BLACK+DECKER AS6NG Alkaline Cordless Screwdriver

BLACK+DECKER AS6NG Alkaline Cordless Screwdriver

List Price: $8.73
Price: $8.73
The Black & Decker 6-volt alkaline battery cordless screwdriver is great for those Quick fixes around the house. It features an automatic Spindle Lock for greater control when starting and finishing screws or for manual use, if desired. There's a forward/reverse switch and a narrow nosepiece for extra help in tight places. A rubber grip provides comfort and control.
DEWALT DWE575SB 7-1/4-Inch Lightweight Circular Saw with Electric Brake

DEWALT DWE575SB 7-1/4-Inch Lightweight Circular Saw with Electric Brake

List Price: $159.00
Price: Too low to display
View larger
View larger
View larger
The Dewalt DWE575SB 7-1/4-inch lightweight circular saw with electric brake is designed to be one of the lightest and well balanced saw in its class at only 8.8 pounds, with an electric brake that stops the blade after the trigger is released. A ball bearing lower guard provides a durable design — even against dust contamination for smooth retraction — along with the high grade stamped aluminum shoe that provides the user with a durable and smooth base for accurate cutting. Advanced lower guard geometry for bevel cuts with integrated dust blower allows the user to clear the sightline while cutting. A patented tough cord protection system provides 3x durability against cord pull-out. On-board blade wrench storage allows for easy storage and convenience for blade changes. It also includes a handy carrying case for easy portability.
Small but Powerful
Weighing only 8.8 pounds and measuring 7.2 inches in width, the DWE575SB is one of the lightest circular saws in its class. Despite its small size, the unit delivers plenty of power to perform some of the most demanding applications with 1,950 Max Watts Out (MWO) and 5,100 revolutions per minute (RPM). The saw is ideal for framers, concrete formers, general contractors, and remodelers who are tasked with completing applications ranging from framing walls to cutting plywood, siding, exterior finishing, and more. Also, thanks to an integrated dust blower that cleans the user’s line of sight before cutting and high quality gears, the saw provides smooth cutting, high quality performance. The saw also features a 57-degree bevel capacity, with 22.5- and 45-degree detents, and a 2 9/16-inch depth of cut capacity, which is best in class and allows for a variety of applications.
Tough and Durable
To provide durability, DEWALT incorporated several features into the design of the new circular saw. For instance, a ToughCord cord system provides three times more resistance to cord pullouts when compared to circular saws without a ToughCord system. To aid in comfort and balance, the new circular saw features ergonomic handles and trigger actuation. The DWE575SB also features an electric break that allows for the saw blade to stop after two to three seconds from the time the trigger is released, providing additional safety. This feature allows users to start repetitive cuts faster.
What's in the Box
7-1/4 inch circular saw, blade wrench, carbide-tipped 7-1/4 inch circular saw blade, user instruction manual, contractor bag.
Key Specifications
  • Amps: 15 amps
  • Max Watts Out: 1950 watts
  • No Load Speed: 5200 rpm
  • Bevel Capacity: 57 degrees
  • Bevel Stops: 22.5 and 45 degrees
  • Electric Brake: Yes
  • Rear Pivot: No
  • Blade Diameter: 7-1/4 inches
  • Depth of Cut at 90 degrees: 2.55 inches
  • Depth of Cut at 45 degrees: 1.9 inches
  • Tool Weight: 8.8 pounds
Bosch Random Orbit 5 inch Sander/Polisher ROS20VSC with Carrying Bag

Bosch Random Orbit 5 inch Sander/Polisher ROS20VSC with Carrying Bag

List Price: $69.00
Price: $49.00
The Bosch ROS20VSC is designed to give even the most exacting finish carpenters, cabinet makers, woodworkers and others exactly what they want, beginning with great performance and results. The optimized combination of pad orbit and rotation delivers fast removal and a well-blended, ultra-smooth finish. Bosch's integral pad dampening system, a pad braking system, is designed to eliminate the most common complaint of random orbit sander users; swirl marks on the workpiece. Finish quality is further enhanced with the use of a soft microcellular backing pad. The pliable pad ensures a smooth, fine finish on flat or contoured surfaces. Includes: RS034 Soft Sanding Pad, 2609199179 Micofilter Dust Canister, VAC002 Vacuum Hose Adapter, Sanding Disc, 2609170071 Dampening Ring, Carrying Case.
Bosch 12-Volt 2-Tool Combo Kit (Drill/Driver and Impact Driver) CLPK22-120 with two 12-Volt Lithium-Ion Batteries, 12V Charger and Carrying Case

Bosch 12-Volt 2-Tool Combo Kit (Drill/Driver and Impact Driver) CLPK22-120 with two 12-Volt Lithium-Ion Batteries, 12V Charger and Carrying Case

List Price: $165.15
Price: $99.00
Includes 12V Max Cordless Lithium-Ion 3/8 in. Drill Driver - PS31, 12V Max Cordless Lithium-Ion Impact Driver - PS41, (2) 12V Max Lithium-Ion Batteries, 12V Lithium-Ion Charger - BC330, Carrying Case
WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)

WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)

List Price: $126.38
Price: $126.38
Remember when your workshop was full of clean air? Air-borne dust particulates can dirty up a woodworker's workshop and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The powerful 1/6 HP motor leaves no stone unturned, collecting every contaminant in its path. Quiet system creates 50 to 60 dB of noise and is controllable up to 26 feet away with the included remote. The lightweight design weighs in at a mere 31 pounds. Combine this with the attached carrying handle and eyebolts for easy mobility, mounting and installation. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between three speeds of 300, 350 and 400 cfm depending on what the situation calls for. With the time feature, you don't even have to worry about turning off your machine. Simply set the timer and the machine will turn off on its own once the time runs out, allowing you to easily give your workshop a thorough cleanse at the end of a day of woodworking without having to be present. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System is backed by a two-year warranty, a helpful customer service phone line, and a nationwide network of experienced technicians. Remember when you could breathe easy in your workshop? Remember WEN.
Ingersoll Rand Air Hammer 114GQC

Ingersoll Rand Air Hammer 114GQC

List Price: $49.99
Price: $38.99
SKIL 6445-04 7.0 Amp 1/2 In. Hammer Drill

SKIL 6445-04 7.0 Amp 1/2 In. Hammer Drill

List Price: $39.98
Price: $39.97
This powerful SKIL 6445-04 7 Amp 1/2 In. corded hammer drill is the ideal tool for tough applications. The 1/2 In. keyed chuck accepts larger diameter bits designed for woodworking and cutting while the side-assist handle provides more support when needed. The variable speed trigger accelerates smoothly from low to high speeds, while the 2-finger trigger with lock-on option gives you even more control.
DEWALT DWE6421K Random Orbit Sander Kit, 5"

DEWALT DWE6421K Random Orbit Sander Kit, 5"

List Price: $64.00
Price: $59.00
The DEWALT DWE6421 5" Random Orbit Sander Kit features a 3.0 Amp motor that spins the pad at 12,000 OPM. The shorter height of this sander allows the user to get closer to work piece. It has a rubber over-mold in all of the critical areas of the sander and a separate counterweight design reduces vibration. The switch is dust-sealed to protect against dust ingestion for longer switch life. This sander offers improved dust collection and interfacing with our vacuum locking system; the dust bag has innovative one-hand locking system, the dust port is designed to fit directly to DWV010 or DWV012 dust collectors. To attach dust port to other vacs with 1-1/4" hoses use DWV9000 universal quick connector. Commonly used for sanding wood, sanding metal and sanding plastics. Includes: Sander, Owners Manual, Dust Bag, Carrying Case (bag).
SKIL 7510-01 Sandcat 6 Amp 3-Inch x 18-Inch Belt Sander with Pressure Control

SKIL 7510-01 Sandcat 6 Amp 3-Inch x 18-Inch Belt Sander with Pressure Control

List Price: $44.83
Price: $39.98
Sands any type of wood surface, micro filter dust canister helps keep work area clean, auto track belt alignment keeps belt centered, soft grip, flush edge sanding, Lock-on on/off switch, attachment for shop vacuum controls dust as you sand. Specs: 120V, RPM (loaded) 1050, 6 ft. cord length, weight 8.2 lbs. Includes: (1) sanding belt, dust collection canister, vacuum adaptor.