.22 Caliber Power Load "A" Crimp, Yellow (Level 4)

.22 Caliber Power Load "A" Crimp, Yellow (Level 4)

List Price: $8.66
Price: $8.66
Powder Loads For Simpson Strong-Tie® Powder-Actuated Tools, Yellow. Use in tools from Simpson Strong Tie, Ramset, Cobra, Viper, Hilti, and Remington. High quality and dependability. All loads are color coded and load level numbered. As the number increases, the power level increases. Always start with the lightest strip load. If the fastener does not set completely, use the next higher load and repeat the process.
ITW Ramset 00022 HammerShot Low Velocity Powder Actuated Tool Replaces HD22

ITW Ramset 00022 HammerShot Low Velocity Powder Actuated Tool Replaces HD22

List Price: $25.98
Price: $25.98
The Ramset Hammer Shot 0.22 Caliber Single Shot Tool is a hammer-actuated tool utilizing 0.22 caliber loads. This tool is great for small DIY projects. The HammerShot can easily fasten up to 2-1/2 in. drive pins.
ITW BRANDS 40066 .22 Caliber Trigger Shot Tool

ITW BRANDS 40066 .22 Caliber Trigger Shot Tool

List Price: $55.00
Price: $44.77
Use for instant fastening into concrete, masonry, or steel. This tool is great for small DIY projects. Has a single-shot trigger that's easy to use.
Hilti DX 2 0.27 Caliber Semi-Automatic Powder-Actuated Fastening Tool

Hilti DX 2 0.27 Caliber Semi-Automatic Powder-Actuated Fastening Tool

Price: $255.00
1x DX 2 Powder-actuated tool;1x 5/8 Round brush;1x 5/C32 Round brush;1x Round brush;1x Spares pack DX 2 packed;1x Case
Ramset Powder Fastening Systems COBIII Cobra Tool Kit

Ramset Powder Fastening Systems COBIII Cobra Tool Kit

List Price: $227.97
Price: $219.00
16941 Features: -Padded recoil-absorbing handle for greater operator comfort. -Fastens up to 3'' standard Ramset drive pins and threaded studs. -Uses .27 caliber 10-shot strip loads 2 (Brown), 3 (Green), 4. -(Yellow), 5 (Red). Generic Dimensions: -13-1/4'' length. Dimensions: Overall Height - Top to Bottom: -17 Inches. Overall Width - Side to Side: -3.5 Inches. Overall Depth - Front to Back: -13 Inches. Overall Product Weight: -8.9 Pounds.
Powers Fasteners P2201 Fastening Tool

Powers Fasteners P2201 Fastening Tool

List Price: $45.99
Price: $45.99
Powers Fasteners P2201 Fastening Tool
Rapidair K3000 Automatic Shutoff Tire Inflator, Black

Rapidair K3000 Automatic Shutoff Tire Inflator, Black

List Price: $199.99
Price: $199.99
The Rapidair automatic Tire inflator with shutoff feature is a professional quality handheld unit. Unique design allows the Tire pressure to be set on the unit, then pushing start fills the Tire to the desired pressure. No more stopping and starting checking the Tire pressure. Saves time and fills each Tire accurately. Audible Tone when Tire pressure is reached.
8' Fiberglass Extension Pole For Ramset Cobra PLUS ( Newest Model ) ~ LS-8-RCP

8' Fiberglass Extension Pole For Ramset Cobra PLUS ( Newest Model ) ~ LS-8-RCP

List Price: $299.00
Price: $299.00
Extension pole for the Newest Cobra plus ( See Picture ) Will not work with the two older generation cobra Pluses. 6' Model also available in our store. Message us for quote on other lengths.
HIlti 3530249 FS-ONE MAX 10oz tube (1 case) firestop fire protection systems

HIlti 3530249 FS-ONE MAX 10oz tube (1 case) firestop fire protection systems

List Price: $216.80
Price: $205.73
12x FS-ONE MAX 10.1oz cartridge
Piston To Fit Ramset Cobra PLUS First Generation (Old Style, Read Description Below Carefully) SC385903

Piston To Fit Ramset Cobra PLUS First Generation (Old Style, Read Description Below Carefully) SC385903

List Price: $34.95
Price: $34.95
This piston will only fit the Ramset Cobra PLUS, with power adjustment. It is not meant for Standard Cobra, without power adjustment. There are two other style cobra pluses. This IS meant for the cobra plus with the front and rear barrel that connects together with a shear clip ( Old Style ) It is NOT meant for the cobra plus that has a buffer and a fastener guide that screws into the barrel ( 2ND Generation ) It is also NOT meant for the Cobra Plus that has a plastic housing and Silencer (Newest Style) Please refer to your tool manual to verify part #SC385903.