Upgrade Version CNC 1810 Pro GRBL Control DIY Mini CNC Machine, 3 Axis Pcb Milling Machine, Wood Router Engraver with Offline Controller, with ER11 and 5mm Extension RodList Price: $599.99
Some components and core components have been assembled, simply hand assembled according to the installation instructions, you can use the rack. Download the English manual : https://s3.us-east-2.amazonaws.com/1610machine/1610PRO.zip 1810 pro machineļ¼ 1. All accessories don't need to be positioned, it reduce the assembly difficulty greatly with high precision. 2. It doesn't use any corner pieces, one-piece molding, no error. 3. The base is 4cm height with high strength and high stability. 4. The machine has been positioned when the motor is installed, you don't need to adjust it again. 5. It can work by offline controller and will be convenience. Specification: Profile Dimensions: 26x24x22cm Engraving area: 18x10x4.5cm Spindle: 775 spindle motor Softwear: GRBL control systems support system: 24V 5A adapter Stepper motor: 42 Stepper motor Spindle: 775 spindle motor (12-36V) 24V:10000r / min Supported System: Windows XP / Win 7 / Win 8 / Win 10. Drill bits: tip 0.1mm ,20 degree , diameter3.175mm. the package include 10pc. clamps: 4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm Usage: can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. Package inclued: 1pcs Full set engraving machine 1pcs offline controller 4pcs clamp 10pcs bits 1pcs extension rod with ER11 collet
The Pro Mill Stop by Edge Technology can be mounted on any available T-slot anywhere along the milling machine table allowing it to accurately locate a workpiece for any type of setup. It is designed to keep the stop rod square to the work piece throughout the entire range of motion. This configuration provides a more consistent locating surface for increase part accuracy. The base of the unit is also keyed to the T-slot of table for increased consistency. After locating the workpiece the arm of the Pro Mill Stop can be rotated out of the way for total cutter clearance. The arm can then be accurately repositioned for repeat setup. Protected by one or more US patents.
Metabo corded beveling tool for weld preparation, edge preparation, bevel, Chamfer and radius.
The Pro Stop by Edge Technology is designed with the CNC machinist in mind. Its super low profile design stays completely below the top surface of the vise which means it will not interfere with cutting tool paths. It will also keep the stop rod square to the workpiece throughout the entire range of motion. This configuration provides a more consistent locating surface for increased part accuracy. After locating the workpiece the arm of the Pro Vise Stop can be rotated out of the way for total cutter clearance. The arm can then be accurately repositioned for repeat setup. A stop rod collar is also included to allow longer than usual stock lengths to be located. Protected by one or more US patents. • Low profile design stays below the top surface of vise jaws for cutter clearance. • Versatile design allows the 1/4" hardened stop rod to be quickly and accurately positioned. • Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy. • Lever arm can be rotated out of the way for cutter clearance and accurately relocated for repeat setup. (loosening and retightening of screw is required) • Two sets of mounting holes for added versatility. • Mounting hardware included. • Locate long stock with the included stop rod collar. • Versions available for 4", 5", and 6" standard style vises. • Large 1/2"-13" bolt used to rigidly attach lever arm. • Non-marring 1/4"-20 nylon tip set screw used to secure stop rod mount without damage to lever arm. • Non-marring 1/4"-20 flat point set screw used to secure stop rod without damage. • Body made from red anodized 6061-T6 aluminum.
This Adjustable Tailstock provides the support you need for longer workpieces. Approximate weight: 40.2 lbs.
It has a large scraps discharge space, little resistance and smoothly during the scraps discharge. Use high quality materials and fine grinding process makes bit more sharp cutting edge, reduce cutting force and broken drill, improve the quality of hole wall. Note: it is not suitable for handheld electric drill
MYSWEETY CNC Spindle Motor Kits, 2.2KW Water Cooled Spindle Motor 2.2KW Inverter + 80MM Clamp Mount +13PCS ER20 Collet + 5M Water Pipe + Water Pump for CNC RouterList Price: $599.99
1.Spindle Motor: Size: 80mm Power: 2200W Voltage: 220V Frequency: 0-400Hz Speed: 0-24000rpm Water Cooling ER11 collet Runout off: less than 0.001mm Germany SKS 4pcs bearing Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT Grease Lubrication Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground 2.Inverter: Type: 2.2KW/220V Input: 220VAC/50Hz Output: 0-220VAC 3-phase Frequency: 0-400Hz Size: 168x124x161mm 3.ER20 Collet Set: Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm) Run-out tolerance 0.01mm (0.0006") 4.Water Pump: Voltage: 220V Structure: Single-stage Pump Pressure: High Pressure Application: Submersible Usage: Water 5.5M Water Pipes: Length: 5M Can be connected between Water Pump and Spindle Motor 6.Spindle Motor Clamp Mount: Diameter: 80mm Material: Aluminum,Surface sandblasted Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing Package include: 1 x 2.2KW Spindle Motor 1 x 2.2KW VFD 1 x 75W Water Pump 1 x 5M Water Pipes 1 x 80mm Spindle Clamp (Free 3pcs screws) 13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)1 x 70mm Brush 10 x Drill BitsHow to connect: The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (184.108.40.206) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
Beauty Star Laser Engraving Machine Laser Engraver Printer 3000MW Mini Desktop Laser Engraver Machine DIY Logo Laser Engraver CE Approved Working Area 80X80MMList Price: $289.99
Features: Color: Purple Material: ABS + Aluminium alloy Voltage: AC 110-220V Laser power: 3000mW Engraving area: 80x80mm (3.1"x3.1") Depth of engraving: 1mm Applicable scope: plane surface Support System: for Windows XP / 7/8/10 Supports picture formats: JPEG / JPG / PNG / BMP Features: Home engraving machine for engraving wood, plastics, leather, etc. Product Size: 15.5x16x14cm
How to Start device to work? 1. First Copy all files in USB DISK and save to your PC. This is important to use machine later. 2. There are 3 file folders in USB DISK: MAC, WIN, Picture. Select to click "MAC" or "WIN" according to your PC operating system. 3. For MAC system, Pls open file folder of "CH341SER_MAC", Double Click File of "CH34x_Install_V1.4.pkg" to install driver. And For WIN system, Pls double click file of "driver". 4. Link Power Cable Line to power outlet and USB Data Line to PC. 5. Open file of Software in Folder of MAC or WIN to start work.
Packing list: 1 x Laser engraver 1 x Power adapter 1 x USB disk 1 x USB cable 1 x Screw driver 5 x Screws and caps 1 x User Manual 1 x Free set for test(Wooden board and Laser focusing paper)
Note: 1. Do not use the laser head to point at human or livestock,do not use laser to point at people's eyes. 2. Laser has power.skin exposure to laser is strictly prohibited. 3. Metal, glass, crystal and transparent or translucent stuff are can not be engraved. 4. Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break, can not work continuously for a long time. 5.Don't Touch the Device and Engraving Material to any movement, Keep their Still when working.6.Warranty Period: 30 days free replacement or refund,1 year warranty and whole life customer service
Condition: 100% New Color: Silver Material: Aluminium & Steel Net weight(approx): 12lbs Fits: Chain saw with bar length from 14" to 24" Featureļ¼ Efficient & Versatile Cuts lumber planks Height & Width Adjustable Mill slabs from 1/2" up to 12" thick & 24" wide Portable system can be easily transported to remote logs Perfect for builders, woodworkers, & outdoor enthusiasts Attaches directly to your chainsaw bar Package Included: 1 PC Chainsaw Mill 1 SET assembling Tool 1 PC USER MANUAL ļ¼chainsaw and guide bar are not included