Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm with Battery Backup

Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm with Battery Backup

List Price: $65.99
Price: $39.99
408-900-0113-02 Features: -Digital display. -Test/reset button. -1 second alarm and ''gas'' on display for gas detection. -4 quick beeps for CO alarm. -Gas Type: Carbon Monoxide, Gas. -Sensor Type: Electrochemical. Product Type: -Carbon Monoxide Detector. Orientation: -Wall/Ceiling Mounted. Power Source(s): -9V Battery. Mounting: -Wall. Compliance, Standards: -UL Listed. Generic Specifications: -Power Source: 120 VAC. -Sound Level: 85 dB. Dimensions: Overall Height - Top to Bottom: -11.25". Overall Width - Side to Side: -7.5". Overall Depth - Front to Back: -2.25". Overall Product Weight: -1.5 lbs.
MTI Industries 20-441-P-WT Safe T Alert 20 Series Propane/LP Gas Alarm - White

MTI Industries 20-441-P-WT Safe T Alert 20 Series Propane/LP Gas Alarm - White

List Price: $63.25
Price: $52.95
The Safe T Alert 20 Series Propane/LP Gas Alarm is designed for the rugged RV environment and is ideal for travel trailers, fifth wheels, trucks and folding campers. It features advanced technology with an "Alarm Mute" button that silences the alarm when the RV is ventilated and rapid recovery sensor that resets when silenced or reactivates if dangerous levels of propane remain. Easy 12 Volt installation means there will be no missing or dead batteries to replace. Meets RVIA/NFPA requirements. Listed to UL 1484 RV.
General Tools PNG2000A Natural Gas Detector Pen

General Tools PNG2000A Natural Gas Detector Pen

List Price: $49.95
Price: $34.48
'Combustible Gas Detector Pen, Detects Liquid Natural Gas, Propane (LPG), Methane, Butane, Audible and LEDs: Green, On; Yellow, 500 ppm; Red, 200 ppm Indicator'
AirRadio Home Use Natural Gas Detector Combustible Gas Leak Alarm with Methane Sensor I1

AirRadio Home Use Natural Gas Detector Combustible Gas Leak Alarm with Methane Sensor I1

List Price: $29.98
Price: $29.98
Description Airradio I1 gas detector adopts high quality gas sensor and advanced technology. Easy to install and operate. When the natural gas concentration in the air reaches the 7% level, the detector will give audio and video alarming promptly, which informs the user to adopt measurement to avoid the fire, explosion etc. dangerous accidents happening. Specification Model Number: I1 Target Gas: Methane CH4 Working environment: Temperature: -20 to 40 ℃ Humidity: ≤ 95% RH (no frost) Sampling method: Natural diffusion Detecting Range: 0~100% LEL Alarm presetting level: 7% LEL Self-test Time: 180S Sensor Type: Semiconductor Lifespan: 5 Years Working Voltage: AC 100V - 240V Alarm Method: Visible and audible Alarm Volume: 70dB Net Weight: 100g Dimension: 59mm x 59mm x 40mm Indicator Status Description Solid Green- Normal status Green Flashing- Self-test is in progress Yellow Flashing- Fault condition ( under the circumstances, you need to clean up the dust or oil) Red Flashing- Alarming Sweet Note 1. More than 10,000 tests, we define 7% LEL is a very safe and reasonable value, so please feel relieved to use. 2. This product requires regular cleaning and self-test, the proposed six months cleaning and self-test time! Alarm Installation Please install the detector 12 inch below the ceiling and 59 inch away from the gas appliances to detect the natural gas because it is lighter than air. Package List AirRadio Natural Gas Detector x 1 User Manual x 1 Thanks for Reading! Best regards.
USI Electric MCN108 Hardwired 2-in-1 Carbon Monoxide and Natural Gas Smart Alarm with Battery Backup

USI Electric MCN108 Hardwired 2-in-1 Carbon Monoxide and Natural Gas Smart Alarm with Battery Backup

List Price: $42.47
Price: $31.49
Carbon monoxide and natural gas leaks are a silent, invisible threat to you and your family. This 2-in1 Carbon Monoxide & Natural Gas Alarm protects your home with a dual sensing alarm and Smart Alarm technology that reduces the occurrence of nuisance alarms. Easy to install, either as a new alarm a replacement, or a retrofitting, this alarm fits any standard wiring junction, single gang, round or octagon box up to 4" with a large mounting base that covers drywall imperfections and old paint marks. The front-loaded battery drawer provides peace of mind during power shortages. This 2-in-1 Alarm can be interconnected with other Universal alarms, using Quick Find alarm origination to easily identify the first alarm that sounds in an interconnected system. USI (Universal Security Instruments, Inc.) makes the most innovative home protection solutions available today. Saving lives is what we do for a living.
General Tools NGD268 Digital Combustible Gas Leak Detector, Extreme Environments

General Tools NGD268 Digital Combustible Gas Leak Detector, Extreme Environments

List Price: $199.99
Price: $161.03
Detects: methane, natural gases, coal gases, hexane, propane, ethane, butane, pentane, isopropyl alcohol, halogenated hydrocarbons (methanol, ethanol, butanol), ether, ketones (butone, protone) Also detects: hydrogen, toluene, gasoline, industrial solvents, lacquers, refrigerants, sulfur dioxide, ammonia, sulfured hydrogen, acetic acid . Gas leak detector features a long and flexible gooseneck probe, 30-level light/tricolor LED & audio indication, and Gas Concentration Alarm . Gas sensitivity: 50ppm - 100-Percent LEL (lower explosive limit) . Quick Response: Startup time less than 30 seconds, Response time less than 3 seconds . Gas detector uses a NiMH 4.8v rechargeable battery; AC adaptor included.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS
ZANBO Combustible Natural Gas Detector Alarm for Home with Standard US Plug Gas Detector Sensor

ZANBO Combustible Natural Gas Detector Alarm for Home with Standard US Plug Gas Detector Sensor

List Price: $19.99
Price: $9.99
Technical Parameters Detecting gas: Natural Gas, CH4(Methane) Working voltage: AC220V±15%, 50Hz/DC10V-24V Static current:≤100mA(DC12V) Alarm current:≤150mA(DC12V) Alarm concentration:6%LEL Alarm concentration erroe:±3%LEL Buzzer: ≥70DB(1m) Operating condition: 0~55 degree, indoor use type Stability: Regular alarm density error≤5%LEL Repeatability: Repeated test alarm density erroe≤±3%LEL Sampling method: Natural diffusion Consumption: ≤3W(AC) Alarm mode:Sound&Flash, NO/NC Dimension: 120*68032mm Weight: 103g TWO YEAR WARRANTY Installation 1. Suitable installation is 0.3-1.0m lower than ceiling and at least 1.5m far from the gas source radius. 2. Fix the board on the selected place by screw, insert the detector and revolve it, then chek if it's firm or not. 3. For home installation, please don't install the detecor near gas stove, the ventilators, windows and shower room. Maintenance After long time use of gas detector, the gas convention window would caused the adhesion of oil, which effect the sentive of detector. Please clean the gas convention window every 3 month. Please also avoid the cleanser to flow into the detector. Retest the detector after cleaning. Packing list Gas detector alarm *1 User manual *1 Installation screw *2
Digital Programmable Carbon Monoxide Monitor (CO Pro)

Digital Programmable Carbon Monoxide Monitor (CO Pro)

List Price: $149.00
Price: $179.00
Intrinsically safe,waterproof and programmable. Introducing a world class personal CO meter reliable and affordable. Set your own high and low alarm points. Waterproof and dust proof. Time Weighted average for carbon monoxide exposure (24 hour). A wearable, programmable real time display carbon monoxide detector for the modern work force. Set your own alarm points to meet your specific industry needs! The Sensorcon Industrial Pro is a truly unique carbon monoxide meter for multiple applications, from first responders to garage mechanics to over the road truck drivers. Waterproof, dust proof, and extremely durable, the Industrial Pro will function in the harshest environments. And with our new TWA (Time Weighted Average) Exposure feature, you'll always know your exposure level over a 24 hour period. The Sensorcon Industrial Pro Carbon Monoxide Monitor is the only handheld you'll need. Low Alarm Set Points: You can program the CO alarm to trigger as low as 5 PPM or as high as 100 PPM. Increments of 1 PPM. High Alarm Set Points: Works in multiples of 5, so the low set point for the High Carbon Monoxide Alarm is the next multiple of 5 after the Low Alarm point. For example, setting the low alarm from 5 through 9 will allow you to set the High Alarm at 10, 15, 20, etc, up to 500. Time Weighted Average: Our TWA for CO exposure breaks the last 24 hours the unit was active into 8 hour segments, and returns the highest value of exposure. So looking at your TWA for carbon monoxide exposure at 8 AM will return the highest average exposure for any 8 hour period, starting with 8 AM the previous day.It is recommended BUT not mandatory that after the unit displays (EOL) that the unit be shipped back to the manufacture for installation of a new sensor and re-calibration, although the unit will continue working after (EOL) is displayed the measurements will not be as accurate. *Please note that there will be a 15% restocking fee for units that are returned that are not defective*
BW Technologies XT-XWHM-Y-NA GasAlertMax XT II 4-Gas Detector with Pump, Combustible, O2, H2S and CO, Yellow

BW Technologies XT-XWHM-Y-NA GasAlertMax XT II 4-Gas Detector with Pump, Combustible, O2, H2S and CO, Yellow

List Price: $865.00
Price: $695.00
The BW Technologies XT-XWHM-Y-NA GasAlertMax XT II 4-gas detector with pump is a handheld, four-gas detector that uses an electrochemical cell sensor to monitor ambient H2S and carbon monoxide (CO), a capillary pore fuel cell to measure oxygen levels, and a catalytic bead sensor to monitor ambient combustible gases continuously. It has audio, visual, and vibration alarms, which alert simultaneously when gases reach any of four preset levels. The integrated diaphragm pump allows for localized sampling of the atmosphere for more precise readings than those generated through diffusion. The detector has an alphanumeric LCD screen that shows real-time concentration of four monitored gases, the alarm type, the calibration requirements, the self-test pass or fail, and the battery life remaining. The LCD also displays a constant flashing heartbeat icon to indicate normal functioning. The detector is operated and adjusted with a single push button. It is used to indicate potentially harmful levels of gases naturally occurring in the environment; in a variety of occupational settings such as petroleum refineries, tanneries, sewage treatment facilities, and paper mills; and in other personal safety, educational, and ambient monitoring applications. This detector is set to alert to when gas levels reach any of four limits: a low-alarm level, indicating moderate danger; a high-alarm level, indicating significant danger; a short-term exposure limit (STEL), the maximum gas concentration to which workers can be exposed continuously for a short period of time without serious risk; and a time-weighted average (TWA) limit, the maximum average exposure that personnel can experience over an eight-hour work shift without serious risk. The 95 dB audible alarm sounds at different speeds to indicate the alarm type, and the three bright, wide-angled LED alarm bars and the built-in vibration alarm help alert the user to potentially dangerous levels of gases in high-noise conditions. The detector logs and retains data of the 10 most recent gas exposure events, which it can transmit via an infrared Datalink USB adapter to a personal computer (both sold separately). This product is powered by a replaceable AA alkaline battery that provides up to 14 hours of operational life. To ensure performance, the detector tests its sensor integrity, circuitry, and audible and visual alarms upon activation. It tests its battery upon activation and continuously during operation. The detector also features an automatic shutdown mode for additional safety, which activates when the detector fails its self-test. This detector comes with a back-mounted alligator clip to allow the unit to be worn on a belt, waistband, or lapel, and built in concussion-proof housing to help protect it against damage. It is water resistant, and is compatible with the BW Technologies MicroDock II automatic test system (sold separately). It has a European Conformity (CE) and ATEX certification in accordance with Directive 2004/108/EC for electromagnetic compatibility of electric and electronic equipment, and it is classified by Underwriters Laboratory (UL) to U.S. and Canadian standards as an Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, Division I, Group A, B, C , and D. It has an ingress protection (IP) rating of 66/67.

Specifications

Gas TypesH2S, carbon monoxide (CO), oxygen (O2), Combustible Gases (%LEL)
Measuring Range H2S: 0 to 200 ppmCO: 0 to 1,000 ppmO2: 0 to 30%Combustible: 0 to 100% LEL, 0 to 5% v/v
Resolution H2: 1.0 ppmCO: 1.0 ppmO2: 0.1%Combustible: 1% LEL, 0.1% v/v
Temperature Range-4 to +122 degree F/-20 to +50 degree C
Humidity Range10% to 100% RH (non-condensing)
Audible Alarm Sound Level95 dB
Dimensions5.1 x 3.2 x 1.9 inches/13.0 x 8.1 x 4.7 cm (H x W x D)*
Weight11.92 oz./338 g
BatteryAA alkaline with 14 hour life(at +68 to 122 degree F/+20 to 50 degree C)
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A gas detector is a safety device that detects and monitors various toxic, combustible, and flammable gasses in an area, and which can also register a decrease in ambient oxygen. Gas detectors can be portable or stationary, and are typically classified by their detection methods, which include catalytic, electro-chemical, point infrared, open-path infrared, semiconductor, thermal path conductor, and paper tape detection. Gas detectors are first calibrated to known gasses that serve as a reference points. Their sensors can then be used to measure ambient gas concentrations in comparison to the calibration gasses. When gas concentrations exceed a pre-set limit, an alarm or signal is triggered, alerting the user to potential danger. Pre-set limits often include a low-alarm level, indicating a gas concentration that poses a moderate danger; a high-alarm level, indicating a gas concentration that poses a large danger; a short-term exposure limit (STEL), the maximum gas concentration to which workers can be exposed continuously for a short period of time without serious risk of harm, and time-weighted average (TWA) limit, the maximum average exposure personnel can experience over the course of an eight-hour work shift without serious risk of harm. Most gas detectors also feature LCD screens that provide a variety of information including gasses detected and their concentrations, pre-set exposure limits, and battery level. Gas detectors have a variety of industrial and governmental applications, such as in fire and rescue, mining, construction, petroleum refineries, tanneries, sewage treatment facilities, and paper mills. Portable gas detectors are typically used to monitor the air around personnel, are worn on clothing or on belts or harnesses, and are powered with rechargeable or disposable batteries. They generally require periodic calibration, testing, and battery recharging or replacement, although some fixed-life detectors are designed to perform for a number of years without calibration or battery replacement before being discarded. Stationary gas detectors are typically powered electrically and mounted near the process area of a plant or control room. They also require periodic service, testing, and calibration. BW Technologies by Honeywell manufactures and distributes portable and fixed gas monitoring equipment for use in a wide range of industries. The company, founded in 1987, is based in Canada in Calgary, Alberta.
Gas Clip Technologies SGC-H Single Gas Clip H2S, 2 Year Hydrogen Sulfide (H₂S) Detector, Set Points: Low-10 ppm High-15 ppm

Gas Clip Technologies SGC-H Single Gas Clip H2S, 2 Year Hydrogen Sulfide (H₂S) Detector, Set Points: Low-10 ppm High-15 ppm

List Price: $114.88
Price: $109.39
Single gas detector for Hydrogen sulfide (h₂s). measuring range: 0 to 100 ppm. Resolution: 0.1 ppm. Operating temperature range: -40 Degrees C to +50 Degrees C (-40 Degrees F to +122 Degrees F). alarm setting: low 10 ppm, high 15 ppm. Adjustable alarm set points and bump Check reminder. Alarm Type: audible (minimum 95dB), visual & vibrating. Tests: full function self-test on activation & every 20 hours; continuous automatic battery tests. Battery Type: Lithium ion. Operational life: 2 Yrs. Display: LCD. Size: Height 3.37 in., width 1.97 in., depth 1.15 in., weight 2.7 oz. (76G). real-time gas display or time remaining. Programmable unique 6 digit unit identification. Two-way IR commas for event downloads, bump tests & updates. Calibration optional. Ratings: EMC Directives 2004/108/EC IP 67. Housing color: yellow. Includes calibration cap & quick start guide. Docking capability with Gas Clip Technologies sgc dock.