- Carrier/backing: nitrile butadiene rubber (nbr) polymeric foam. Adhesive: acrylic
- Thickness: 122 mils (carrier, adhesive, liner) 118 mils (carrier, adhesive) 4 mils (liner). elongation: 126 percent
- Tensile strength: 6 pounds per inch (longitudinal)
- Service/operating temperature: -20F to 180F
- Core: 3 inch
Shurtape IT-100 Pipe Wrap Insulation Tape is a 43 mil foam tape, utilizing a closed cell elastomeric insulation backing, used to cover pipes to inhibit condensation. Designed for covering cold pipes to prevent condensation dripping, or covering hot pipes to reduce heat loss on a variety of pipe surfaces. Aggressive acrylic adhesive adheres well to metal pipes and PVC. Shurtape IT 100 is used for pipe wrapping so only has adhesive on one side of the tape. Thermal conductivity is 0.28 at 75 deg;F, in accordance with ASTM C-177. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 30 ft.Technical InformationCore: 3 inch diameterBacking/Carrier: Nitrile Butadiene Rubber (NBR) polymeric foamAdhesive: acrylicRelease Liner: yellow siliconized paperThickness: 122 mils (carrier, adhesive, liner) 118 mils (carrier, adhesive) 4 mils (liner)Tensile Strength: 6 pounds per inch (longitudinal) Service/Operating Temperature: -20F to 180FElongation: 126 %.