Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber

Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber

List Price: $75.67
Price: $71.74
Breathe easy with the Hakko FA-400 bench top smoke absorber. The FA-400 removes soldering smoke and fumes quickly, safely and efficiently. The unit can be used in a vertical (standing up) position or low-profile position (laying down.) When used in the low-profile (laying down) position, efficiency and air flow is increased by approximately 2.6 times.
Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator Smoke Prevention Absorber DIY Working Fan

Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator Smoke Prevention Absorber DIY Working Fan

List Price: $26.99
Price: $26.99
Kulannder DIY working Fan believed in handy carry and sturdy Solder Smoke Absorber, also can use a cooler fan on working table. It's easy to DIY operating by yourself, just soldering, drivepipe and lock the screw, then finish a best and useful DIY Remover Fume Extrator or a cooler working fan.
NOTES:
1, Te best working position: the distance between Solder point and Fans no more than 20cm.
2, Don't constant working over 24hours.
Features:
1, Power consumption: 30W
2, Maximum air flow: 2000ml/min
3, Working temperature: -30 to 70 degree
4, Lifetime: 50,000 hours
5, Certification: UL\CUL\CCC\CE \TUV\tuvEMC\ROHS
6, Weight: 1.3lb
7, Size: 8.8'*6'*2.4'
Flexzion Solder Fume Extractor Smoke Absorber - Benchtop Flux Fume Air Filter Exhaust Fan Ventilation System Portable Adjustable Angle with Activated Carbon Filter for Soldering Bench Top Work Station

Flexzion Solder Fume Extractor Smoke Absorber - Benchtop Flux Fume Air Filter Exhaust Fan Ventilation System Portable Adjustable Angle with Activated Carbon Filter for Soldering Bench Top Work Station

List Price: $25.99
Price: $25.99
A soldering flux is required in soldering and the main ingredient of soldering flux is rosin. Rosin mainly consists of abietic acid, which will be transformed into neoabietic acid under high temperature. In this process, the toxic components will be produced and volatilized into gas, which causes headache, dizzy, vomit, eye disease etc. This ESD-safe smoke extractor soldering absorber removes fumes from the soldering area and passes them through an active carbon filter and clean the odors from the air, effectively absorb toxic gases and provides a safe working condition.Specification:
  • Power supply: AC120, 60Hz
  • Power consumption: 30W
  • Maximum air flow: 1000L/min
  • Inlet concentration: 2(mg/L)
  • Dimensions: 8.7 x 10.6 x 6.6 in
  • Weight: 2.33lb
  • Activated -- Carbon filer:
  • Size: 5.1 x 5.1 x 0.4 inch
  • Amount of activated carbon filter: 0.02lb
  • Max. Absorbing weight of components per one filter: 0.004lb
Package Content:
  • 1 X Solder Fume Extractor Smoke Absorber - Benchtop Flux Fume Air Filter Exhaust Fan Ventilation System Portable Adjustable Angle with Activated Carbon Filter for Soldering Bench Top Work Station
Aoyue AO486 486 Benchtop Solder Smoke Absorber

Aoyue AO486 486 Benchtop Solder Smoke Absorber

List Price: $35.99
Price: $35.99
It's time to breathe easy! This bench top fume extractor removes soldering smoke and fumes quickly, safely and efficiently. Great for electronics, arts and crafts, and stained glass work. Quiet yet powerful operation. Approx 37 cubic feet per minute airflow Activated carbon filter absorbs up to 80 percent of the odors from the air and is easy to replace ESD-safe by design Approx. 5"x5" filter area Unit measures Approx. 11"h x 8"w x 6"d One Extra replacement filter included.
ABLAZE Closed Column 90 Gram Tube with TriPod

ABLAZE Closed Column 90 Gram Tube with TriPod

List Price: $120.99
Price: $109.99
SHIPS FROM MANUFACTURER,ABLAZE MAKES SURE YOU GET THE BEST DEAL
Description:
This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and filling the extractor, This system allows the user to soak the material before opening the bottom valve to release the solvent and this extractor can also be used as open end extractor.DUAL FUNCTION INCLUDED: • Platinum Cure Silicone Non Stick Pad • 304 Stainless Material Tube 90 Gram Capacity Tube • TriPod Clamp and fittings • Viton Gasket and Viton Gasket Mesh Specifications: Operating Temperature Range: -30-200F Intake Fittings: Flare Fitting where Can tip adapter will fit in. Rated to 500psi, Working pressure will only reach 40-50 PSI when using solvent cans High Polish Interior
Jonard R-5926 Pin Extractor, 16-20 Contact Size, 3" Length

Jonard R-5926 Pin Extractor, 16-20 Contact Size, 3" Length

List Price: $11.50
Price: $10.00
The pin extractor is a plunger style pin extractor for pushing pins out from behind the connector blocks for contact sizes 16-20. 3" long. This Amp connector tool can be used on AMP CPC type connectors.
Valtcan Carbon Filter Replacement Activated 5 Pack for Hakko/Xytronic/Aoyue Smoke Absorber 130 mm x 130 mm x 10 mm 5 1/8” x 5 1/8” x 3/8”

Valtcan Carbon Filter Replacement Activated 5 Pack for Hakko/Xytronic/Aoyue Smoke Absorber 130 mm x 130 mm x 10 mm 5 1/8” x 5 1/8” x 3/8”

List Price: $21.00
Price: $15.00
A pack of 5 Replacement activated carbon filter for Valtcan Smoke Absorber filter, Xytronic 426DLX and 456DLX,and Aoyue 486 bench top smoke absorber. Individual carbon filter dimensions are 130 mm x 130 mm x 10 mm (5 1/8" x 5 1/8" x 3/8"). Solder fan not included. ***Valtcan solder fume absorber sold Separately***
Weller WSA350 120v Bench Top Smoke Absorber

Weller WSA350 120v Bench Top Smoke Absorber

List Price: $69.99
Price: $57.25
WELLER WSA350 SOLDER FUME AND SMOKE ABSORBER, 120VAC
Adjustable Solder Smoke/Fume Absorber, Remove Fume Extractor Absorber Fan Quiet Working Fan with Adjustable Table Clamp for ESD Soldering Station Work, Eliminate Toxic Fumes helpful for Health

Adjustable Solder Smoke/Fume Absorber, Remove Fume Extractor Absorber Fan Quiet Working Fan with Adjustable Table Clamp for ESD Soldering Station Work, Eliminate Toxic Fumes helpful for Health

List Price: $35.99
Price: $35.99
Kulannder adjustable solder smoke absorber is ideal for absorbing toxics, the filter consists of foam and activated carbon.
Features:
-Power consumption: 30W
-Maximum air flow: 2000ml/min
-Working temperature: -30 to 70 degree
-Lifetime: 50,000 hours
-Certification: UL\CUL\CCC\CE \TUV\tuvEMC\ROHS
-Weight: about 2.65lb
ABLAZE Glass Extractor Tube 5mm Thickness Kit

ABLAZE Glass Extractor Tube 5mm Thickness Kit

List Price: $39.99
Price: $33.99