EasyHeat 2502 Freeze Free Heating Cable - 500'

EasyHeat 2502 Freeze Free Heating Cable - 500'

List Price: $711.58
Price: $711.58
EasyHeat Freeze Free self-regulating pipe heating cables provide flexible protection against pipe freeze-ups in the most challenging applications. The cut-to-length technology is ideal for installations that require protection of numerous pipes of varied lengths. The self-regulating effect of the cable reduces power consumption when the pipe does not require freeze protection. They are ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures; water supply lines underneath manufactured homes; and cottages, barns and outbuildings that are not regularly used.
Frost King HC30A Heating Cables, 30', Black

Frost King HC30A Heating Cables, 30', Black

List Price: $39.99
Price: $23.41
Frost King automatic heat cables with self regulating thermostat keeps pipes from freezing down to as cold as 38 below zero. Available in lengths from 3' to 30'.
HEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

HEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

List Price: $180.00
Price: $65.99
Why can JHSF pipe heating cable give you a safe, healthy energy saving and durable water pipe?
The self regulating heating core continuously adjusts its heat output to the environment at every point along the heating cable, thus the overall energy cost for the season is much lower. Energy-efficient.
JHSF pipe heating cable was approved by ETL. Pre-assemble pipe heating cable make installation easy for do-it-yourselfers. The plug, thermostat, end seal, self regulating heating cable were pre-assembled. More efficient, reliable and saving money.
Self regulating heating cable: no worry about any potential fire hazard due to the overheat. More safe than other non self regulating heating cable.
JHSF can be straight-traced, spiral , or overlap. Especially for better protected the valve. It can be used on water filled plastic and metal water pipes. It will be more convenient in your job.
Each Cable consists of tough thermoplastic inner insulation, a continuous ground braid and weather resistant thermoplastic out jacket. In the connection, JHSF takes the industrial grade heat shrinkage tube technology to make the cable more durable.
How about the manufacturer?
The factory meet ISO9001 standard (audit by BV)in the production process and the company take a very strict requirement on the incoming material, production process control, finish good inspection etc. Advanced product structure engineering design, good raw material, strict production process, strict internal management plus many years maneuvering experience make JHSF more reliable.
Warning
Never alter or cut the length of the heating cable in any way. Any alteration may result in electrical shock or fire.
Never use with indoor pipes. Cable should not run through the building walls, ceilings or floors.
Never use metal binding to secure heating cable to pipe.
Never use on flexible vinyl tubing(such as garden hoses).
EASY HEAT TV109374 5PK Gel End Cap

EASY HEAT TV109374 5PK Gel End Cap

List Price: $10.79
Price: $12.34
The produt is easy to use. The product is highly durable and handle. The product is manufactured in China.
WRAP-ON Pipe Heating Cable - 9-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31009

WRAP-ON Pipe Heating Cable - 9-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31009

List Price: $18.56
Price: $13.52
Prevents frozen water pipes to –50F. Simply wrap on, insulate and plug in. Engineered for use on metal and rigid plastic pipes. Uses an exclusive Press-To-Test button so you can test the cable before installing. A built-in thermostat turns the cable on at 38F. Proven low-wattage design uses up to 65 percent less energy at 2 watts a foot vs. other cables at 7 watts a foot, and protects to –50F. An exclusive power sensor light glows when the thermostat is closed. Each package contains one ready-to-install pipe heating cable along with installation instructions. To install, you will also need PVC/electrical tape, fiberglass pipe insulation, a tape measure and eye protection. Warning: This cable has been designed for the sole purpose of preventing metal and rigid plastic water filled lines from freezing. DO NOT use this product on fuel lines, drain lines, hoses or buried pipes. Fiberglass pipe wrap is required to complete the installation. Read and follow all instructions. Cables are available in various lengths. See chart to determine the length required for your application.
Easy Heat HCA 30-Foot by 1/2-Inch Cold Weather Valve and Pipe Heating Cable Application Tape

Easy Heat HCA 30-Foot by 1/2-Inch Cold Weather Valve and Pipe Heating Cable Application Tape

List Price: $14.99
Price: $7.78
For use with Easy Heat pipe heating cable. Wraps around cable and pipe. States that pipe is being electrically heated on outside of tape.
Heat it HISD 9-feet Pipe Heating Cable with Thermostat

Heat it HISD 9-feet Pipe Heating Cable with Thermostat

List Price: $65.99
Price: $21.73
Why can HISD pipe heating cable give you a safe, healthy energy saving and durable water pipe? The plug of HISD owned the indication light to show you whether there is electricity or not. With the build in thermostat, you can save more energy. HISD pipe heating cable was approved by both CSA and ETL. You can have more confidence on the product safety. Pre-assemble pipe heating cable make installation easy for do-it-yourselfers. HISD owned the aluminum foil and the tinned copper braid to make sure the 100% screen rate to make the product more healthy and more stable. In the connection, HISD take the industrial grade heat shrinkage tube technology to make the cable more durable. How about the manufacturer? The factory meet ISO9001 standard (audit by BV)in the production process and the company take a very strict requirement on the incoming material, production process control, finish good inspection etc. Advanced product structure engineering design, good raw material, strict production process, strict internal management plus many years maneuvering experience make HISD more reliable. Application tips The HISD is pre-assemble and easy to install, protect the pipe diameters up to 1.5" from freezing. You can choose different lengths based on the chart in the instruction. Warning Never allow heating cable to touch, cross or overlap itself at any points. No crossing. No spiraling. Never install heating cable on plastic pipe unless pipe is filled with water all the times. Do not install the same cable on more than one pipe. While it is coiled, never plug in the heating cable. Never alter this heating cable in any way. The thermostat and the entire heating cable has to be in contact with the pipe. Combustible material must not be within 1/2 in. of completed installation. Never use metal binding to secure heating cable to pipe.
Heavy Duty Ice Dam Heat Tape By Radiant Solutions Company, Plug-In, Self-Regulating, 120 volt with 48” lead and plug that illuminates while cable is in use (75 Feet)

Heavy Duty Ice Dam Heat Tape By Radiant Solutions Company, Plug-In, Self-Regulating, 120 volt with 48” lead and plug that illuminates while cable is in use (75 Feet)

List Price: $189.95
Price: $189.95
Goodbye ice dams on your roof and in your gutters. We are a direct-to-consumer manufacturer with over 25 years in the business of ice dam prevention. Don't buy cheap cables (yes, we mean you, EasyHeat). Our Self-regulating heat tape can be overlapped during installation, unlike the cheap stuff, which will burn out when it happens to overlap. Our heat cable generates 9.6 watts per foot of output at 32 degrees, creating a clear melted pathway through any ice or snow on your roof. This is not your grandpa's heat cable. This is serious stuff and holding it in your hand will tell you as much. Our pre-terminated, plug-in ready heat cables are ideal for people with areas on their home that suffer from reoccurring ice dams. HeatTapePro is a worry-free, long term solution to your ice dam problems. Because this product is self-regulating, it 'asks' for more energy as it gets colder outside and less energy when it's warmer. Why have heat cables running when it's 45 degrees outside? That is how cheap, constant wattage heat cables operate. Not good. HeatTapePro is jacketed with a commercial grade fluoropolymer and comes standard with a flame retardant thermoplastic interior jacket. Our 16 gauge heating wires are 200% thicker than the conductors found in cheap, constant wattage cables like EasyHeat. Thicker conductors mean greater heating efficiency, more melting power and longterm cable integrity. And speaking of quality, our unheated lead 14 gauge wire is 48" and comes standard with an illuminated plug that confirms your cable is working. Our self-regulating heat tape, also called heat cable, can be used for a number of applications beyond ice dam prevention, including pipe freeze protection. It's suitable on pipes as small as ½" in diameter and can be used on both metal and plastic pipes. HeatTapePro does not require the use of a thermostat for efficient operation. Be sure to order recommended installation accessories including Roof Clips and Downspout Hangers if needed.
GripClip Roof Cable Clip for Securing Ice Dam Heat Tape, Heat Cable and Holiday Lighting to Roofs (25pack)

GripClip Roof Cable Clip for Securing Ice Dam Heat Tape, Heat Cable and Holiday Lighting to Roofs (25pack)

List Price: $46.95
Price: $52.00
Old-school self-regulating heat cable roof clips require that you drive nails straight into your roof. Bummer. Certain roofing manufactures have suggested that this may void their warranties. Bigger bummer. The GripClip installs in around 3 seconds and requires no nails or tools. The body of the GripClip is a 'toothy pincher' that is pushed up onto the roofing material and it grips like crazy. The lower half is a cradle that is bent down over the cable to hold it in a way that will not result in damage or wear, thus maintaining cable manufacturers warranties. Installers of ice dam heat tape absolutely love the GripClip because they don't have to juggle fasteners and tools while scurrying around on a roof. Also, increased installation speed translates directly into increased profits. If you have every installed heat cable or heat tape, including EasyHeat, you will appreciate having clips that are both tenacious and easily removable. The GripClip is the only solution in the world that satisfies those goals. EasyHeat ice dam heat cable systems usually fail because the clips let go of the roof and the cable ends up touching itself and burning out. GripClips prevent this from happening. The GripClip is the only clip that allows for a building code compliant application of self-regulating heat cables near the center of the valley, where you want them. Using traditional clips requires that fasteners are driven through the valley flashing, which violates building code and common sense. Ho. Ho. Ho. Have you ever used those crappy, plastic clips to install holiday lighting on your home? They last one season if you are lucky. The GripClip can be used for many years to hold string lights in position. Visit us online for more information at www.radiantsolutionscompany.com The GripClip was invented by Steve Kuhl, daddy and founder of The Ice Dam Company, the country's largest and oldest ice dam removal and prevention business.
Schluter Ditra-Heat DHEHK12043  120-Volt 141.1 Feet Heating Cable

Schluter Ditra-Heat DHEHK12043 120-Volt 141.1 Feet Heating Cable

List Price: $239.00
Price: $239.00
DHEHK12043 120V ( 42.7 Ft² ) 540W Schluter-DITRA-HEAT is a modern, advanced under-tile floor heating system. A significant refinement on the underfloor heating systems from the last decade, it is thicker, easier to install, and is entirely waterproof. This is a roll of the heating wire used with the new DITRA-HEAT system. It is designed to be laid into the DITRA-HEAT underfloor tile membrane, and works with DITRA-HEAT thermostats to provide gentle, even heat to the tile it has been laid under. Product Features Strong and Robust Cable Schluter-DITRA-HEAT heating cables are very well manufactured, and have the durability they need to stand the test of time. Versatile Layout The cables can be laid in nearly any layout imaginable inside of the DITRA-HEAT membrane sheets, allowing you to fit your radiant floor perfectly to your tiled room's layout. No Clips or Fasteners Needed The heating cables lock into the DITRA-HEAT membrane without any other accessories or tools, making clips, fasteners, and other wire stabilizers a thing of the past.