat protection. Overload protection. Fuse protection. Restart after instant stop, stall protection.3.70mm brush: Type: dust cover brush Diameter:70mm 70mm Brush Vacuum Cleaner Engraving machine Dust Cover for spindle motor. 4.Drill bits: Diameter: 3.175mm Tip:0.1mm Angle: 20°Package include:1x 110V/1.5KW Square Spindle Motor 1x 1.5KW/110V HY INVERTER1 x 70mm Brush10 x Drill Bits13x ER11 Collet(1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7mm)
OrangeA 6 Inch ACCU Lock Down Vise Precision Milling Vice - 6 Inch Jaw Width - Drill Press Vise Milling Drilling Machine Bench Clamp Clamping Vice (6'')

OrangeA 6 Inch ACCU Lock Down Vise Precision Milling Vice - 6 Inch Jaw Width - Drill Press Vise Milling Drilling Machine Bench Clamp Clamping Vice (6'')

List Price: $117.99
Price: $117.99
6 Inch Drill Press Vise Lock Vise Milling Machine - 6 Inch Jaw Width - Precision Milling Drilling Machine Bench Clamp Clamping Vice Introduction:
Precision machine vise has powerful clamping force and can fix workpieces very securely. The main attachments for milling ,drilling machine, it is paticularly suitable for the finishing of precision parts. Features:
6'' ACCU lock vise ; Jaw Width: 6"; Jaw Opening: 5.9"; Jaw Height: 1-3/4"
Unit overall dimension: 18/14" x 9" x 10"; Unit approx. weight: 53 lbs
Accurate to 0.00098 inch/3.94inch on parallelism and Squareness
Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt
Sliding surface of the vise bed is flame hardened and ground Item Specifications:
Jaw width: 6"
Jaw opening: 5.9"
Jaw height: 1-3/4"
Parallelism and squareness: Approx. 0.00098 inch/3.94 inch
Gross weight: Approx. 59.4lbs Note:
- Handle with care, avoid rough operation which might shorten its lifespan
- Keep children away from the machine Package:
1 X 6" Precise Clamping Lock Vice