Evolution Power Tools RAGE3 10-Inch Multipurpose Cutting Compound Sliding Miter Saw

Evolution Power Tools RAGE3 10-Inch Multipurpose Cutting Compound Sliding Miter Saw

List Price: $199.99
Price: $199.00
The RAGE3 offers all the functionality of a normal miter saw, while cutting through materials never thought possible. This 10” sliding compound miter saw will cut steel, aluminum, plastics, and wood (even wood with nails); using just one blade. The cut is fast, clean and accurate; producing no burr and virtually no sparks when cutting steel. There is no heat buildup either, so the material is cool and can be handled straight away.

Multipurpose cutting is coupled with useful features such as an in-line handle enabling right or left handed use, adjustable cutting depth for grooving, laser guidance system and robust outer casing enhancing durability. A high torque motor and optimized gear box make this a powerful and reliable compound sliding miter saw.

A full range of blades is also available (sold separately) to turn this saw into a sliding tile cutter and to allow for more specific metal cutting applications. The Rage 3 Sliding Compound Miter Saw, comes with Evolution’s 3 Year Limited Warranty.

Motor: 1800W (Soft Start)
Amps: 15
Horsepower: 2.5
RPM (No Load): 2500
Blade Arbor: 1 inch, with dual flange to allow for 5/8” arbor blades
Maximum Width of Cut (90 degree Miter): 11-13/16 inches
Maximum Width of Cut (45 degree Miter): 8-1/4 inches
Maximum Depth of Cut (90 degree Bevel): 3 inches
Maximum Depth of Cut (45 degree Bevel): 1-1/2 inches
Evolution Power Tools EVOSAW380 15-Inch Steel Cutting Chop Saw

Evolution Power Tools EVOSAW380 15-Inch Steel Cutting Chop Saw

List Price: $420.00
Price: $366.00
Evolution EVOSAW380 15-inch steel cutting Chop saw offers the highest grade industrial metal cutting strength on the market today. When cutting steel, the EVOSAW380 cuts cold, No coolant is required. Because the material is cold it can be Handled and worked on immediately. The EVOSAW380 comes with a 14-inch mild steel cutting, 66 tooth carbide Tipped blade. This cut off saw has a 15-inch blade capacity, for extended reach, and a full blade range is available for more specific cutting applications (sold separately). the EVOSAW380 cold cutting Chop saw outperforms abrasives, cutting faster, with blades lasting 20x's longer. This machine cuts steel with virtually No heat, burrs, or sparks. It is ideal for cutting steel plate, square tube, angle iron, pipe, tube and metal roofing. Includes Evolution's 3 year warranty. The EVOSAW380 is an upgraded version of the Steelsaw2, which has been discontinued. TECHNICAL SPECIFICATIONS
Motor: 1800W
Amps: 15
Horsepower: 2.4
RPM (No load): 1450
Blade Arbor: 1 inch CUTTING CAPACITY (WITH SUPPLIED 14 INCH MILD STEEL CUTTING BLADE)
Rectangle Tube Cut (0° x 0°): 3-3/4" x 7-1/8”
Rectangle Tube Cut (0° x 45°): 3" x 4-3/8”
Square Tube Cut (0° x 0°): 4-3/4" 2
Square Tube Cut (0° x 45°): 3-1/8" 2
Round Tube Cut (0° x 0°): 5-1/8"
Round Tube Cut (0° x 45°): 4-1/8"
Mild Steel Plate - Max. Thickness: 1/4"
Mild Steel Box Section - Max. Wall Thickness: 1/8"
Minimum Cut Off Piece Length: 1/2" CUTTING CAPACITY (WITH 15 INCH MILD STEEL CUTTING BLADE, PURCHASED SEPARATELY)
Rectangle Tube Cut (0° x 0°): 3-3/4" x 7-7/8”
Rectangle Tube Cut (0° x 45°): 3" x 4-3/8”
Square Tube Cut (0° x 0°): 5" 2
Square Tube Cut (0° x 45°): 3-1/2" 2
Round Tube Cut (0° x 0°): 5-7/8”
Round Tube Cut (0° x 45°): 5"
Mild Steel Plate - Max. Thickness: 1/4"
Mild Steel Box Section - Max. Wall Thickness: 1/8"
Minimum Cut Off Piece Length: 1/2"
DEWALT D28710 14-Inch Abrasive Chop Saw

DEWALT D28710 14-Inch Abrasive Chop Saw

List Price: $179.99
Price: $174.59
Value not found
DEWALT D28715 14-Inch Quick-Change Chop Saw

DEWALT D28715 14-Inch Quick-Change Chop Saw

List Price: $219.00
Price: $199.00
DEWALT DW872 14-Inch Multi-Cutter Saw

DEWALT DW872 14-Inch Multi-Cutter Saw

List Price: $435.00
Price: $435.00
Makita LC1230 12-Inch Metal Cutting Saw

Makita LC1230 12-Inch Metal Cutting Saw

List Price: $424.99
Price: $424.99
Makita EK7651H 14-Inch MM4 4 Stroke Power Cutter

Makita EK7651H 14-Inch MM4 4 Stroke Power Cutter

List Price: $2,100.00
Price: Too low to display
Makita EK7651H 14" MM4 4 Stroke Power Cutter
  • Automatic engine decompression valve is engineered into the cam gear to reduce pull start force by 40%
  • Five-stage, foam-paper-nylon filtration system with advance direction air flow provides cleaner air for better engine durability
  • Integrated wheels reduce fatigue during long straight cuts and retract when not in use to prevent unexpected movement
  • Clear primer bulb facilitates fuel delivery to the carburetor for easier cold starts pressure compensated carburetor with vented choke plate is engineered to reduce flooding by automatically adjusting to deliver the proper amount of fuel
Advanced oil separation and lubrication system to improve valve train durability and engine life. Our specially treated rods, followers and valves minimize wear and extend engine life. It has a single lever on-off-choke operation switch for operator convenience. The shielded exhaust outlet and larger spark arrestor screen prevents contaminates from restricting air flow. The external fuel tank vent eliminates pressure build up sealed cartridge recoil starter rope reduces wear by keeping out dust and debris. The cutting arm easily changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above the ground. The cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort. It has a convenient oil level check and easy oil maintenance for longer engine life. There is easy access carburetor for more convenient repair and maintenance. The replaceable tank fuel filter is easily accessible without special tools. The included water kit with quick release attachment is adaptable to most common hose threads.

Note: Blade sold separately.
Evolution Power Tools RAGE2 Multi Purpose Cutting Chop Saw, 14-Inch

Evolution Power Tools RAGE2 Multi Purpose Cutting Chop Saw, 14-Inch

List Price: $299.99
Price: $190.00
Multi-purpose - cuts steel, aluminum, wood plastic. Faster cleaner cuts than an abrasive wheel. No coolant required produces virtually no sparks. Offers an instantly workable finish. Doesnt lose depth of cut during use like an abrasive wheel does. Includes V-Block Vise for securely clamping pipe
PowRyte 3-Inch Air Cut-Off Tool

PowRyte 3-Inch Air Cut-Off Tool

Price: $11.99
Description: PowRyte 3-Inch Air Cut Off Tool is great for cutting mufflers, clamps, joints and bolts quickly and easily with material up to 3/4in thick. The chrome-Plated steel guard protects you from sparks during operation. The built-in power regulator allows for precise control of the speed for multiple applications. An integral safety-lock throttle lever prevents accidental start up. This cutoff tool also features a rear air exhaust, and built-in silencing reduces noise level. Specification: Cutting Wheel Size     3 in. Maximum Rated Speed    18000rpm Working Pressure       90 PSI Average Air Consumption  4 CFM @ 90 PSI Tool weight          1.3 lbs Housing Material       Die-cast Aluminum Air Inlet           1/4-18NPT Recommended hose size   3/8 in. Include: Collet wrench Allen wrench 1/4" NPT male plug About PowRyte:Save More Do More on a wide range of quality mechanical and electronics products. With PowRyte's innovative company structure and advanced native management system, we save your money in every step of our operation chain, with a guarantee of high-quality and reliability. We deliver the most saving and best value to you. About PowRyte:Shop now with PowRyte and you will never worry about overpaying anything. Specifically designed for entry level DIY workers, PowRyte tools maximizes your saving by delivering quality tools with the LOWEST PRICES throughout the market.
DEWALT DWE1622K 2-Speed Magnetic Drill Press, 2-Inch

DEWALT DWE1622K 2-Speed Magnetic Drill Press, 2-Inch

List Price: $769.99
Price: $759.99
The DEWALT DWE1622K 2" 2-Speed Magnetic Drill Press features a 10 amp motor with 2-speed settings that provide optimal performance in a variety of applications. This press has overload protection electronics which prevent motor damage and excess accessory wear designed for long life. A Quick Change chuck system allows for tool free change between 3/4" Weldon Shank and 1/2" keyed chuck, and the Quick Release feed handles provide tool free change of handles to either side of the tool. The magnetic self feed cooling tank allows the user to regulate the flow of cooling fluid and can be placed on either side of tool or on a work surface to allow for a variety of tool orientations. 4" Drill travel offers maximum capacity for heavy duty applications, along with a motor height adjustment that gives greater range of accessory compatibility. Includes: DWE1622 Drill Press, Safety chain, and Height adjustment tool, Quick change 1/2-in keyed chuck, Kit box